Course catalogue

Who is this course for?

All personnel who work in the oil & gas industry and are involved with oil and gas extraction.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand oil and gas extraction.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of oil and gas extraction.

What standards are referred to in this course?

• The American Petroleum Institute (API)

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of blinding, venting and pressure relief methods and associated safety measures.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to blinding, venting and pressure relief in oil and gas operations

How will this course benefit my company?

By ensuring you are introduced to blinding, venting and pressure relief in oil and gas operations

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course is designed for people who already know how to declare on paper and who want to learn how it is done electronically.

The course provides knowledge about preparation, planning, execution and documentation of assembling the bolted connections. The course is a combination of theory and practice and concludes with a theoretical test and a practical test with sensor.

The main objective is to provide the necessary expertise, both knowledge and skills to executive responsible person to dismantle, assemble and attract bolted connections in accordance with EN 1591-4 chapter 8.

The timetable covers the following tables in EN 1591-4: 2013: 1, 2, 3, 6, 7, 8 and 9.

Only in Norwegian

Hovedmålet med kurset er å skape gode holdninger, gi deltakerne god kjennskap til sikkerhetsrutiner og hindre at liv og helse går tapt.

Kurset går over tre dager og skal gi deltakerne grundig opplæring i gassmåling før entring av lukkede rom.

Kursinnhold
- Forskrifter og retningslinjer for arbeids- og entringstillatelser i lukkede rom
- Virkemåter og begrensninger for bærbare gassmålere/detektorer
- Hvilke typer sensorer måler brennbare gasser, oksygen og helsefarlige gasser
- Måling før entring og kontinuerlig overvåking av brennbare/helsefarlige gasser og oksygen i arbeidsatmosfæren med bærbare gassmålingsintrument
- Prosedyrer for gassmålingsintrument ved klargjøring, betjening, kalibrering og vedlikehold
- Brann- og eksplosjonsteori
- Tilltaks- og grenseverdier for eksponering
- Risikovurdering av arbeidsatmosfæren før entring
- Handlingsmønster ved uønskede hendelser og stans av arbeidet
- Ulike typer åndedrettsvern - fra filter til trykkluft
- Klargjøring, betjening/bruk og daglig vedlikehold av luftforsynt åndedrettsvern

Course Goal: This course aims to provide an awareness of Naturally Occurring Radioactive Material (NORM) and provide best practice for managing NORM in oil and gas producing facilities.

Who is the course for?

All personnel who may be exposed to NORM in the workplace

This course aims to provide an awareness of Naturally Occurring Radioactive Material (NORM) and provide best practice for managing NORM in oil and gas producing facilities.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives:

LO1 Define what is meant by NORM

LO2 Explain what is meant by ‘radioactive material’ and the difference between alpha particles, beta particles and gamma rays

LO3 Identify where NORM is found 

LO4 Describe the risks and hazards associated with NORM

LO5 Explain the purpose of radiation monitors 

LO6 Explain the importance of proper work planning

LO7 Identify control measures that can be used to minimise the risk posed by NORM

LO8 Describe the PPE that should be used when working with NORM

LO9 Explain how to limit decontamination and correctly dispose of NORM

After completing this course, participants will have the knowledge required to pass the IWCF Certification test. The IWCF Certification in Norway is a government imposed certificate for leading well service personnel and must be renewed every two years.

Course Content

- Self-study before the course starts

- Teaching and assignments

- Practical exercises on simulator

- The course ends with IWCF certification test

- Main reasons for well bore kick

- Interpretation of welll bore signals indicating a kick

- Shut-in procedures

- Well control calculations

- Circulations methods

- Simulator exercises

COURSE DESCRIPTION

We investigate to take lesson learned, implement preventive measures, and to prevent recurrence of adverse events. Investigating an adverse event is like peeling an onion. We start with the direct causes that are the most visible. To get to the bottom of the events, we must uncover "layer upon layer" to discover the causes behind. Technological development and new organizational structures lead to an increase in complexity, and it becomes more difficult to understand the connection between an incident and the underlying causes of an incident. This course presents method, organisation, and process for conducting investigations. The course can also be offered in combination with a classroom session.

COURSE CONTENTS 

• Description and classification of adverse events

• Organising an investigation

• Handling information and evidence

• The loss-causation model

• The MTO model

• The STEP model

• Reporting and follow-up

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY?

After completing the module, participants will understand what inquiry is and to the various stages of the investigation process. Participants will also learn about how the investigation is led and implemented in practice.

For more information and prices, please contact us:

https://trainingportal.com/

Email: learning@proactima.com

Phone: (+47) 4000 1933

Contact Proactima for a tailormade solution for your company.

The object of this course is to help course participants maintain and develop their knowledge, skills and attitudes regarding their role in an emergency response situation.

This course consists of a representative selection of the material from the Fire Team – Basic Course, adapted to participants’ previous knowledge, with major emphasis on practical training and drills.

This course is valid for 24 months.

E-learning course material to self-study the L&D9DI requirements to meet SQA for:

1. Preparing and planning assessments 

2. Assessing candidate’s performance and knowledge 

3. Confirming candidate progression and achievement 

4. Documenting each of the above according to the requirement of the management system in the workplace 

5. How to build a portfolio of evidence that meets the L&D9DI standard 

6. How to demonstrate knowledge of the above processes and a range of knowledge related to competence assessment in the workplace

What’s included in this course:

• SQA Registration Fee

• Online Induction

• Access to L&D9DI e-learning modules

• Full explanation of evidence requirements and access to templates and evidence guides and examples 

• Full access to Mintra ITB TrainingPortal

• Virtual classroom on request - Introduction to SQA running weekly 

• Comprehensive support from an ITB Assessor to completion

• Assessment and Internal Verification of your submitted evidence

• SQA Certification Successful delegates will receive a certificate from the Scottish Qualifications Authority (SQA)

Those who assess in the workplace using direct and indirect methods of assessment using examples: observation, questioning, work product, professional discussions, simulations, written evidence such as witness statements and candidate statements and RPL.

Assessment Requirements

Delegates will be required to submit a portfolio of evidence covering all of the Performance and Knowledge Criteria for the L&D9DI Unit. They must submit, as a minimum, assessment-related documentation that provides evidence for the elements listed below, for two candidates, covering two assessments per candidate: 

• Preparing to assess 

• Planning assessments 

• Assessing candidate’s performance and knowledge 

• Confirming progression and achievement

Delegates must use a range of assessment methods, including observation, questioning and work product. 

Delegates will also need to be observed carrying out part of the assessment process by their ITB assessor and participate, with other assessors in their workplace, in standardisation practice.

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course provider: Proactima

Who is this course for?

Personnel requiring awareness or understanding of glycol regeneration.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of the process of glycol regeneration

How will this course benefit my company?

By ensuring you have an overview of the process of glycol regeneration.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable.

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

Who is the course for?

All personnel who work in a role that may put them at risk of a hand or body injury.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an introduction on how to prevent hand and body injuries in the workplace.

How will the course benefit my company?

This course to ensure personnel have the knowledge of how to protect their hands and body from injury in the workplace, by following safety measures and understanding procedures.

What standards are referenced in the course?

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The object of this course is to help participants maintain and develop their knowledge, skills and attitudes regarding their operational / emergency response function.

Course Content

Portions of this course will include group discussion and exchange of experiences, led by a helicopter pilot in active offshore service or with experience from offshore flying:

- Experiences from helideck service

- Improvement potential

Participants should also be able to: 

- Learn from the experience and incidents of other helideck personnel.

- Transfer their own experience as heliguards/HLO to other helideck crews.

This course is valid for 24 months.

Who is this course for?

All personnel who work with or on board Floating Production Storage and Offloading units (FPSOs).

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of industry best practice for FPSO vessel operations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an overview of industry best practice for FPSO vessel operations.

What standards are referred to in this course?

• International Convention for the Safety of Life at Sea (SOLAS)

• Port State Authority/Flag State

• International Maritime Organization (IMO)

• International Association of Classification Societies (IACS)

• American Bureau of Shipping (ABS)

• China Classification Society (CCS)

• Det Norske Veritas (DNV)

• Germanischer Lloyd (GL)

• Korean Register of Shipping (KR)

• Lloyd’s Register (LR)

• Nippon Kaiji Kyokai (ClassNK) (NK)

• Registro Italiano Navale (RINA)

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Kurset er for utførende personell som har arbeid som kan påvirke sikkerheten for elektriske anlegg ved bruk av mulige tennkilder

Kurset er i hht EN IEC 60079-14, NEK 420, Petroleumsloven, ATEX- Direktivet.

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.

COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.

STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY?

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment.

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.

For more information and prices:

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

The NORSOK R-003 standard, Safe Use of Lifting Equipment is the industry standard for operating lifting equipment on the Norwegian continental shelf.

The course, “Safe Use of Offshore Cranes”, builds on NORSOK R-003 and is an important means for satisfying governmental regulations for maintaining and verifying competence in the safe use of lifting equipment.

The course focuses ongood work practices, as well as good attitudes and understanding of safety for crane operations, in accordance with the NORSOK R-003 standard.

This course gives an introduction to the new version of R-003 which was launched in 2017.

The course contains references to the 2004 version of R-003, but the course in its entirety will be updated when the new version of R-003 is launched with an updated Appendix B.

Course Content:

-Introduction

-Rolls and responsibilities

-Planning and supervising

-Communication

-Supply vessels

-Load bearers

-Chemicals

-Lifting to and from the rig floor

-Using guy wires

-Lifting drilling pipes and casings

-Assembly and disassembly lifts

-Lifting scaffolding material and planks

-Operating blind

-Personnel lifts

Hensikten med kurset er å gi blivende kranførere god teoretisk og praktisk grunnopplæring på fastmonterte hydrauliske kraner. Kurset gir elevene god innsikt i prinsippene for kranens konstruksjon og virkemåte. Etter endt kurs med bestått teoretisk prøve vil denne sammen med bestått praktisk kjøreprøve være grunnlaget for utstedelse av kranførerbevis G20 Fastmontert hydrauliske kraner.

Opplæringen dekker kompetansekrav i NORSOK standard R003N for Kranfører G20. 

Kursinnhold
- Innledning
- Konstruksjon
- Hydraulikk
- Mekanikk
- Lover / forskrifter / standarder
- Ståltau / vinsj / blokker
- Dokumentasjon
- Sikkerhetsbestemmelser
- Løfteredskap
- Øvingsoppgaver
- Eksamen

This course is only available in Norwegian.

Who is this course for?

Personnel requiring an awareness or understanding of asset stability.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with a basic understanding of the principles of asset stability.

This course consists of following sections:

Section One: ‘An Introduction to Asset Stability’

Section Two: ‘Understanding the Curve of Statical Stability (GZ Curve)’

Section Three: ‘Free Surface Effect’

Section Four: ‘Stability Criteria and Regulations’

Section Five: ‘Structural Strength’

How will this course benefit my company?

By ensuring you have a basic understanding of the principles of asset stability.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awarneess or understanding of hydraulic systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to introduce learners to the different types of hydraulic systems.

How will this course benefit my company?

To ensure a minimum company understanding of different types of hydraulic systems found in the Oil and Gas Industry.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

An important part of Hytorc Norway's overall concept is courses and training in working on flanges and bolted connections. We have been involved in the development of courses since OLF started its Gas Leakage Project in 2003 and up to today's requirements which are in accordance with NS-EN 1591-4.

The timetable covers the following tables in
NS EN 1591-4: 2013: 1, 2, 3, 6, 7 and 8.

Who is this course for?

Personnel requiring an awareness or understanding of the management of hydrocarbon releases.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of managing hydrocarbon releases

How will this course benefit my company?

By ensuring you have an overview of managing hydrocarbon releases

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
All well intervention personnel working with tools where explosives are an integrated part of the operation

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to give learners an introduction to explosives used in well intervention operations

How will this course benefit my company?
By ensuring you have an introduction to explosives used in well intervention operations

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Dette kurset tilfredsstiller krav i Norsok R-003 tillegg B.8 og B.9 vedlikehold og verifikasjon av kompetanse. Simulator trening bør gjennomføres minst hvert tredje år for kranoperatører G5 offshorekran, dekksoperatører kan delta for å øke risikoforståelse, holde seg oppdatert på regelverk.

Målsetningen med kurset er at kranoperatør skal tilegne seg tilstrekkelig kunnskap om sikker bruk av G5 offshorekraner til å håndtere last internt på innretning, til og fra fartøy mellom faste eller flytende innretninger og undervannsløft på en sikker måte. Risikoforståelse, riktig adferd, teknisk systemforståelse og krav i NORSOK R-003 er hovedfokus under gjennomføring.

Kursinnhold: 
- Kartlegging av kompetanse
- Kjennskap til ulykker innen kran- og løfteoperasjoner
- Lover, forskrifter, standarder og brukermanual
- NORSOK R-003 sikker bruk av løfteutstyr
- Løfteinnretningens tekniske oppbygning og virkemåte
- Løfteinnretningens sikkerhetssystemer
- Vedlikehold og sakkyndig kontroll
- Planlegging av løfteoperasjoner
- Simulatortrening: kritiske løfteoperasjoner, personalløft med MOB-båt/personalbasket og løft under marginale værforhold
- Simulatortrening: Bruk av sikkerhetssystemer, AOPS, MOPS, nødlåring og nødkjøring
- Simulatortrening: fokus på personlig faktor og reaksjonsmøter
- Evaluering etter hver øvelse i simulator
- Teoretisk eksamen

Påmelding
- Påmeldingsskjema skal fylles ut og returneres sammen med en PO eller akseptert betalingsmetode.
- PO eller akseptert betalingsmetode kan sendes til RA-NOR-AMAdminSupport@nov.com. 
- Ordrebekreftelse og Joining Instruction vil bli sendt så snart deltakeren har fått plass.

Kansellering
- Hvis kjøper kansellerer mindre enn tretti (30) dager før oppstartsdato, vil kjøper bli belastet 100% av beløpet for opplæringen.
- Selger forbeholder seg retten til å kansellere og / eller planlegge ny dato på kurs med lav påmelding opptil to (2) uker før startdato for kurset.

No show
Ved manglende oppmøte, forbeholder selger seg retten til å fakturere kjøper for "no show" 100 % av beløpet for opplæringen.

NATIONAL OILWELL VARCO, L.P. OG DETS AFFILIATER VILKÅR OG BETINGELSER gjelder for alle kurs. 

Who is this course for?

Personnel requiring awareness and understanding of Natural Gas & LNG and associated HSE considerations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to improve your knowledge of Natural Gas Liquid and LNG including transport and HSE considerations.

This course contains nine modules:

Module 1: An Overview of Gas Liquids

Module 2: Chemical and Physical Properties of Gas Liquids

Module 3: Liquefied Petroleum Gas

Module 4: Natural Gas Liquids (NGL) Recovery

Module 5: Removal of Natural Gas Impurities

Module 6: Liquefaction of Natural Gas

Module 7: Shore-Based Storage of Gas Liquids

Module 8: Transportation of Liquefied Natural Gas

Module 9: Health, Safety and Environmental (HSE) Issues of Gas Liquids

How will this course benefit my company?

To ensure you have an understanding of NLG, LNG, transportation and HSE considerations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice. 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of sealed sources of radiation in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of sealed radiation sources.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US operations involving sealed radiation sources.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course is in accordance with the Norwegian oil and gas training curricula - courses in valve technology.  The course is a combination of theory and practical application and concludes with a web-based exam, which takes about 2 hours to complete.

This training will help participants make their daily work with valves simpler and safer.
 
Course Content
- Operate different valve types optimally
- See the difference between the different types of valves
- See if valves are functioning properly
- Test valves
- Perform 1st line maintenance
- Ensure that valves are and remain atmospherically sealed
- Dismantle and install valves on the line

Hovedmål med kurset er å gi personer som skal utøve rollene som signalgiver, anhuker, dekksoperatør, boredekksarbeider, rigger og operatør av løfteinnretning opplæring i vurdering og forståelse av farer samt sikker bruk, vedlikehold, daglig kontroll og kasseringsregler for ulike typer løfteredskap. Anhuker og signalgiver skal samhandle og kommunisere med operatør av løfteinnretning i enhver løfteoperasjon på en slik måte at uønskede hendelser unngås.

Kursinnhold
- Innledning
- Lover, forskrifter og standarder
- Personlig verneutstyr og farlig gods
- Krav til signaldgiver og anhuker
- Planlegge, gjennomføre og evaluere
- Oppbevaring, bruk og kontroll av løfteredskaper
- Sikkerhet for personell
- Kritiske løfteoperasjoner
- Løftetabeller
- Praktisk bruk løfteredskaper
- Evaluering og avsluttende prøve

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser 

Modul 2.3 (16 timer) G11- Løfteredskap 

This course is only available in Norwegian.

Requirements for training related to scaffolding are regulated by law and regulations. This course is based on the requirements of Regulations concerning the Performance of Work, Chapter 17, which is about assembly, dismantling and alteration of scaffolding.

-2-5 meters: 7.5 hours theory and  7.5 hours practical training
-5-9 meters: 15 hours theory and 15 hours practical training
-Over 9 meters: 36 hours theory and 72 hours practical training

This course covers the requirements of theoretical training for scaffolding up to 9 meters, and corresponds to the requirements of the Regulations concerning the Performance of Work, Section 17-2 and 17-3, on theoretical training. There is an additional requirement of 15 hours practical training if 5-9 meters. 

Course content:
-What is scaffolding
-Scaffolding and safety
-Risk assessment
-Forces and counter forces
-Structure of a scaffold
-Wind forces
-How to prevent accidents
-Mobile scaffold towers
-Haki scaffolding systems

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis/

Du må ha gjennomført stillaskurs del 1 før dette kurset. 

Dette kurset er bygget på krav i Forskrift om utførelse av arbeid, kapittel 17, som omhandler montering, demontering og endring av stillas.
Forskriften krever opplæring for ulike stillashøyder:
-2-5 meter: 7,5 timer teori og 7,5 timer praksis
-5-9 meter: 15 timer teori og 15 timer praksis
-Over 9 meter: 36 timer teori og 72 timer praksis.

Dette kurset forutsetter at du har gjennomført stillaskurs del1. Til sammen dekker disse kursene kravene til teoretisk opplæring for stillas over til 9 meter, og tilsvarer kravene i Forskrift om utførelse av arbeid § 17-2 -17-4 om teoretisk opplæring.
I tillegg er det krav om 72 timer praktisk opplæring under tilsyn av kvalifisert person, ref Forskrift om utførelse av arbeid § 17-2 - 17-4.

Kursinnhold:
-Innledning
-Risiko ved arbeid i høyden
-Montering, endring og demontering
-Rør og kobling
-Vindkrefter, beregning for vindkrefter og forankring
-Sikkert arbeid i høyden, risikovurdering og fallsikring
-Diverse stillaskonstruksjoner
-Beregninger

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis/

The course covers the following topics:

- Which companies should have a Working Environment Committee (AMU)?
- How to organize the a Working Environment Committee (AMU)?
- What is a Working Environment Committee (AMU)?

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The object of this course is to provide participants with basic knowledge and skills regarding helicopter operations, for both normal and emergency operations on the helideck, including safety routines and accident prevention. Participants also receive training on the relevant fire, rescue and protective equipment found on the helideck.

Course Content

- Laws and regulations

- Weather reporting, communication and routines

- Helideck regulations and guidelines

- Dangerous cargo

- Aviation fuel

- The responsibilities and tasks of the helideck crew during emergencies and abnormal operations

- The responsibilities and tasks of the helideck crew during normal operations

- Human factors

- Types of helicopters

- Fire theory

- The different extinguishing agents and their use

- Practice in fire fighting at a safety centre/school

This course is valid for 24 months.

Who is this course for?

Personnel who require a basic understanding of the operation of diesel engines and the importance of maintaining good lubrication for their safe operation.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an overview of how diesel engines operate, their components and their use within the industry. It will also outline the importance of maintaining good lubrication for their safe operation.

How will this course benefit my company?

This course will provide personnel with an overview of how diesel engines operate and the importance of maintaining good lubrication for their safe operation.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The object of this course is to help course participants maintain and develop their knowledge, skills and attitudes regarding their role in an emergency response situation.

Presentation

This training course provides a general introduction to the corrosion process, the protective coating used to prevent corrosion, the coating process and coating inspection.

Objectives

On completion of the training, students will be able to:

Know the different types of corrosion and their causes.

Understand the corrosion phenomenon and the threat it represents to the structural integrity.

Know the protective coating systems used in shipbuilding.

Be familiar with the constituents, structure and curing prerequisites of the protective coating systems.

Understand the different phases of the coating process and the requirements for successful coating application.

Be familiar with coating inspection procedures and the requirements of the IMO PSPC.

Recognise the different forms of coating failure.

Program

Module 1 - Introduction to Corrosion and Protective Coatings

Corrosion definition

Causes of corrosion

Different forms of corrosion

Corrosion rate

Protective coating systems

Paint coating components

Types of coatings

Technical data sheets

Coating cure

Module 2 - Coating Process and Inspection

Coating process scheme

Surface preparation

Cleaning techniques

Surface preparation

Paint application

Coating durability requirements

Coating inspection

Coating system documentation

Coating inspector qualifications

Inspection procedures and plan

Coating defects

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Corrosion and Coating awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Corrosion and Coating, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Presentation

This training course is about what an effective cyber security risk management should be. Its goal is not to address too many technical questions as the best technical expertise in the world won’t guarantee zero cyber risk. The course aims at providing your Company with a real battle plan: know the assets, know the enemies, organize accordingly and train the effectives. Although this will not be enough to avoid a cyber incident, the severity of the consequences of a cyber incident will depend on the company’s preparedness and ability to manage it.

Who the course is for?

The course ISM Code and Cyber Risk Management is aimed at anyone interested in understanding how an effective cyber security risk management should be. This may include Top Management of Shipping Companies, Ship Managers, Technical Superintendents, Ship Masters, Officers and Seafarers; Offshore Units Operators and Technical Staff, Shipyards Technical Staff; Surveyors; P&I and/or Insurance Inspectors; etc.

Objectives

On completion of the training, students will be able to:

Know what cyber security is, the main threats and their consequences.

Understand how to consider the cyber risks in the Safety Management System and how the ISM Code translated into cyber security.

Know the 12 cybersecurity commandments that will help implementing an efficient cyber risk management system.

Who is this course for:
Anyone wanting to take the SRC/VHR-exam.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
To use VHF you must have a VHF / SRC certificate. With this course you will learn the whole curriculum in a simple and easily understandable way.

How will this course benefit my company?
By ensuring you have the competence to use VHF.

What standards are referred to in this course?
Lovdata - www.lovdata.no
Petroleum Safety Authority - www.psa.no

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course aims to give personnel the knowledge required to understand the hazards and controls associated with noise in the workplace.

Course Content

LO1 Describe what noise-induced hearing loss is, and identify the early warning signs and symptoms to look out for

LO2 Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage

LO3 Explain the responsibilities and duties of employers and employees under current legislation

LO4 Explain how noise is measured and identify the noise levels above which employers should take action to reduce exposure

LO5 Explain the risk assessment requirements

LO6 Identify the control measures that should be taken to reduce exposure to noise

LO7 Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection

LO8 Explain the importance of healthsurveillance

The course for you that must issue a work certificate according to the Norwegian Labor Authority’s regulations nr 1357 “Regulations for execution of work», and is to be registered as a Gas tester offshore or in ship yard, chemical or petro-chemical plants.

Content:

HES – datasheets and physical/chemical terms.Fire and explosion theory with practical demonstrations.Measuring principle, function and limitations for: sensors for flammable gas, oxygen and hazardous substances.Regulations and guidelines.Operation and use of gas measuring instruments.Quality control of equipment and personnel.LRA (low radioactive deposition)Measuring methods benzene.Dangers of static electricityZone classificationGas freeing and cleaning methodsDangers of H2S and benzene exposurePreparations for safe entry and correct use of protective equipment.Work permits and safe job analysis (WP/SJA)Group tasks: Develop plan for nitrogen purging, valve and blinding plan according to procedure for preparations before and after maintenance. Gas freeing: Practical group task in our mobile course container (miniature process facility).Practical and written exam

Who is this course for?

This course is aimed at all personnel involved in operations involving the use of seals, particularly those who are expected to undertake related duties in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of the role and application of seals and gaskets.

How will this course benefit my company?

To ensure you have an overview of the role and application of seals and gaskets.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of subsea control systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of subsea control systems and has the following sections:

Section 1: Evolution of Subsea Technology

Section 2: Subsea Completions Layout

Section 3: Subsea Control Systems

Section 4: Subsea Process Control

Section 5: Subsea Technology Development

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to Subsea Control Systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course includes all subjects needed to prepare candidates for the rotary drilling well control exam, surface and subsea BOP stack on driller level (Level 3).

A printed course manual and exercise book is provided for all attendees. The IWCF exam is included in the course.

The course has been made on basis of the recommendations for enhancements to well control training, issued by the International Association of Oil & Gas Producers (OGP).

Course Content
- Kick prevention
- Shut in procedures
- Well control methods
- Kill sheet calculations
- Practical simulator training
- Circulation methods
- Practical simulator assessment
- IWCF written exam on the last day (Friday)

Please note! The course is in Norwegian, however you have the option to select the exam language to be English

The object of this course is to help participants maintain and develop their knowledge, skills and attitudes regarding their operational / emergency response function.

A representative selection of the content of the Small MOB Boat Basic Course adapted to participants’ previous knowledge, with major emphasis on practical training and drills.

This course is valid for 24 months.

Who is this course for?

Personnel requiring an awareness or understanding of (Material) Safety Data Sheets ((M)SDS) for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the structure and information contained in Safety Data Sheets.

How will this course benefit my company?

By ensuring you have an overview of Safety Data Sheets and how your role may require to understand certain information contained in the sheets.

What standards are referred to in this course?

Chemicals (Hazard Information and Packaging for Supply) Regulations 2009

CLP Regulation

REACH Regulation

Control of Substances Hazardous to Health (CoSHH) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

The course covers the following topics:

- Agreement on Inclusive Working Conditions
- Working environment and prevention
- Absence

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is this course for?
Process Operators and Lab Technicians

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an overview of the various types of process chemicals, their use and how they work.

Section 1: Basic Introduction to Chemistry
Section 2: Process Chemicals in the Oil and Gas Industry
Section 3: Identifying the Risks in the Use of Process Chemicals
Section 4: Managing Chemical usage

How will this course benefit my company?
By ensuring you have an overview of the various types of process chemicals, their use and how they work.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.