Course catalogue

Who is this course for?

This eLearning course is aimed at individuals required to work using display screen equipment, such as a computer, laptop or tablet.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will give you a basic understanding of the key health risks associated with display screen equipment and what you can do to mitigate them.

How will this course benefit my company?

By ensuring you are fully aware of how to avoid injury while working at your computer, you can help reduce the number of lost workdays and hours due to health issues.

What standards are referred to in this course?

Health and Safety (Display Screen Equipment) Regulations

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course goal: This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

Learning Objectives

LO1 Identify the main environmental issues that affect the Oil and Gas industry

LO2 Explain the importance of being an environmentally responsible company

LO3 Explain the company’s commitment to managing environmental issues

LO4 Explain the role of ISO 14001 in environmental management

LO5 Explain the role of the Regulator

LO6 Define what is meant by environmental ‘aspects’ and ‘impacts’

LO7 Identify the activities that can contribute towards atmospheric pollution 

LO8 Identify the activities that can contribute towards water pollution

LO9 Identify typical spill sources

LO10 Describe the environmental effects of chemical discharges

LO11 Identify the sources and impacts of disturbance of the seabed by the Oil and Gas Industry 

LO12 Identify the sources and impacts of noise from oil and gas operations 

LO13 Identify the activities that can generate waste

LO14 Describe ways in which the impact on the environment can be minimised

LO15 Explain that everyone has a role to play in protecting the environment

Who is this course for?

Personnel requiring an awareness or understanding of common RPE and what they are used for.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give personnel an introduction to different types of respiratory protection and describe its use in the workplace.

How will this course benefit my company?

By ensuring you have had an introduction to different types of respiratory protection and describe its use in the workplace.

What standards are referred to in this course?

Health and Safety at Work etc. Act 1974

Management of Health and Safteey at Work Regulations 1999

Control of Substances Hazardous to Health Regulations (COSHH) 2002

Control of Asbestos Regualtions 2012

Control of Lead at Work Regulations 2002

Ionising Radiations Regulations 1999

Confined Space Regulations 1997

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for:

The target group for this Basic Understanding of the Regulations Training course is all employees within the Norwegian oil industry covered by the Norwegian Offshore Industry Authority’s area of responsibility.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

The course content is designed to satisfy the requirement concerning competence in relation to the regulations by providing knowledge of the HSE regulations structure and content and giving examples of practical use. When working through the course, it is a good idea to remain online so you can make active use of the regulations. That way you will benefit most from the course.

How will this course benefit my company?

By ensuring you have the knowledge of competence in relation to the regulations by providing knowledge of the HSE regulations structure and content.

What standards are referred to in this course?

www.havtil.no

Is there an assessment?

Yes

Who is this course for?

Personnel requiring an awareness or understanding of US CLP and GHS applications.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of GHS and CLP.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US GHS and CLP.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel who may be exposed to nitrogen in the workplace.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to provide learners with an awareness of nitrogen and provide best practice for work involving nitrogen in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel understand the best practice when working with nitrogen in oil and gas producing facilities.

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations 

Health and Safety Executive (Health and Safety Executive (HSE)

The Occupational Safety and Health Administration (OSHA)

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

All personnel who work in the Oil & Gas industry in roles that are involved in oily discharges to sea.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

To provide learners with an awareness of the potential environmental impacts associated with oily discharges to sea, as well as the legislation and control measures that are in place to minimise these impacts.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel are aware of ways to safely remove oily discharges which will help to take care of the environment.

What standards are referred to in this course?

• Offshore Petroleum Activities (Oil Pollution Prevention and Control) OPPC Regulations 2005

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide you with an awareness of bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs.

How will this course benefit my company?
By ensuring you are aware of the bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel at all levels within an organisation to establish a common benchmark of awareness.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides an overview of common corporate sustainability approaches and identifies the social, environmental and corporate governance aspects that should be considered during business operations. The course also identifies the human rights that are at risk of infringement in the work environment, and you will be aware of the global presence of modern-day slavery. During the course, you will be asked to make your own decisions in relevant dilemmas involving environmental criminality, corruption and breaches of labour rights.

How will this course benefit my company?

By ensuring you are aware of the common corporate sustainability approaches and identifies the social, environmental and corporate governance aspects that should be considered during business operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This Working in Cold Environments course is for personnel who require an introduction to or awareness of working in cold climates.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

Working in cold environments can be a significant challenge for comfort and the ability to perform work tasks in a safe and efficient manner. 

How will this course benefit my company?

By ensuring you have are aware of the challenges to perform work tasks in cold environments. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness and understanding of common practices and legislation for chemical use and discharges.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

To provide learners with an awareness of the environmental impacts associated with the use and discharge of chemicals in the Oil and Gas Industry and the legislation and control measures that are in place to minimise the impact on the environment.

How will this course benefit my company?

By ensuring you are aware of the environmental  impacts associated with the use and discharge of chemicals in the Oil and Gas Industry and the legislation and control measures that are in place to minimise the impact on the environment.

What standards are referred to in this course?

Offshore Chemical Regulations 2002

Offshore Chemicals (Amendment) Regulations 2011

Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for:
All employees working in ISPS-areas.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Basic knowledge of ISPS rules and regulations applicable to international ports and harbours. The course objective is to raise awareness of possible threats to international ports and harbours. Completed course normally gives access to ISPS-areas on harbours.

How will this course benefit my company?
By ensuring you have the knowledge related to ISPS rules and regulatins applicable to international ports and harbours.

What standards are referred to in this course?
ISPS code

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel within the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

How will this course benefit my company?

The course will benefit companies by reducing PPE related incidents and injuries. 

What standards are referred to in this course?

Control of Lead at Work Regulations 

Ionising Radiations Regulations 

Control of Asbestos at Work Regulations 

Control of Substances Hazardous to Health Regulations 

Control of Noise at Work Regulations

Personal Protective Equipment at Work Regulations

Is there an assessment?

Yes.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH). 

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

Ship Officers

Is previous experience required?

Documented 12 months seaservice as an officer onboard an ISPS vessel. 

How will this course benefit me?

After successfully completing this course, you should be able to undertake the duties and responsibilities of a Ship Security Officer, as defined in section A/12.2 of the ISPS Code and in section A-VI/5 of the STCW Code. The course enables you to maintain and supervise the implementation of the Ship Security Plan, evaluate the security risk, threat and vulnerability, make regular inspections to ensure that appropriate safeguards are implemented and maintained, and ensure that the security systems are operated, tested and calibrated correctly.

How will this course benefit my company?

By ensuring you are qualified and certified as a Ship Security Officer (SSO).

What standards are referred to in this course?

STCW A-VI/5 and ISPS code section A/12.2.

The course is approved by the Norwegian maritime Authority. Approved certificate as Ship Security Officer will be issued upon course completion.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%. 

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

To complete the course, it is required that you are employed by a company which has a plan for onboard training with these kind of activities.

The course will not be approved for any persons without a connection to a company as described above.

Who is the course for?

All personnel who work with machinery, tools and appliances.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to provide learners with an awareness of the requirements of the Provision and Use of Work Equipment Regulations (PUWER) and how they apply in the workplace.

How will the course benefit my company?

This course will benefit companies’ by providing personnel with an awareness of PUWER. 

What standards are referenced in the course?

Provision and Use of Work Equipment Regulations (PUWER)

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

Is there an assessment?

Yes

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?
All personnel who are at risk for being exposed to benzene.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide learners with an awareness of benzene and provide best practice for work with benzene in oil and gas producing facilities.

How will this course benefit my company?
By ensuring you are aware of the impacts of benzene and familiar with best practice for work with benzene.

What standards are referred to in this course?
Norwegian Oil&Gas circulars NOG 130, 131&133
SOLAS - II/2/16.3.2
IMO circulars 1095 and 1220

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This HSE Introduction course is for all personnel who require an introduction to or awareness of HSE roles, responsibilities and duties in Norway.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Health, safety and environment (HSE) considerations are vital to every organisation. Moreover, HSE requirements in the workplace are laid down in a range of laws, regulations and guidelines.

The employer has the primary responsibility for providing a suitable, safe working environment – and for ensuring sufficient training. This course aims to provide you with the baseline knowledge to be able to manage HSE challenges in your daily work.

How will this course benefit my company?

By ensuring you have sufficient knowledge of relevant HSE requirements, laws, regulations, guidelines and best practice.

What standards are referred to in this course?

NA

Is there an assessment?

Yes

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

How will this course benefit my company?
By ensuring you have a basic understanding of the drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Everyone working on low voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low voltage installations.

What standards are referred to in this course?

§ 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE".

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
The United Kingdom’s UK’s Health and Safety Executive’s Regulation 253 ‘The safe isolation of plant and equipment’.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Any personnel who require knowledge of Legionella bacteria.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

By providing personnel with an overview of the steps that can be taken to reduce the risks posed by Legionella in the workplace.

How will this course benefit my company?

By providing personnel with an overview of how to identify the risks associated with Legionella and the control measures that can be implemented to reduce those risks.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

Personnel working in industries which release pollutants into the air as a result of their operations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing you with an awareness of the environmental issues associated with atmospheric emissions and how these impacts can be minimised.

How will the course benefit my company?

Personnel who are aware of the impacts of environmental emissions and how they can be controlled can help to ensure compliance with regulations and reduce harm to the environment.

What standards are referenced in the course?

Climate Change Act

The International Convention for the Prevention of Pollution from Ships (MARPOL) Annex VI

Merchant Shipping (Prevention of Air Pollution from Ships) Regulations

Offshore Combustion Installations (Pollution Prevention and Control) Regulations (PPC Regulations)

Petroleum Act

Greenhouse Gas Emissions Trading Scheme

Ozone-depleting Substances Regulations

Fluorinated Greenhouse Gases Regulations

Energy Savings Opportunity Scheme (ESOS) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Key employees (IT and HR staff, board members)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course is designed to raise the awareness how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

The course gives an overview of definitions, roles and responsibilities, the rights of individuals and the obligations of businesses with respect to the regulation.

We examine the territorial scope and outline the general requirements, technical solutions and administrative routines required for GDPR compliance, whilst also examining how to handle the issues sourrounding a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

How will this course benefit my company?
By ensuring you have the awareness of how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

What standards are referred to in this course?
EU's General Data Protection Regulation - GDPR (2018)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course covers the following topics:

- What is psychosocial working environment?
- Characteristics of good and poor psychosocial environment
- Roles and responsibilities
- Prevention

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Price for a company member of Norsk olje og gass: NOK 75,-

Who is this course for:
This course is designed for electrical personnel in various industries, including electricians, maintenance workers, facility managers, engineers, and safety professionals, to ensure they can work safely around electrical systems and equipment.

Is previous experience required?
This course is for qualified or instructed personnel.

How will this course benefit me?
By ensuring that the learner is equipped to identify and avoid electrical hazards, reducing the risk of electrical accidents and injuries.

How will this course benefit my company?
A reduction in workplace accidents related to electrical hazards that can lead to injuries, medical expenses, and potential legal liabilities.

What standards are referred to in this course?
FSE Regulations

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

Learning Objectives

- LO1 Explain what is meant by a Confined Space
- LO2 Give examples of Confined Spaces
- LO3 Describe the dangers that can be caused by confined space entry work
- LO4 Identify the legal requirements associated with confined space entry work
- LO5 Explain how to avoid entering confined spaces
- LO6 Explain the importance of having a Safe System of Work in place
- LO7 Describe individual roles and responsibilities involved in Confined Space Entry work
- LO8 Explain the requirements for gas testing
- LO9 Identify acceptable levels for atmospheric test results
- LO10 Give examples of Confined Space Entry site safety equipment
- LO11 Explain the actions to take in an emergency situation
- LO12 Explain Confined Space Entry alarm procedures

This course focuses on prevention of Dropped Objects and employs Samarbeid for Sikkerhet latest revision of the handbook, recommendation 024 (revision 4. 2018) as normative. 

Through increased understanding of the term Dropped Objects, the use of practical tools, aids and methods, the intention is for course participants to be more observant about dropped objects in their daily work. 

This revision was released on the 24.02.20. 

Course content: 

- Dropped Objects tools
- Dropped Objects categories
- Observation techniques 
- Barriers 
- How to improve Dropped Objects findings

Contact details: 

Please contact AAK Energy for more information: 


E-mail:post.aak@nog.no            
Contact person: Inge Køhl

Obligatory working environment training for safety deputies and union officials, completed as e-learning combined with classroom training. 

The course provides basic working environment training in accordance with the main contract between The Norwegian Confederation of Trade Unions (LO) and The Confederation of Norwegian Enterprise (NHO).

Course Content

E-learning

Interactive exercise sequences, video clips, and animations are used to illustrate the topics.

The course provides insight into why HSE work is important, using The Working Environment Act as a tool.

Knowledge of roles and responsibilities in relation to the working environment.

Using systematic methods for improving the working environment and for solving working environment issues.

Classroom Training

This internal company gathering can be conducted and organised by the company itself, or in collaboration with Mintra/The Federation of Norwegian Industries. If you would like Mintra/The Federation of Norwegian Industries to conduct the training, a minimum of 10 people must be enrolled.

If your company would prefer to conduct the training, relating content to internal routines and conditions, Mintra will contribute with documentation and information that describe activities related to this training. 

Contact us to find a suitable implementation model!

Who is this course for?

Personnel responsible for cooking, preparing or handing food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will this course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel throughout an organisation which operates within major accident hazard sectors.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to major accident hazards.

How will this course benefit my company?

By ensuring you have had an introduction to major accident hazards.

What standards are referred to in this course?

The Offshore Installations (Safety Case) Regulations

The Offshore Installation and Pipeline Works (Management and Administration) Regulations (MAR)

The Offshore Installations (Prevention of Fire andf Explosion and Emergency Response) Regulations (PFEER)

The Offshore Installations and Wells (Design and Contruction) Regulations (DCR)

The Control of Major Accident Hazards Regulations (COMAH)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for:
Maritime personnel, onshore and offshore.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
The course looks at the purpose of the ISM Code, which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will this course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM Code.

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code 

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

The International Safety Management (ISM) Code 

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Supervisors and employees who require an overview of Behavioural Observation Safety Systems.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to behavioural observation safety systems.

How will this course benefit my company?

Behavioural observation safety systems aim to improve workplace safety by focussing on what personnel do, and why they do it, and then applying strategies that promote safe behaviours in the future.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Este curso está diseñado para permitirle:

• Definir qué se entiende por "caída de objetos".

• Identificar cuáles son las causas comunes de la caída de objetos y sus consecuencias y explicar la importancia de eliminar o reducir el riesgo de que ocurran incidents.

• Identificar las obligaciones de los empleadores y los empleados para eliminar los incidentes de caída de objetos.

• Identificar las áreas que presentan un alto potencial de lesiones al personal en caso de ocurrir un incidente de caída de objetos.

• Identificar ejemplos de malas prácticas.

• Describir las medidas que se deben adoptar para controlar el riesgo de caída de objetos

Who is the course for?

All personnel working within the Oil and Gas Industry (onshore and offshore).

Is previous experience required?

You do not require previous experience to complete this course.

How will the course benefit me?

This course will provide you a basic understanding the ways in which industrial operations can impact the environment and the steps that we can all take to minimise these impacts.

How will the course benefit my company?

Environmentally aware personnel can help to reduce the environmental impacts of your operations and improve environmental performance.

What standards are referenced in the course?

ISO 14001 Environmental Management Systems

Offshore Chemical Regulations

Integrated Pollution Prevention and Control (IPPC) Directive

Control of Major Accident Hazards (COMAH) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The Working Environment Act, section 3-5, obligates employers and executives to complete HSE training. This course satisfies the requirements for HSE training for executives and managers.

The course contains the following modules: 

• A working life changing

• The Working Environment Act

• Risk Managament

• Healthy enough to work?

• Systematic HSE work

Who is the course for?

Personnel who are involved in the preparation of dangerous goods for transportation by sea.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course aims to provide learners with industry best practice in relation to the transportation of dangerous goods by sea.

This course has been developed in accordance with the general awareness/familiarisation training requirements described in the IMDG Code (Chapter 1.3).

How will the course benefit my company?

By ensuring you are familiar with industry best practice in relation to the transportation of dangerous goods by sea.

What standards are referenced in the course?

• International Convention for the Safety of Life at Sea (SOLAS)

• International Maritime Dangerous Goods (IMDG) Code

• Title 49 of the Code of Federal Regulations (49 CFR)

• International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

• IMO Model Course 1.10 ‘Dangerous, Hazardous and Harmful Cargoes’

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 70%.

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.

What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide an introduction to corrosion in the Oil and Gas Industry

Target Audience: All relevant personnel

Learning Objectives

LO1 Define what is meant by corrosion and explain why it poses a risk to the Oil and Gas Industry

LO2 Identify areas where corrosion is commonly found in oil and gas facilities

LO3 Identify the elements which are necessary for corrosion to occur

LO4 Identify the main corrodents found in oil and gas facilities and explain how these can cause corrosion

LO5 Identify different types of corrosion

LO6 Explain how corrosion can impact wells and flowlines

LO7 Explain how corrosion can impact plant and pipelines

LO8 Explain how corrosion can impact gas systems

LO9 Explain how corrosion can impact water systems

LO10 Explain how corrosion can impact deadleg areas

LO11 Identify areas where external corrosion is most prevalent

LO12 Describe corrosion control measures

LO13 Explain how to play your part in minimising corrosion

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.

This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.

Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with a broad overview of common Electrical Safety Rules, and outlines best practice when working with electricity.

How will this course benefit my company?

By ensuring you have the knowledge of common Electrical Safety Rules, and the best practice when working with electricity, to reduce risk and injury at work.

What standards are referred to in this course?

• Health and Safety at Work Act

• Electricity at Work Regulations

• Management of Health and Safety at Work Regulations

• Electricity at Work Safe Working Practices

• Offshore Electricity and Noise Regulations

• Provision and Use of Work Equipment Regulations

• BS 7671: 2018 Requirements for Electrical Installations

• Offshore Installations (Safety Case) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

Learning Objectives

LO1 Define what is meant by Personal Protective Equipment (PPE)

LO2 Identify the different types of PPE 

LO3 Identify typical regulatory requirements associated with PPE

LO4 Describe the Hierarchy of Control measures and the use of PPE in relation to this

LO5 Explain the requirement for assessing the suitability and compatibility of PPE

LO6 Explain the maintenance requirements for PPE

LO7 Describe the duties and responsibilities of employees in relation to PPE

LO8 Explain the importance of PPE-related training, information and instruction

Who is this course for?

This eLearning course is aimed at individuals who are required to work with wells in the oil and gas industry.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide learners with an overview of well integrity and its importance in maintaining safe and secure operations.

This course contains the following sections:

Section 1: Well Integrity Overview

Section 2: Well Categorisation and Well Barriers

Section 3: Well Design and the Cementing Process

Section 4: Human Factors in Well Integrity

How will this course benefit my company?

To ensure you have an overview of well integrity and its importance in maintaining safe and secure operations.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness and understanding of risk management.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course is designed to enable all personnel to have a common and consistent approach to industry best practice in relation to risk management.

How will this course benefit my company?

By ensuring you have a common and consistent approach to industry best practice in relation to risk management.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
This course is aimed at personnel from all sectors of the Oil and Gas Industry – government agencies, authorities, operators, contractors and service companies. It is especially valuable for newcomers to the industry and non-technical personnel working in areas like HR, finance, IT, contracts and administration who feel they could benefit from gaining a wider appreciation of the ‘bigger picture’.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an introduction to each key phase of the exploration and production industry.

How will this course benefit my company?
By ensuring you are aware of each key phase of the exploration and production industry.

What standards are referred to in this course?
OSPAR Convention

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace. 

Learning Objectives

LO1  Explain the principles of, and steps involved in, the Risk Assessment process

LO2  Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes 

LO3  Identify a typical Risk Assessment form    

LO4  Explain the requirements of the Risk Assessment team 

LO5  Recognise and explain Risk Assessment terminology

LO6  Identify the different steps within the Risk Assessment process 

LO7  Identify common, industry-specific hazards

LO8  Determine the appropriate level of Risk Assessment that may be required

LO9  Explain how to use a Risk Matrix to evaluate the level of risk

LO10  Explain how to identify appropriate control measures based on the Hierarchy of Control

LO11  Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’

LO12  Describe what to do if any Residual Risk remains too high

LO13  Explain how to carry out a Personal Risk Assessment and recognise its importance before each task 

LO14  Explain the importance of Dynamic Risk Assessment  

LO15  Identify situations where ‘Stopping the Job’ may apply

LO16  Explain the importance of communicating the outcomes of a Risk Assessment  

LO17  Understand the importance of communicating ‘Lessons Learned’

Who is this course for?

Personnel who work with pressurised cylinders, compressed gas or associated equipment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the use of pressurised cylinders, the risks involved and storage requirements.

How will this course benefit my company?

By ensuring you have an overview of the use of pressurised cylinders, the risks involved and storage requirements.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?
Trainee Oil and Gas Operations Technicians / Deck Crew

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an introduction to the use of storage tanks

How will this course benefit my company?
By ensuring you are introducted to the use of storage tanks

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.