Course catalogue

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with an overview of the safety precautions to be taken when working on electrical equipment

How will this course benefit my company?

By ensuring you have an overview of the safety precautions to be taken when working on electrical equipment

What standards are referred to in this course?

Health and Safety at Work Act (1974)

Electricity at Work Regulations (1989)

Management of Health and Safety at Work Regulations (1999)

Electricity at Work Safe Working Practices (2003)

Offshore Electricity and Noise Regulations (1997) 

Provision and Use of Work Equipment Regulations (1998)

BS 7671: 2008 Requirements for Electrical Installations

Offshore Installations (Safety Case) Regulations 2005 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%

Who is this course for?

Personnel requiring an awareness or understanding of US scaffolding safety.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of scaffolding safety.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US scaffolding safety.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel involved in forklift activities.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the hazards specific to forklift activities. 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to forklift activities. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims toprovide learners with an overview of industry best practice associated with pressure vessel inspection

Learning Objectives:

LO1 Define what is meant by a ‘pressure vessel’

LO2 Give examples of pressure vessels

LO3 Identify the factors that can cause pressure vessel incidents

LO4 Identify the hazards posed by pressure vessel failure

LO5 Explain the requirements for inspections to be carried out by a competent person

LO6 Explain the requirements for a written scheme of examination

LO7 Describe how to carry out internal and external pressure vessel inspection

LO8 Describe how to carry out pressure pipework inspection

LO9 Explain the importance of carrying out regular pressure testing

LO10 Describe the control measures that are required to limit the risk posed by pressure vessels

The object of this course is to motivate participants to actively contribute to a better and safer working environment. The course emphasises preventative measures that can prevent harm to people, the environment and equipment.

Course Content

After completing the course the students should have acquired basic knowledge of and proficiency in:

- HSE culture

- Prevention of work accidents

- Use of relevant fire fighting and rescue equipment

- Lifesaving first aid

- Collective evacuation aids

- Correct use of rescue suits with breathing apparatus

- Helicopter evacuation (HUET)

The course aims to create positive attitudes to the term HSE culture and an understanding of the importance of the social and physical working environment to life, health and values, both at work and during leisure time.

The course is valid for 48 months.

Hensikten med kurset er å repeter grunnleggende kunnskaper og ferdighet, til utførende ansvarlig person som skal demontere, montere og for spenne bolter i henhold til NS EN 1591-4 kapittel 8

Praktisk informasjon:
Re sertifiseringen er basert på 1 dag og består av klasseromsundervisning og praktiske oppgaver
Kurset avsluttes med en teoretisk og praktisk eksamen med sensor.
Etter man har bestått teoretisk og praktisk eksamen er man sertifisert for nye 5 år men følgende punkter må i varetas for at det skal vare ut 5 års perioden:
- Sertifisert personell skal ikke ha hatt avbrudd i arbeid med bolte arbeid for en periode på over seks måneder.
- Ved utførelse av arbeid på boltede forbindelser, skal det ikke foreligge noen grunn til å stille spørsmål om den faglige kompetansen til sertifisert personell.

Hvis disse vilkårene ikke oppfylles, skal sertifiseringen trekkes tilbake.
 
Kursinnhold:
Kurset tar for seg følgende tabeller i EN1591-4:2013:
1, 2, 3, 6, 7, 8 og 9.

Course Goal: 

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

Learning Objectives:

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Who is this course for?

Personnel requiring an awareness or understanding of common handling and storage methods for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the requirements for the handling and storage of hazardous substances

How will this course benefit my company?

By ensuring you have an overview of the requirements for the handling and storage of hazardous substances

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

The course is only available in Norwegian

Kurset gir kjennskap til forskrifter, regelverk og retningslinjer for arbeids- og entringstillatelser i områder med brann- og helsefarlige produkt. I tillegg gis kjennskap til virkemåter og begrensninger for sensorer som måler brennbare gasser, oksygen og helsefarlige gasser, samt kunnskap om metoder for gassfriing og rengjøring av anlegg.

Rettet mot alle som arbeider i prosesser/områder hvor det kan oppstå eksplosjonsfarlige atmosfærer. 

Etter kurset skal deltakerne:

- kjenne forskrifter, regelverk og retningslinjer for arbeids- og entringstillatelser i områder med brann- og helsefarlige produkt

- virkemåter og begrensninger for sensorer som måler brennbare gasser, oksygen og helsefarlige gasser

- kunne metoder for gassfriing og rengjøring av anlegg

FSE first aid is a practical course, with a high number of skill training stations. FSE first aid module will Increase knowledge of life-saving first aid.

The course covers the followong subjects: The first assessment, burns and electrical burns, recovery position, the unconsciousness patient, CPR skill training.

Coaching is a process that can be customized to meet the needs of the trainee. This process seeks to raise the workforce awareness toward their current style of work and behavior. It helps them strengthen their uniqueness optimally. It provides with different tools and strategies that help them achieve their individual goals faster. Coaching is the process that guides an individual to maximize the productivity seamlessly so as to achieve more in less. This helps them reach their personal and professional goals at the earliest.

• Recall the ""What, Why, Where, and How"" of an effective coaching 

• Describe the three-step approach to better coaching

Who is this course for?
All personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with a guide on the preventative and protective measures that may be put in place at workplaces following personnel return

How will this course benefit my company?
By ensuring you have an overview of the preventative and protective measures that may be put in place at workplaces following personnel return

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general

• Use of work equipment

• Selection of work equipment

• Training in the use of work equipment

• Workspaces and personnel requirements

• Risk assessment

• Safety, accidents and liability

• Direct and underlying causes of accidents

• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

As it’s important for leaders to give constructive feedback, in order to help their employees grow, develop their skills, confidence etc.. which results in organizational growth. Similarly, It’s important for an individual to ask for feedback instead of waiting to receive it. Start thinking of feedback as the fuel for your professional growth. In fact, set a goal to solicit feedback regularly instead of waiting for it to come to you. When you begin to see the value in regular feedback, your manager will find it easier to deliver, and—using these strategies—you’ll find it easier to receive, assess, and apply. Let’s take a look at how you can ensure that your future performance conversations are positive and productive.

• Examine the necessity to change your perspective towards feedback

• Identify the behaviors of receiving feedback

• Assess the ways of responding to feedback

All teams need coaches. That’s how they get better. Your role as the leader of a high-performing team is to provide the training, resources, coaching, and support they need—as individuals and as a team—so that they can grow in their abilities, and perform as efficiently and dynamically as possible. Because of today’s constantly evolving business environment, every individual, regardless of position or experience, needs ongoing training and coaching. Knowing which tools, training opportunities, and coaching methods work for each individual is critical. Research by Accenture found that 31% of employees left their jobs because they don’t like their boss; another 31% cited lack of empowerment as their reason for leaving. This lesson will help you build robust coaching connections and a toolkit that will help you develop your team’s skills, coach them to personal and professional success, and build a culture of growth and continuous improvement.

• Define the training needs for your team  

• Provide coaching to your team   

• Create growth opportunities for your team

Who is this course for?

Personnel who require an awareness and understanding of methods of oil and gas recovery.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to oil and gas recovery methods

How will this course benefit my company?

By ensuring you are introduced to the various ways oil and gas are recovered from the well.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Maritime personnel who require an introduction to or awareness of maritime Protection and Indemnity insurance.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide personnel with an awareness of the principles of maritime Protection and Indemnity Insurance.

How will this course benefit my company?

By ensuring you have an understanding of the maritime Protection and Indemnity Insurance. 

What standards are referred to in this course?

The Marine Insurance Act.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Review of all pages in the module ESS Basic, hereunder personal data, competence, activity overview and activity requests.

For Norwegian version of this course, please enrol to "OG1 Basic emergency management, (e-learning) (Norwegian version)" Course.

Proactive emergency response management involves identifying measures that can control the development in the desired direction and take action before circumstances force one to do it.
This course is the first step of the way to handle such situations and thus participate in 2nd or 3rd line emergency response organization onshore.

Course content:
• Introduction
• Defined hazard and accident situations
• External resourses
• The structure and use of emergency plan
• Training and exercises
• Evaluation and improvement
• Stress reaction in an emergency organisation
 

Learning methods:
E-learning. It is recommended that e-learning course is followed up with collection, training and exercises. Please contact course provider Proactima for a customized business services.

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates abespoke course to address these knowledge gaps.

This course covers the following learning objectives:

LO1 Explain what is meant by a Confined Space

LO2 Give examples of Confined Spaces

LO3 Describe the dangers that can be caused by confined space entry work

LO4 Identify the key pieces of legislation that help to control confined space entry work

LO5 Explain how to avoid entering confined spaces

LO6 Explain the importance of having a Safe System of Work in place

LO7 Describe individual roles and responsibilities involved in Confined Space Entry work

LO8 Explain the requirements for gas testing

LO9 Identify acceptable levels for atmospheric test results

LO10 Give examples of Confined Space Entry site safety equipment

LO11 Explain the actions to take in an emergency situation

LO12 Explain Confined Space Entry alarm procedures

This course was first developed in 2014 by the laboratory company Kystlab AS, which was our company name back then. The scaling and development of our company have included both mergers and shareholder changes, and our name is now Nemko Norlab AS – a part of renowned Nemko Group. We are still the largest, Norwegian owned laboratory company, and “Clean water offshore” is still based on our company´s year-long experience with water laboratory analysis, including potable water offshore. In Nemko Norlab the scientific know-how is further strengthened, and the service portfolio to the offshore segment expanded significantly. All together we now conduct over 100.000 routine analyses annually related to drinking water.

New in the 5th Edition

- As with the Covid-19 virus, the focus on the lethal shower microbe Legionella is increasing offshore due to the risk of disease outbreak. The training course has therefore been further strengthened to prevent Legionella disease.

- The course is also updated according to new recommendations for the annual sampling program, changes that potentially will lower analysis costs.

- This edition has also been updated in accordance with current regulations, including an important change in authority responsibility. The Institute of Public Health is no longer responsible for anything offshore.

General course info

 - The course is well illustrated to provide the best possible understanding and interpretation of the comprehensive regulations.

- There are intuitive and useful exercises throughout the course. The course is available in both Norwegian and English.

- Based on «Safe, Sufficient and Good Potable Water Offshore», the course highlights situations the participant typically may encounter in everyday work.

For more info:

- Contact your Mintra Key Account Manager to order course licenses.

- Contact anne.kristin.gussias@nemkonorlab.com for professional inquiries.

Please note: this course is also available in an Norwegian-language version.

The course is delivered by the accredited laboratory NEMCO NORLAB AS. 

Who is this course for?

Personnel who require an awareness and understanding of various water injection methods.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand water injection. 

This course contains nine modules:

Module 1: Introduction to Water Injection

Module 2: Reservoirs and Rock Properties

Module 3: Waterflooding

Module 4: Injection Water Impurities

Module 5: Water Treatment

Module 6: Water Injection Systems

Module 7: Water Quality Monitoring

Module 8: Well Design and Construction

Module 9: Operation of the Water Injection System

How will this course benefit my company?

To ensure you have the knowledge required to understand water injection.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course provider: Proactima

Who is this course for?

This Hot Work Awareness (US) Training Course is for personnel requiring knowledge or awareness of hot work hazards and controls in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an awareness of US best practice in relation to hot work.

How will this course benefit my company?

By ensuring you are aware of US best practice in relation to hot work.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

For English version of this course, please enrol to "OG1 Basic emergency management, English (e-learning)" Course.

Proactive emergency response management involves identifying measures that can control the development in the desired direction and take action before circumstances force one to do it.
This course is the first step of the way to handle such situations and thus participate in 2nd or 3rd line emergency response organization onshore.

Course content:
• Introduction
• Defined hazard and accident situations
• External resourses
• The structure and use of emergency plan
• Training and exercises
• Evaluation and improvement
• Stress reaction in an emergency organisation
 

Target group:
Target group is all personnel who will participate in 2nd and 3rd line emergency response work in the company.

Learning methods:
E-learning. It is recommended that e-learning course is followed up with collection, training and exercises. Please contact course provider Proactima for a customized business services.

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

You will be introduced to the purpose of separation.

This course contains ten modules:

Module 1: The Purpose of Separation

Module 2: Reservoir Fluids

Module 3: The Principles of Separation

Module 4: Separator Types

Module 5: Separator Construction

Module 6: Multi-stage Separation

Module 7: Separator Control

Module 8: Separator Operation

Module 9: Problems Associated with Separators

Module 10: New Separation Technology

How will this course benefit my company?

Ensure you are introduced to separation.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med opplæringen er å gi blivende riggere en god praktisk grunnopplæring i sikker bruk av riggerutstyr. Opplæringen skal gi elevene god innsikt i prinsippene for riggutstyrets konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggoperasjoner unngås. Riggoperasjon: Bruk og sammenstilling av transportabelt løfteutstyr og/ eller manuelle/ kraftdrevne vinsjer, taljer etc. som benyttes ved horisontal og/ eller vertikal forflytning av last. Opplæringen dekker den nødvendige teoretiske og praktiske opplæringen som er nødvendig for å kunne gjennomføre selvstendige riggoperasjoner. Opplæringen avsluttes med en praktisk prøve.

Modul O-2.2: Fallsikring - Søylesvingkran / enkel traverskran - Taljer / vinsjer. (16 timer opplæring).

Modul O-3.2: Rigging (32 timer opplæring) Beviset kan utstyres med opplæringsbedriftens/virksomhetens logo.

This course is only available in Norwegian.

Who is the course for?

This course aims to provide an overview of the requirements for the safe handling of radioactive materials for personnel who work closely with it.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the risks involved in working with radioactive materials.

How will the course benefit my company?

The course will benefit companies by ensuring that personnel understand the risks of working with radioactive materials and how to mitigate these risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course covers the following topics:

- Duties for safety representatives
- Tools
- Safety inspections
- Management and support

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is this course for?

Process and Production personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

By ensuring you have an overview of industry best practice associated with gas treatment

This course contains seven modules:

Module 1: Introduction to Gas Treatment

Module 2: Problems Associated with Water in Gas Streams

Module 3: Liquid Desiccant Dehydration

Module 4: Solid Desiccant Dehydration

Module 5: Alternative Gas Dehydration Processes

Module 6: Acid Gas Removal Unit

Module 7: Removal of Other Impurities in Raw Gas Streams

How will this course benefit my company?

By ensuring you have an overview of industry best practice associated with gas treatment

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course covers the following topics:

- Act and Regulations
- Purpose
- Responsibility
- Participants and roles
- Internal control regulations

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is the course for?

This eLearning course is aimed at individuals who are required to travel for business, whether at home or abroad. 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

Whether you are driving to a business meeting or working abroad, travel can present several risks. This course will give you a basic understanding of the risks that you may face while travelling and the measures you can take to keep safe and secure.

The knowledge gained in this course will help you to stay safe in your day-to-day driving  and in the event of travelling or working abroad. It will also indicate the importance of considering your surroundings and what is culturally acceptable.

How will the course benefit my company?

By ensuring you are fully aware of how to travel safely, you can help to ensure that neither you nor your company is exposed to unnecessary risk. You can also reduce your risk of being involved in a travel-related incident.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written to current HSE guidelines and industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness and understanding of power generation systems and their associated risks.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to proivde learners with an overview of power generation systems used offshore.

How will this course benefit my company?

To ensure you have an overview of the power generation systems used offshore including hazards and their associated controls.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel involved in warehouse safety operations in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to identify the hazards specific to warehousing and provide advice on how to avoid these hazards.

How will this course benefit my company?

By ensuring you are able to identify the hazards specific to warehousing and provide advice on how to avoid these hazards.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Everyone working on high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on high voltage installations.

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee refinery operations technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an introduction to the distillation of hydrocarbons.

How will this course benefit my company?

By ensuring you are introduced  to the distillation of hydrocarbons.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of the common safety methods when using lifting appliances and equipment.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give an overview of requirements for safe use of lifting appliances and equipment.

How will this course benefit my company?

By ensuring you have an overview of the requirements for the safe use of lifting appliances and equipment.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal:

This course aims to provide learners with an awareness of US best practice in relation to manual handling activities.

To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to give an overview of the OSHA requirements for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

Learning Objectives

 LO1 Define the term ‘manual handling’ and explain the importance of safe manual handling operations 

LO2 Identify the types of injuries that may result from improper manual handling operations 

LO3 Identify safe work practices in relation to manual handling operations

LO4 Describe the duties that are placed on employers and individual personnel in relation to manual handling operations

LO5 Explain the importance of risk assessing manual handling operations 

LO6 Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury 

LO7 Describe good handling techniques for safe lifting

LO8 Describe good handling techniques for pushing and pulling loads

LO9 Explain the training requirements associated with manual handling operations

Who is this course for?

Personnel involved with mechanical material handling equipment and operation, crane operation, rigging, supervision and signalling related activities. 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

To provide learners with an awareness of industry best practice for working with cranes.

This course consists of 4 sections:

Section 1: Introduction to Crane Operations

Section 2: Cranes and Lifting Equipment

Section 3: Planning a Lift

Section 4: Carrying out a Lift

How will this course benefit my company?

By ensuring you are aware of industry best practice for working with cranes.

What standards are referred to in this course?

• The Lifting Operations and Lifting Equipment Regulations (LOLER) 

• The Provision and Use of Work Equipment Regulations (PUWER) 

• The Safe Use of Lifting Equipment: Approved Code of Practice (ACOP)

• Lifting Equipment at Work Guidance

• Personal Protective Equipment at Work Regulations

• Health and Safety at Work Act s.16

• Management of Health and Safety at Work Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course covers the theoretical part of the documented safety training required for slingers and signallers. The course is also suitable as a refresher for crane operators and other personnel who have previously completed training in lifting appliances and lifting gear. The course content deals with selection, control and safe use of the most common lifting gear used in construction, industry, shipping and offshore. Signalling, communication and controlling the load are key topics of the course.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course contains 9 modules:

• Lifting equipment, expressions and acronyms
• Slinging, center of gravity, working angles and lifting tables
• Fibre slings
• Lifting gears of chain
• Wire rope slings
• Shackles
• Eye bolts, nuts and lifting lugs
• Signals and signs, and control of load
• Safety regulations for lifting operations

Who is the course for?

Personnel requiring an awareness or understanding of of typical pressure relief systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course aims to provide learners with an overview of typical pressure relief systems found in the Oil and Gas Industry.

How will the course benefit my company?

By ensuring you are introduced to the role of of typical pressure relief systems in operations.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of common drains found offshore and their importance.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to introduce learners to the different types of drain systems found in the Oil and Gas Industry.

How will this course benefit my company?

By ensuring you are introduced to the different types of drain systems found in the Oil and Gas Industry.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is the course for?

This course is aimed at individuals working in industrial sectors whose activities can impact the environment.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course will give you a basic understanding of environmental ‘aspects’ and ‘impacts’ and explain the purpose of an Environmental Management System (EMS).

The knowledge gained in this course will help you to stay in compliance with legislative requirements. It will also explain how you can play your part in improving environmental performance.

How will the course benefit my company?

By ensuring you are fully aware of the role of ISO 14001 in environmental management, you contribute to continual improvement in environmental performance, as well as ensuring that you operate in compliance with relevant regulations and legislation.

What standards are referenced in the course?

ISO 14001

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of Seawater and Firewater systems.

How will this course benefit my company?

To ensure you have an overview of Seawater and Firewater systems.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of typical chemicals in use for well operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course

How will this course benefit me?

This course aims to provide learners with an awareness of industry best practice for working with chemicals in offshore drilling and well operations

How will this course benefit my company?

By ensuring you are aware of industry best practice for working with chemicals in offshore drilling and well operations

What standards are referred to in this course?

Offshore Chemicals Regulations (OCR) 2002

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring and awarneess and understanding of welding operations and appropriate safety controls.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of industry best practice in relation to welding operations

How will this course benefit my company?

To ensure you have an overview of industry best practice in relation to welding operations

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

The OPITO Internal Verifier Award delivered through Blended Learning requires the following:

Computer/Laptop

Webcam

Printer/scanner

The Blended learning is delivered in Stages:

Stage 1 Online registration 1 hour to complete

Stage 2 Self study of the workbook provided

Stage 3 A live webinar 1 day of 6 hours. (sessions run once per week)

The following units will be discussed and practical exercises completed on the live webinar following a 1 hour Exam:

1. Introduction to Internal Verification

1.1 The Purpose of Internal Verification

2. The Internal Verifier’s Role

2.1 Supporting Assessors

2.2 Monitoring and Verifying the Quality of Assessments

2.3 Record Keeping and Feedback

2.4 Assuring the Competence Process

Delegates attending this Internal Verifier Blended Learning training programme will be given a series of explanations and demonstrations that will identify what they are expected to know and do. This will be followed by practical exercises allowing delegates to rehearse their skills, knowledge and understanding of the Internal Verifier role. All practical exercises conducted on the live webinar shall use, wherever possible, the actual paperwork that the delegates are expected to use in their workplace.

Stage 4- Workplace verifications to be completed within 12 months of training to become a fully qualifed OPITO Internal verifier 

OPITO Internal Verifier Award Standard 

Who is the course for?

All personnel, especially those who require an overview of produced water systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course is designed to provide you with a basic knowledge of how water is removed from oil and gas reservoirs and how it is treated prior to reuse or disposal.

How will the course benefit my company?

This course helps to ensure that all personnel apply a common approach to both company and industry best practice in relation to managing produced water.

What standards are referenced in the course?

• The Offshore Petroleum Activities (Oil Pollution Prevention and Control) Regulations 

• The Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation (REACH)

• OSPAR Harmonised Mandatory Control Scheme (OSPAR HMCS)

• US Environmental Protection Agency Federal Insecticide, Fungicide and Rodenticide Act (FIFRA)

• Methodology for the Sampling and Analysis of Produced Water

• Environmental Protection Agency's Method 1664

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel working in the Oil and Gas Industry

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an introduction to the Environmental Impact Assessment (EIA) process and explains the key stages in undertaking an EIA.

How will this course benefit my company?

By ensuring you are introduced to  the Environmental Impact Assessment (EIA) process and explains the key stages in undertaking an EIA.

What standards are referred to in this course?

Environmental Impact Assessment (EIA)

Environmental Statment (ES)

Assessment of the Effects of Certain Public and Private Activities on the Environment EU Directive (as amended by Directive 97/11/EC

Offshore Petroleum Production and Pipelines (Assessment of Environmental Effects) Regulations (EIA Regulations)

EU Directive 2003/35/EC

Offshore Petroleum Activities (Conservation of Habitats) Regulations

Merchant Shipping (Oil Pollution Preparedness, Response and Co-operation Convention) Regulations

Offshore Marine Conservation (Natural Habitats, & c.) Regulations

Marine and Coastal Access Act and Marine (Scotland) Act

Offshore Chemicals Regulations, and 

Offshore Combustion Installations (Prevention and Control of Pollution) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.