Course catalogue

Who is this course for?

Personnel requiring an awareness or understanding of drilling technology.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to the Oil and Gas Industry and the different stages required for extracting and producing hydrocarbons.

How will this course benefit my company?

By ensuring you have an introduction to the Oil and Gas Industry and the different stages required for extracting and producing hydrocarbons.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is aimed at employees working in the US or subject to OSHA regulations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of an employee’s right to implement their stop work authority.

How will this course benefit my company?

By ensuring you are aware of an employee’s right to implement their stop work authority.

What standards are referred to in this course?

Workers’ Right to Refuse Dangerous Work

Is there an assessment?

Yes - Trainingportal assessment with an 80% pass mark and two attempts.

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an introduction to Gas Compression.

The course has seven modules:

Module 1: Introduction to Gas Compression

Module 2: Gas Compression Systems

Module 3: Gas Compressors and their Principles

Module 4: Gas Compressors and their Components

Module 5: Gas Compression Systems: Controlling Surge

Module 6: Gas Compression Systems: Start-up and Shutdown

Module 7: Gas Compression Systems: Innovation

How will this course benefit my company?

To ensure you have had an introduction to Gas Compression.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.This course has seven modules:

This course is made for personnel who organize or perform: planning, installation, inspection and maintenance of Ex equipment.

The course gives an introduction and repetition in different subjects treated in the IEC 60079 Standard (NEK EN 60079).

The course duration is 5 hours and is valid for 5 years

The course can also be taken as a refresher course for Ex maintenance

Themes:

• Fundamental Ex philosophy, refresher

• Preparing and installing electrical equipment in hazardous areas

• Inspection and maintenance of electrical equipment in Ex areas

• Understand what maintenance tasks can be done locally, and what must be performed by an authorized workshop

• Give candidates for CompEx certification a solid background for the theoretical assessment

Who is this course for?

This course aims to provide learners with an awareness of US best practice in relation to the values that govern responsible corporate practice and personal behaviors in the workplace.

Is previous experience required?

No previous experience is required. 

How will this course benefit me?

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behavior in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. 

You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

How will this course benefit my company?

By ensuring that all personnel are familiar with applicable laws on human rights, equality, discrimination and corruption.

What standards are referred to in this course?

The Civil Rights Act 1964

The UK Equality Act 2010

The US Foreign Corrupt Practices Act 

The UK Bribery Act 2010

The International Labor Organization (ILO)

Is there an assessment?

No

Who is this course for?

For all personnel who are involved in working with gas turbines.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to gas turbines and how they are designed and operated.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of gas turbines and how they are designed and operated.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course provides an introduction to the understanding of gas in high risk work situations.  It describes real dangers and explains about the most common types of gas.  The course provides increased understanding and knowledge of elements of risk when working in areas exposed to gas, and knowledge of how best to protect yourself, and others, using proper equipment. Users shall become acquainted with the possibilities and limitations presented by gas measurement equipment, in relevant situations.

Course Content

- Introduction

- Relevant terms

- Air and closed spaces

- Oxygen measurement

- Explosive gases

- Toxic gases

- Conclusion

Who is this course for?

All personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide learners with the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

How will this course benefit my company?

To ensure you have the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.

This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.

Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.

COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.

STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY? 

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment. 

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.

For more information and prices: 

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

À l'issue de ce cours, vous devriez pouvoir:

•  Expliquer l'importance de la prévention des déversements

•  Identifier les sources de déversements potentielles

•  Décrire les impacts environnementaux potentiels associés aux déversements

•  Décrire les contrôles réglementaires associés à la prévention et à l'intervention en cas de déversement

•  Expliquer l'objectif des plans d'urgence en cas de pollution par hydrocarbures (PUPH)

•  Identifier les actions à prendre et les exigences en matière de signalement en cas de déversement, et

•  Décrire les actions quotidiennes que tout le personnel peut prendre pour empêcher des déversements mineurs

Who is this course for?

All employees at all levels of the organisation who require an awareness of steps to take in the event of armed attack.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

The main idea behind the course is that knowledge about and reflection on what to do makes us feel more confident and able to make informed choices.  In a public area or at work, are you aware of what the premises look like, and how you can evacuate if a situation should occur? In order of priority you should act in this way; Run, Hide, Fight!

The course describes these guidelines in more details and also allows the user to reflect upon various aspects of an armed attack.

How will this course benefit my company?

By ensuring you are aware of the priorities should an armed attack occur.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

There is no exam upon completion of this course.

À l'issue de ce cours, vous devriez pouvoir :

• Identifier les risques inhérents à un travail en hauteur et expliquer l'importance de la planification et de la gestion des risques

• Identifier les exigences législatives et réglementaires qui aident au contrôle des travaux en hauteur

• Décrire les principales méthodes d'accès pour travailler en hauteur et les différents types d'équipement pour le travail en hauteur 

• Décrire la hiérarchie de contrôle pour la gestion et la sélection de l'équipement lié au travail en hauteur

• Expliquer comment utiliser  correctement un harnais de sécurité, et

• Décrire les règles pour travailler avec des échelles et des échafaudages ainsi que l'importance de l'inspection de l'équipement

The aim of this training programme is to impart the initial training to enable trainee competence assessors, now referred to as learners, to acquire the necessary knowledge and skills which underpin the tasks to be performed as a Competence Assessor.

The objectives of this training are that learners will be able to:

(a) Understand the principals and corresponding roles and responsibilities involved in competence assessment

(b) Plan and carry out an assessment

(c) Monitor and verify assessment records

(d) Objectively review and assess different types of evidence

(e) Understand the importance of robust record keeping

(f) Deliver assessment feedback

The OPITO Competence Assessor Award delivered through Blended Learning requires the following:

Computer/Laptop

Webcam

Printer/scanner

The Blended Learning is delivered in Stages. Access to the e-learning modules are in My Training tab in the Training portal. Stage 1 & 2 are found in the OPITO Competence Assessor Award e-learning module 1. 

Stage 1 - Online registration 1 hour to complete

Stage 2- E-learning modules Self-study 5/6 hours recommended

Stage 3- Live instructor webinar and online test 1 full day (sessions run twice weekly)

Stage 4- Upon successful completion of the training, and with evidence that the skills and knowledge have been successfully applied in the workplace, the learner would be eligible to conduct workplace assessments, providing they themselves are technically competent in the discipline being assessed. Following this training, it will be the responsibility of the employing organisation to allow each assessor to gain further experience. 

Who is this course for?

All relevant personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

How will this course benefit my company?

By ensuring you have an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

What standards are referred to in this course?

Provision and Use of Work Equipment Regulations 1998 (PUWER)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of fuel systems

How will this course benefit my company?

By ensuring you have an overview of fuel systems

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who require knowledge or awareness of dangerous goods within HEMS operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course is part of the required trainings for HEMS operating crew, and covers classification of dangerous goods, how dangerous goods is divided into hazard classes, how it should be marked and labelled and what emergency procedures should contain.

This course must be repeated every 24 months.

How will the course benefit my company?

By ensuring you are familiar with the classification of dangerous goods, how dangerous goods is divided into hazard classes, how it should be marked and labelled and what emergency procedures should contain.

What standards are referenced in the course?

• International Civil Aviation Organization (ICAO)

• International Air Transport Association (IATA)

Who is this course for?

Personnel requiring awareness or understanding of upstream oil and gas operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of upstream oil and gas operations.

How will this course benefit my company?

By ensuring you have an overview of the process of upstream oil and gas operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Maritime personnel who may be affected by potential baggage searches.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide an introduction to personnel and baggage searches in the Maritime Industry.

How will this course benefit my company?

By ensuring you are aware of the personnel and baggage searches which might be carried out. 

What standards are referred to in this course?

SOLAS ch. 11 - ISPS code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Ce cours est destiné à vous présenter les bonnes pratiques de l'industrie concernant le travail avec accès à des espaces confinés.

Lorsque ce cours sera terminé, vous devriez pouvoir :

• Expliquer les exigences dictées par les bonnes pratiques de l'industrie relatives au travail impliquant l'accès à des espaces confinés.

Who is this course for?

Personnel requiring an awareness or understanding of flare systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides an overview of flare systems.

How will this course benefit my company?

By ensuring you have an overview of flare systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is suitable for all personnel to assist in first aid.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course is designed to enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

How will this course benefit my company?

By ensuring you enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

À l'issue de ce cours, vous devriez pouvoir :

• Identifier les principaux problèmes environnementaux 

• Expliquer l'importance pour une entreprise d'être écoresponsable 

• Expliquer le rôle des systèmes de gestion environnementale et de la norme ISO 14001 en matière de gestion de l'environnement 

• Expliquer le rôle de l'autorité de réglementation 

• Définir les termes « aspect » et « impact » dans le contexte écologique 

• Identifier les impacts sur l'environnement des rejets de forage, des émissions atmosphériques, des eaux produites et autres rejets provenant du pétrole, des déversements, des rejets de produits chimiques, des déchets, du bruit et des perturbations des fonds marins 

• Décrire les manières de limiter l'impact sur l'environnement, et

• Expliquer que tout le monde a un rôle à jouer dans la protection de l'environnement et savoir de quelle manière remplir ce rôle

"Who is this course for?

Personnel requiring awareness or understanding of gas detection and measurement methods.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide information about the types of gases found in the oil and gas industry and how these gases are detected and measured

How will this course benefit my company?

By ensuring you have  information about the types of gases found in the oil and gas industry and how these gases are detected and measured

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. "

Who is the course for?

This course is for personnel who require an insight into Norwegian maritime rules and regulations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an introduction to the Norwegian maritime rules and regulations and to provide details of how much of an influence Norway has over the global maritime industry.

How will the course benefit my company?

This course will benefit shipping operators and companies by ensuring that their staff have an awareness of the Norwegian Maritime Authority, Norwegian maritime rules and regulations and all other relevant legislation.

What standards are referenced in the course?

International Safety Management (ISM) Code

Freedom of Information Act

Norwegian International Ship Register Act

Ship Labour Act

Ship Safety and Security Act

Norwegian Maritime Act

International Convention for the Safety of Life at Sea (SOLAS)

International Regulations for Preventing Collisions at Sea (COLREGS)

International Convention for the Prevention of Pollution from Ships (MARPOL)

International Ship and Port Facility Security (ISPS) Code

Norwegian Maritime Code

Maritime Labour Convention (MLC)

Equality and Anti-discrimination Act

Accommodation of Crews Convention

Principles of Safe Manning

International Convention on Standards of Training, Certification and Watchkeeping for Seafarer (STCW)

Norwegian Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations. 

Course goal:

This course aims to provide learners with an understanding of US best practice in relation to working with asbestos.

This course aims to provide learners with an understanding of the hazards associated with exposure to asbestos. It will also identify where asbestos may be found, how it can potentially affect your heath, and what you need to do to protect yourself from exposure. 

Learning Objectives: 

LO1 Explain what asbestos is

LO2 Describe the various types, properties and uses of asbestos 

LO3 Describe the hazards of asbestos

LO4 Identify the regulatory protective measures that should be implemented when working with asbestos

LO5 Give an overview of the health impacts of asbestos exposure

LO6 Identify areas where asbestos may still be found and describe how to identify its presence

LO7 Explain what should be considered when planning work and undertaking a risk assessment

LO8 Describe the typical procedures to deal with an emergency involving the uncontrolled release of dust containing asbestos fibers

Who is the course for?
This eLearning course is aimed at individuals who are required to travel overseas on business, particularly to high-risk locations where there is a threat of criminal activity, civil unrest and terrorism.

Is previous experience required?
There is no requirement for prior knowledge or experience before completing this course and it is assumed that you are competent in your designated role.

How will the course benefit me?
When you travel somewhere new, your lack of local knowledge can mean that you may be more likely to be targeted by criminals. This course will give you a basic understanding of the threats commonly faced by travellers and explain how you can reduce the likelihood of a health or security incident.

The knowledge gained in this course will help you to assess your personal risk so that you can stay safe while travelling. It will also outline the basic principles of safety and security.

How will the course benefit my company?
By ensuring you are fully aware of the risks that you may face when travelling, you can keep yourself, and your company's assets and information, safe.

What standards are referenced in the course?
This course does not contain reference to specific legislation or standards but is written to current travel security guidelines and industry best practice.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

Course Goal: 

This course aims to provide an awareness of US best practice in relation to working with Naturally Occurring Radioactive Material (NORM).

Learning Objectives:

LO1 Define what is meant by NORM and where it is found

LO2 Explain what is meant by ‘radioactive material’ and the difference between alpha particles, beta particles and gamma rays

LO3 Describe the hazards associated with NORM

LO4 Identify the pathways for exposure to NORM

LO5 Identify the radiation protection principles

LO6 Explain the importance of radiation monitoring

LO7 Identify control measures that can be used to minimize the risk posed by NORM

LO8 Describe the PPE that should be used when working with NORM

LO9 Explain how to limit decontamination and correctly dispose of NORM

Course Goal: This course aims to provide an introduction to the decommissioning process and an overview of the regulations governing decommissioning on the United Kingdom Continental Shelf (UKCS).

Who is the course for?

All relevant personnel

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives:

LO1 Give an overview of the history of oil and gas production on the United Kingdom Continental Shelf (UKCS)

LO2 Explain why decommissioning activity is increasing on the UKCS

LO3 Describe what is meant by ‘decommissioning’

LO4 Explain the scope of decommissioning on the UKCS

LO5 Provide an overview of relevant decommissioning legislation and regulations

LO6 Explain the impact of the Brent Spar incident on decommissioning regulation

LO7 Provide an overview of the OSPAR Decision 98/3

LO8 Identify the different phases of the decommissioning lifecycle

LO9 Provide a basic overview of well plugging and abandonment 

LO10 Provide an overview of the different methods of decommissioning

LO11 Provide examples of decommissioning projects on the UKCS

LO12 Give examples of the types of hazards which may be encountered during decommissioning

Who is this course for?

Personnel requiring an awareness or understanding of US ladder safety.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of ladder safety.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US ladder safety.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Ce cours devrait vous permettre de :

• Acquérir une meilleure compréhension des dangers associés au sulfure d'hydrogène et des mesures de détection et de protection nécessaires à mettre en place et à respecter

• Identifier les niveaux et limites légaux d'exposition professionnelle qui ont été mis en place pour votre protection

• Expliquer les responsabilités des employeurs concernant la gestion des risques associés à une exposition potentielle au sulfure d'hydrogène sur le lieu de travail

• Expliquer les devoirs des employés quant à l'observation des procedures pertinentes relatives au sulfure d'hydrogène et au suivi des recommandations fournies par les employeurs ou les propriétaires d'installation.

Who is this course for?
Newcomers to the Oil and Gas Industry

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide a brief overview of fire and safety systems

How will this course benefit my company?
By ensuring you have a brief overview of fire and safety systems.

What standards are referred to in this course?
Health and Safety at Work Act
The Management of Health and Safety at Work Regulations
The Regulatory Reform (Fire Safety) Order
The Fire (Scotland) Act

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations offshore.

The course also provides first-aid instruction and training. CPR training must be completed separately.

In accordance with section 7 of FSE, FSE and and first-aid training must be completed at least once a year. In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course addresses a variety of issues and covers how to prevent electrical accidents, routines in the event of accidents, and theoretical first aid, and aims to help prevent harm to people, equipment, and installations.

Who is this course for?

Personnel involved in UK oil and gas operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to highlight best practice in relation to environmental compliance and toidentify the environmental regulatory regime that oversees offshore installations and oil and gas operations within the UK Continental Shelf (UKCS).

How will this course benefit my company?

By ensuring you have been introduced to best practice in relation to environmental compliance and toidentify the environmental regulatory regime that oversees offshore installations and oil and gas operations within the UK Continental Shelf (UKCS).

What standards are referred to in this course?

 ISO 14001

Environmental Impact Assessment (EIA) Regulations

Habitat and Conservation Regulations

European Union Habitat Directive

Environmental Statement

Environmental Policy

European Union Offshore Safety Directive

OSPAR Convention

The Offshore Petroleum Production and Pipelines (Assessment of Environmental Effects) Regulations

The Offshore Petroleum Activities (Conservation of Habitats) Regulations

The Offshore Marine Conservation Regulations

The Offshore Combustion Installations (Prevention and Control of Pollution) Regulations

The Offshore Installations (Emergency Pollution Control) Regulations

The Offshore Chemical Regulations

The Greenhouse Gas Emissions Trading Scheme Regulations

The Offshore Petroleum Activities (Oil Pollution Prevention and Control) (OPPC) Regulations

The REACH Enforcement Regulations

The Fluorinated Greenhouse Gases Regulations

Integrated Pollution Prevention and Control (IPPC) Directive) 

Control of Major Accident Hazards (COMAH) Regulations

Merchant Shipping (Prevention of Pollution by Sewage and Garbage from Ships) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of US respiritory protection and RPE.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of RPE.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US RPE.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course covers the following topics:

- How to handle substance abuse
- Drug policies
- AKAN

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is this course for?

Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of coiled tubing equipment and its operation.

How will this course benefit my company?

To ensure you have an overview of coiled tubing equipment and its operation.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of Oil and Gas metering, Sampling and Pigging

This course contains seven modules:

Module 1: Introduction to Metering

Module 2: Gas Metering Principles of Flow Measurement

Module 3: Gas Metering

Module 4: Oil Metering

Module 5: Metering Operations

Module 6: Sampling Systems

Module 7: Pigging

How will this course benefit my company?

To ensure you have an overview of Oil and Gas metering, Sampling and Pigging

What standards are referred to in this course?

The course is made according to industry best practice. 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course aims to  provide learners with an overview of US best practice in relation to working with hand and power tools.

This course aims to provide an understanding of the potential hazards associated with the use of hand tools and power tools, as well as the safety precautions required to prevent those hazards from occurring.

Learning Objectives:

LO1 Identify the general hazards and control measures associated with hand and power tools

LO2 Identify specific hazards associated with hand tools

LO3 Give an overview of general power tool safety precautions

LO4 Explain how guards provide protection to operators

LO5 Give examples of tools that must be equipped with a momentary switch

LO6 Identify specific hazards and control measures related to the use of electric tools

LO7 Identify the proper procedures to follow when using a grinder

LO8 Identify specific hazards and control measures related to the use of pneumatic tools

LO9 Identify specific hazards and control measures related to the use of powder-actuated tools

LO10 Identify specific hazards and control measures related to the use of hydraulic jacks

Who is this course for?

Personnel who work with pumps in the Oil & Gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the various types of pumps used in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel who work with pumps have an overview of each type and how they work.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Presentation 

This training course aims at providing a general description of the different types of lifting appliances that may be found on board ships and offshore units, their main characteristics and operating principles. It provides an introduction to the applicable rules and regulations related to lifting appliances. 

Objectives

On completion of the training, students will be able to: 

Get familiar with the various types of lifting appliances installed on board ships and offshore units. 

Know the regulations, which are relevant for inspection and certification of cargo gear, including international regulations and BV Rules. 

Understand the particularities of lifting appliances and the relevant requirements for the survey of materials and equipment.

Understand the scope of intervention for Cargo Gear in various stages – design, manufacturing and operation, including an overview of control and safety design requirements.

Program

Types of lifting appliances

Definitions

Derrick systems

Cranes

Typical crane types

Applicable Rules and Regulations

International Regulations and National Requirements

Bureau Veritas Rules, additional class notations and recognized standards

Bureau Veritas services

Cargo Gear Register Book

Design, Inspection, testing and surveys at works

Design acceptance criteria

Documents to be submitted

Inspection and testing

Steel wire ropes and fibre ropes

Loose gear

Winches

Survey of fitting on board

Overall tests prior to putting into service: Mandatory tests, overload test, testing at

Manufacturer’s test bench, inspections after testing

Marking

In-service surveys

Periodicity, scope and documentation

Guidelines for a thorough annual examination

Items to be tested: slew bearing, loose gear examination, ropes, hydraulic system

Control and safety devices

Thickness measurements, wear limits and criteria for replacement

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Cargo Gear and Lifting Appliances, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Cargo Gear and Lifting Appliances is obtained after completion of the course and passing the online test. 

Who is this course for?

Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of wireline equipment and its operation.

How will this course benefit my company?

To ensure you have an overview of wireline equipment and its operation.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course provides knowledge about the structure, operation, applications and usage, maintenance and monitoring of the appropriate tool. The training provides knowledge about the requirements for safe use and operation stipulated in regulations and instructions.

Along with a practical review of the tools, the course meets the requirements for documented training in hazardous work equipment in Regulations concerning the Performance of Work.

The course covers the following subjects:

- Introduction to general HSE
- Angle grinder
- Hammer drills, jackhammers and combihammers
- Powder actuated gun
- Nail gun
- Saws with blade (includes table saw, crosscut and miter Saw, circular saw, jigsaw and reciprocating saw)
- Chain saw

We investigate to learn, to implement preventive measures and prevent recurrence of adverse events. Investigating an incident is like peeling an onion. We start with the direct causes which are the most visible. To get to the bottom of the events we must uncover "layer upon layer" which others causes lay behind. The technological development, and new forms of organizations, increase the complexity and it becomes more difficult to understand the connection between the incident and the underlying causes. This course presents method, organization and process for the implementation of investigations. The course can also be offered in combination with a classroom session.

COURSE CONTENT

- Description and classification of events

- Organization of an investigation

- Collection and securing of information

- The cause of loss model

- MTO model

- STEP model

- Reporting and follow-up

HOW WILL THIS COURSE BENEFIT ME AND MY COMPANY?

After completing the course, participants should understand what investigation is and know the various steps in an investigation process. Participants will also receive knowledge of how investigations are conducted and implemented in practice.

Course provider: Proactima

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable .

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Presentation

This training course aims at providing a general description of the requirements for the prevention of pollution by sewage from ships as defined by the Annex IV of the MARPOL Convention.

Objectives

On completion of the training, students will be able to:

Understand the MARPOL requirements for prevention of sewage pollution from ships.

Know the various sewage treatment systems which are accepted by the MARPOL Convention.

Know the equipment required on board different ship types.

Understand the criteria defined in the convention for the control of discharge of sewage.

Understand the requirements for survey and certification of ships.

Program

Introduction

Applicability

Definitions

Equipment

Types of sewage systems

Sewage treatment plant

Holding tank

Sewage comminuting and disinfecting system

Standard discharge connection

The special case of livestock carriers

Discharge criteria

Discharge of sewage from ships other than passenger ships

Discharge of sewage from passenger ships outside special areas

Discharge of sewage from passenger ships within a special area

Survey and certification

International Sewage Pollution Prevention Certificate

Certificate entries: Number of persons the ship is certified to carry; New or existing ship; 

New or existing passenger ship for the application of Regulation 11.3

Survey requirements

Type Approval Certificate for sewage treatment plants

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of MARPOL Sewage Pollution, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Sewage Pollution is obtained after completion of the course and passing the online test.

Performance management ensures that the day-to-day activities are focused towards achieving organizational goals. In this lesson, you will learn about setting SMART goals by implementing the SMART model. Whether you are using the SMART model to define the specifics of a small business goal or to manage an enterprise-wide project, you will find that this system lends clarity, focus, and flexibility to the art of goal setting.

• Explain SMART goals

• Identify SMART goal benefits and examples

Este curso está diseñado para brindarle al personal costa afuera un conocimiento general sobre los peligros y medidas de control que se relacionan con las áreas de trabajo de la instalación en las que puede estar presente el H2S.

• Comprender mejor los peligros que se relacionan con el H2S y las medidas necesarias de detección y protección que deben tenerse y cumplirse

• Identificar los niveles y límites de exposición laboral legales que se han establecido para su protección.

• Explicar las responsabilidades de los empleadores en lo que respecta a la gestión de riesgos asociados a la posible exposición al H2S en el lugar de trabajo.

• Explicar las tareas de los empleados respecto de cumplir con los procedimientos pertinentes sobre H2S y seguir las pautas que proporcionan los empleadores o propietarios de las instalaciones.