Oil and Gas

Course catalogue

hits
351
Course code: MUK-134
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: GBP 40,-

Course Goal: This course aims to provide an overview of the use of pressurised cylinders, the risks involved and storage requirements

 

Learning Objectives

LO1 Define what is meant by a ‘pressurised cylinder’

LO2 Explain the use of pressurised cylinders in the Oil and Gas Industry

LO3 Identify the hazards posed by the use of pressurised cylinders

LO4 Explain the mitigation measures that can be used to control the risks created by the use of pressurised cylinders

LO5 Describe the correct storage methods for pressurised cylinders

Course code: MUK-138
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: GBP 40,-

Course Goal: This course aims to provide an introduction to the issues involved with successful environmental management in the Oil and Gas Industry

 

Learning Objectives:

 

LO1 Explain the importance of being an environmentally responsible company

LO2 Explain the purpose of an Environmental Management System (EMS) 

LO3 Explain the role of the Regulator

LO4 Explain the role of the Scottish Environment Protection Agency (SEPA) and the Environment Agency (EA)

LO5 Identify the main environmental issues of concern for the offshore Oil and Gas Industry

LO6 Describe how to ensure continual improvement in environmental performance

LO7 Explain the importance of monitoring and reporting all environmental issues 

LO8 Explain how you can play your part in improving environmental performance

Course code: MTP-070
Course type: E-learning course
Duration: 18 minutes
Language: English (US)
Price: GBP 40,-

This course aims to provide learners with an awareness of US best practice in relation to marine trash and debris.

This course covers the topics:

Origins

Environmental and health effects

Common causes,

Law and regulations

Preventive measures.

Course code: MUK-030
Course type: E-learning course
Duration: 35 minutes
Language: English
Price: GBP 40,-

Course Goal: This course aims to introduce learners to the concept of human factors and how they impact on situational awareness

 

Learning Objectives

LO1 Define what is meant by the term ‘human factors’

LO2 Identify the key contributors to the loss of situational awareness

LO3 Recognise the potential causes of stress and fatigue (both work and non-work related)

LO4 Recognise the symptoms of stress and fatigue in yourself and others

LO5 Explain how important good communication is in limiting incidents and accidents

LO6 Explain why following processes and procedures is a key part of ensuring safety in the workplace

LO7 Recognise how carefully pre-planning your actions, and responses, helps to improve performance and reduce human-based error

LO8 Explain how to maintain good situational awareness

Course code: MUK-189
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

 

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

 

Course code: MUK-013
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

This course aims to give offshore personnel a greater understanding of the hazards associated with packaging and cargo handling and the movement of cargo to, and from, offshore installations.

 

Course Content
-Explain the responsibilities and duties of all personnel and their duties under current legislation
-Explain the importance of checking for dropped objects and identify the areas that should be monitored
-Explain the key areas of safe lifting and slinging operations
-Explain the key principal points to be considered when preparing cargo for shipment to and from offshore
locations
-Describe the procedures involved for shipping freight by air
-Define what is classified as ‘Dangerous Goods by Sea’ and the main considerations for shipping
-Define what is classified as ‘Dangerous Goods by Air’ and the main considerations for shipping
-Explain the principal requirements for waste management
-Identify examples of bad practice

Course code: MUK-005
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Course Goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of maintaining fire awareness and the actions to take in the event of an emergency

Learning Objectives
LO1 Explain the key responsibilities of both the employer and the employee
LO2 Identify key fire safety legislative requirements
LO3 Recognise how to keep the workplace safe
LO4 Explain what to do upon hearing the fire alarm or upon discovering a fire
LO5 Identify the fire triangle and explain how it works
LO6 Identify typical ignition sources
LO7 Identify typical fuel sources
LO8 Explain how fire spreads
LO9 Identify different fire prevention measures
LO10 Explain the actions you should take in an emergency situation
LO11 Recognise the different types of fire-fighting equipment
LO12 Identify the different types of fire extinguishers and explain what each type is used for
LO13 Identify potential fire hazards

Course code: MUK-037
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English
Price: GBP 80,-

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations.

Target Audience: All relevant personnel

Course Overview

(Course Navigation and Welcome screens)

Section 1: An Introduction to Oil Treatment

LO1 Explain the theory behind the process of separation in the Oil and Gas Industry

LO2 Identify the most common types of separator

LO3 Identify the requirements for a test separator and explain how they are used to monitor individual well production

LO4 Give an overview of main oil line pumps and explain how they are deployed

Section 2: An Introduction to Gas Compression and Hydrate Prevention

LO5 Give an overview of the process of gas compression

LO6 Describe the different methods of chemical injection used for hydrate prevention (during gas export)

Section 3: An Introduction to Utility Systems

LO7 Identify the different utility systems in use in the Oil and Gas Industry

LO8 Describe the use of sea water lift pumps and water polishing systems

LO9 Describe the purpose of cooling systems and heat exchangers

LO10 Describe the use of heat medium systems

LO11 Describe the use of potable water systems

LO12 Describe the use of diesel storage systems for the bunkering, storage and distribution of diesel

Course code: MUK-219
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide personnel with an overview of US best practice in relation to working with hazardous energy and lockout/tagout procedures.

The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to define terms commonly used in a lockout/tagout program, describe specific lockout/tagout techniques commonly used in a lockout/tagout program, and recall standard lockout/tagout procedures. 

 

Learning Objectives:

 

LO1 Define what is meant by the term ‘energy isolation’ 

LO2 Define terms commonly used in lockout/tagout operations 

LO3 Explain why energy isolation is important to safe operations 

LO4 Identify the regulatory requirements for energy isolation 

LO5 Identify areas which are exempt from regulatory requirements

LO6 Give an overview of employers’ responsibilities

LO7 Give an overview of how the locking and tagging process operates

LO8 Explain what is contained within a typical lockout procedure

LO9 Identify the steps required for restoring equipment to service

Course code: MUK-004-FT
Course type: E-learning course
Duration: Not set
Language: English
Price: GBP 50,-

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This FAST TRACK course assesses the following Learning Objectives:

LO1 Explain the CoSHH regulations and their applicability to the Oil and Gas Industry
LO2 Explain the legal obligations under CoSHH for both employees and employers, and explain the REACH regulations
LO3 Explain the health effects of working with hazardous substances, and the various ways that these can enter the body
LO4 Explain the use of Material Safety Data Sheets, Labels and Assessments within the CoSHH regulations
LO5 Explain the common labelling system and identify the standard symbols
LO6 Explain the appropriate use of Personal Protective Equipment
LO7 Explain requirements for storage, handling and disposal of hazardous substances
LO8 Define the control measures for handling hazardous substances and explain the control hierarchy
LO9 Explain the process for dealing with hazardous substances in the event of a spill
LO10 Define the recording and reporting process within the CoSHH Regulations

Course code: MUK-206
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide personnel with an awareness of US best practice in relation to noise and hearing conservation in the workplace.

 

Learning Objectives

LO1 Describe noise-induced hearing loss, and identify the early warning signs and symptoms to look for

LO2 Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage

LO3 Explain the responsibilities and duties of employers and individual personnel under current legislation

LO4 Explain how noise is measured and identify permissible workplace exposure levels 

LO5 Explain the risk assessment requirements

LO6 Identify the control measures that should be taken to reduce exposure to noise

LO7 Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection; advantages, disadvantages and attenuation of various types of hearing protection; instructions on selection, fitting, use and care of hearing protection; and the purpose of audiometric testing and an explanation of the test procedures

LO8 Explain the importance of health surveillance

 

Course code: MUK-108
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Course goal: This course aims to provide the knowledge and techniques for carrying out effective toolbox talks

Target Audience: All relevant personnel, including work party members, Performing Authorities and Area Authorities

 

Learning Objectives

LO1 Define what is meant by a toolbox talk
LO2 Describe the communication process and explain its importance in carrying out a successful toolbox talk
LO3 Describe the verbal communication process
LO4 Describe the non-verbal communication process
LO5 Identify the main components of a toolbox talk
LO6 Identify the roles and responsibilities involved in a toolbox talk
LO7 Summarise the key points of a toolbox talk

Course code: MUK-204
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide learners with an overview of US best practice in relation to working safely with scaffolding.

Completion will allow learners to recognize the hazards associated with scaffolding and the type of scaffold being used at the work site and to understand the procedures required to control or minimize those hazards.

Target Audience: Personnel who use scaffolding during work tasks

 

Learning Objectives:

LO1 Describe safe practices for scaffolding operations

LO2 Identify different types of scaffolding and explain their uses, capacities, and safety considerations

LO3 Identify the hazards commonly associated with scaffolding operations and explain how these can be mitigated

LO4 Identify the PPE requirements for scaffolding operations, including the safe use of harnesses and fall protection 

LO5 Describe the specific precautions to take when working with scaffolding near power lines

LO6 Explain safe work practices that prevent falls and dropped objects from scaffolding

LO7 Explain what should be done in the event of an emergency 

 

Course code: MUK-156
Course type: E-learning course
Duration: 1 hour
Language: English
Price: GBP 80,-

Course Goal: This course aims tointroduce learners to different types of flanges and gaskets and their functions

 

Target Audience: Operations personnel

 

Learning Objectives:

LO1 Explain the importance of ensuring mechanical joint integrity

LO2 Describe what is meant by ‘a mechanical joint’

LO3 Identify different types of flanges and flange connections

LO4 Outline the function and purpose of flanges

LO5 Identify the different types of gaskets

LO6 Explain the function and purpose of gaskets

LO7 Outline the factors to consider when selecting the most appropriate joint assembly

LO8 Identify the most common types of flange and gasket arrangements

LO9 Describe how to install flanges correctly

LO10 Explain what should be checked when installing gaskets

LO11 Describe the principles of hand torque tightening

LO12 Describe the principles of hydraulic tensioning

LO13 Explain the importance of controlling tightening and the main methods used

Course code: MUK-210-FT
Course type: E-learning course
Duration: 35 minutes
Language: English (US)
Price: GBP 40,-

Course Goal: 

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

 

Learning Objectives:

 

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Course code: MUK-223
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide learners with an overview of US best practice in relation to working with forklift trucks.

This course aims to provide an awareness of how to operate a forklift truck in a safe and proper manner.

Course Level: Awareness

 

Learning Objectives:

 

LO1 Identify the regulatory requirements for forklift trucks

LO2 Give an overview of the differences between a forklift truck and a car

LO3 Explain the training requirements for forklift operators

LO4 Give an overview of the different categories of forklift trucks

LO5 Identify the typical components of a forklift truck

LO6 Identify the information provided on a forklift’s nameplate

LO7 Define what is mean by the terms ‘maximum load capacity’ and ‘rated load center’

LO8 Describe how to calculate the load capacity of a forklift truck

LO9 Explain the basic principles of how a forklift truck works

LO10 Describe the ‘stability triangle’

LO11 Identify common factors that can contribute to tip-over incidents

LO12 Explain what actions to take in the event of a tip-over

LO13 Describe OSHA’s requirements for the inspection of forklift trucks

LO14 Give an overview of best practice in relation to the safe operation of forklift trucks

LO15 Give an overview of refueling and recharging requirements

LO16 Give an overview of how forklift attachments can affect load capacity and safe operation

 

Course code: MUK-003
Course type: E-learning course
Duration: 45 minutes
Language: English (Latin America ...
Price: GBP 40,-

Este curso está diseñado para brindarle al personal costa afuera un conocimiento general sobre los peligros y medidas de control que se relacionan con las áreas de trabajo de la instalación en las que puede estar presente el H2S.

• Comprender mejor los peligros que se relacionan con el H2S y las medidas necesarias de detección y protección que deben tenerse y cumplirse

• Identificar los niveles y límites de exposición laboral legales que se han establecido para su protección.

• Explicar las responsabilidades de los empleadores en lo que respecta a la gestión de riesgos asociados a la posible exposición al H2S en el lugar de trabajo.

• Explicar las tareas de los empleados respecto de cumplir con los procedimientos pertinentes sobre H2S y seguir las pautas que proporcionan los empleadores o propietarios de las instalaciones.

Course code: NI-022
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: GBP 40,-

The course covers the following topics:

- How to handle substance abuse
- Drug policies
- AKAN

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: MUK-015
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Course goal: This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

Target Audience: All personnel within the Oil and Gas Industry

Learning Objectives

LO1 Define what is meant by Personal Protective Equipment (PPE)
LO2 Identify the different types of PPE
LO3 Identify the legal duties and obligations surrounding PPE
LO4 Describe the Hierarchy of Control measures and the use of PPE in relation to this
LO5 Explain the requirement for assessing the suitability and compatibility of PPE
LO6 Explain the maintenance requirements for PPE
LO7 Describe the duties and responsibilities of employees in relation to PPE
LO8 Explain the importance of PPE-related training, information and instruction

Course code: MUK-229
Course type: E-learning course
Duration: 45 Minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide learners of an awareness of US best practice in relation to confined space entry (CSE), hazardous atmospheres, and the necessary equipment, and permits required to work in confined spaces.

It will also examine the hazards and hazard control methods that are required to undertake work safely in a confined space and the actions that should be taken in an emergency.

 

Learning Objectives

 

LO1  Explain what is meant by a Confined Space

LO2  Give examples of Confined Spaces

LO3 Describe the dangers that can be caused by confined space entry work 

LO4 Identify OSHA requirements for permit-required entry operations

LO5 Explain how to avoid entering confined spaces

LO6 Explain the importance of having a Safe System of Work in place

LO7 Describe individual roles and responsibilities involved in Confined Space Entry work 

LO8 Explain the requirements for gas testing

LO9 Identify acceptable levels for atmospheric test results 

LO10  Give examples of Confined Space Entry site safety equipment

LO11  Explain the actions to take in an emergency 

LO12  Explain Confined Space Entry alarm procedures

Hits per page
| 1 6 ... |