Course catalogue

Who is the course for?

All personnel who may have to carry out manual handling duties.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with information to help reduce the risk of injury due to incorrect manual handling.

How will the course benefit my company?

By reducing lost time due to injury as a result of poor manual handling techniques.

What standards are referenced in the course?

• International Labour Organisation

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course Goal:

To ensure that the safety aspects of pressure testing and leak testing are known.

Who is the course for?

Engineers of all grades.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

To ensure that the safety aspects of pressure testing and leak testing are known.

How will the course benefit my company?

To reduce possible pressure testing and leak testing safety related incidents.

What standards are referenced in the course?

n/a

Is there an assessment? 

Yes

Who is the course for?

All trainee Maritime personnel working with fuel systems.

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

By providing you with an overview of fuel systems.

How will the course benefit my company?

By providing personnel with an overview of fuel systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Any deck & engine officer on a vessel sailing into polar waters.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

By providing you with an understanding of the Polar Water Operational Manual and its specific purpose for your vessel and to facilitate an easier vessel familiarisation using the actual manual onboard.

How will the course benefit my company?

Ensuring personnel are able to familiarise themselves with the specific rules and guidelines outlined in the vessel’s Polar Water Operational Manual to comply with the International Code for Ships Operating in Polar Waters.

What standards are referenced in the course?

• International Code for Ships Operating in Polar Waters (Polar Code)

• The International Convention for the Safety of Life at Sea (SOLAS)

• International Convention for the Prevention of Pollution of Ships (MARPOL)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Officers who are looking for an easy to follow supplement or refresher to their radar and ARPA courses and any other crewmember that requires an understanding of the general features of radar.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing you with technical background knowledge to ensure that you understand the both the potential and limitations of radar and ARPA equipment.

How will the course benefit my company?

By ensuring that personnel understand both the potential and limitations of radar and ARPA equipment in order to ensure safe operations on board.

What standards are referenced in the course?

IMO Radar Performance Standards (IMO (2004): Res.MSC.192(79)

The International Convention for the Safety of Life at Sea (SOLAS)

International Telecommunication Union (ITU) Recommendations (ITU (200): Rec.ITU-R.M.1313-1)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All crew and personnel who work on container ships and/or ships where containers are secured on board for stowage.

Is previous experience required?

It would be an advantage, however, this course acts as an introduction for someone who is about to be trained in container lashing safe use and inspection or for those working on shore in stowage.

How will the course benefit me?

This course will give learners an awareness of how containers are secured on board and how the equipment is used and maintained.

How will the course benefit my company?

The course will ensure that learners are following best practices as detailed in national and international legislation as well as company procedures.

What standards are referenced in the course?

• The International Convention for the Safety of Life at Sea (SOLAS) in respect to carriage of cargo, and the Cargo Securing Manual.

• International Safety Management (ISM) Code &; safety and pollution prevention, emergency procedures including safe handling of cargo and maintenance of lashing equipment.

• International Organization for Standardization (ISO).

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Personnel requiring an awareness or understanding of the role of Banksmen and Slingers.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give an overview of the roles of the Banksman and Slinger

How will this course benefit my company?

To ensure you have an overview of the roles of the Banksman and Slinger

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This course is for any person who interacts with, or is responsible for, the specification, design, operation and maintenance of assets that employ safety instrumented systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an awareness of the purpose and nature of safety systems deployed to protect people, the environment and plant in the areas that you work.

How will the course benefit my company?

By ensuring personnel have an understanding of safety instrumented systems.

What standards are referenced in the course?

IEC 61508

IEC 61511

IEC 62061

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Any navigator, technician or watchman requiring a basic understanding of radar.

Is previous experience required?

No previous experience is required.

How will this course benefit me?

By providing an introduction to radar systems and their use onboard vessels.

How will this course benefit my company?

By improving relevant personnel’s understanding of the functions, capabilities and limitations of radar.

What standards are referred to in this course?

IMO Resolution MSC 192(79) Revises Performance Standards for Radar Equipment

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course covers the theoretical part of the basic safety training for seafarers, which is mandatory for all personnel working on vessels. Through tuition and training in preventive safety, first aid, sea rescue and fire safety, the course teaches you to take care of your own safety and that of others. By taking the theoretical part of the course online, you cut down the time you need to attend an approved safety centre and save both time and money. 

Who is the course for?

All maintenance personnel on board who are involved in performing isolations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an overview of how to use mechanical isolations to ensure safe working.

How will the course benefit my company?

The course will ensure that the risk to personnel working on the various systems on board the ship are reduced by the use of mechanical isolations.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

IGF Advanced Webinar

Lectures will be presented remotely. Participants need a PC/tablet with camera, mic, speaker, pen and paper for the lectures. After enrolment, participant will receive a personal information about the course and code for "log in" to Mintra TrainingPortal. Compendiums for use in the course can be downloaded from TrainingPortal. A personal code for joining the webinar will be sent by Mail.                            

Mandatory requirements for personal COP IGF Advanced:

After fulfilling the lectures (Remotely), participants will need sailing experience (PA) on an IGF vessel and documentation of 3 bunkering’s. They will need to collect the sailing experience after they have recived their IGF Basic certificate. See more info at our homepage: www.gassteknikk.com / IGF COP or NMA's hompage: https://sdir.no 

Who is this course for?

This course is aimed at employees working in the US or subject to OSHA regulations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of an employee’s right to implement their stop work authority.

How will this course benefit my company?

By ensuring you are aware of an employee’s right to implement their stop work authority.

What standards are referred to in this course?

Workers’ Right to Refuse Dangerous Work

Is there an assessment?

Yes - Trainingportal assessment with an 80% pass mark and two attempts.

Who is the course for?

Any personnel who requires an awareness of the environmental impacts associated with merchant shipping waste and how these wastes can be managed.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an understanding of the types of waste generated by shipping, how these wastes impact the environment and the methods that can be used to reduce and manage waste.

How will the course benefit my company?

Environmentally aware personnel can help to reduce the environmental impacts of your operations and improve environmental performance.

What standards are referenced in the course?

The European Union (EU) Waste Framework Directive

The International Convention for the Prevention of Pollution from Ships (MARPOL) 1973 - Annex IV

Merchant Shipping (Prevention of Pollution by Sewage and Garbage from Ships) Regulations

Deposits in the Sea (Exemption) Order

Landfill Directive

Environmental Protection (Duty of Care) Regulations

Special/Hazardous Waste Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course is made for personnel who organize or perform: planning, installation, inspection and maintenance of Ex equipment.

The course gives an introduction and repetition in different subjects treated in the IEC 60079 Standard (NEK EN 60079).

The course duration is 5 hours and is valid for 5 years

The course can also be taken as a refresher course for Ex maintenance

Themes:

• Fundamental Ex philosophy, refresher

• Preparing and installing electrical equipment in hazardous areas

• Inspection and maintenance of electrical equipment in Ex areas

• Understand what maintenance tasks can be done locally, and what must be performed by an authorized workshop

• Give candidates for CompEx certification a solid background for the theoretical assessment

Who is this course for?

This course aims to provide learners with an awareness of US best practice in relation to the values that govern responsible corporate practice and personal behaviors in the workplace.

Is previous experience required?

No previous experience is required. 

How will this course benefit me?

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behavior in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. 

You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

How will this course benefit my company?

By ensuring that all personnel are familiar with applicable laws on human rights, equality, discrimination and corruption.

What standards are referred to in this course?

The Civil Rights Act 1964

The UK Equality Act 2010

The US Foreign Corrupt Practices Act 

The UK Bribery Act 2010

The International Labor Organization (ILO)

Is there an assessment?

No

Who is the course for?

Officers and Crew.

Is previous experience required?

No, but basic maritime engineering knowledge is recommended.

How will the course benefit me?

This course is designed to provide you an understanding of the operation and use of an exhaust gas cleaning system (Scrubbers).

How will the course benefit my company?

The course will provide the learners with basic knowledge about scrubbers and scrubber operations.

What standards are referenced in the course?

• MARPOL Annex VI

• OCIMF guide for Implementation of Sulphur Oxide Exhaust Gas Cleaning Systems

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course provides an introduction to the understanding of gas in high risk work situations.  It describes real dangers and explains about the most common types of gas.  The course provides increased understanding and knowledge of elements of risk when working in areas exposed to gas, and knowledge of how best to protect yourself, and others, using proper equipment. Users shall become acquainted with the possibilities and limitations presented by gas measurement equipment, in relevant situations.

Course Content

- Introduction

- Relevant terms

- Air and closed spaces

- Oxygen measurement

- Explosive gases

- Toxic gases

- Conclusion

Who is this course for?

All seafarers, shipboard or shore-based office personnel who require an introduction to ship stability. 

Is previous experience required?

No previous experience is required. 

How will this course benefit me?

By providing learners with a basic understanding of the principles of ship stability.

How will this course benefit my company?

By increasing company personnel’s awareness and understanding of ship stability and thus decreasing the chance of related incidents.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.

This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.

Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.