Course catalogue

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

Who is this course for?

This course is aimed at all personnel involved in mechanical joint operations, particularly those who are expected to undertake related duties in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide learners with an introduction to the principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems. This course is intended to reflect industry """"best practice"""" for competence in relation to mechanical joint operations and applies to both the onshore and offshore Oil and Gas Industry.

This course contains the following sections:

Section 1: An Introduction to Mechanical Joint Integrity

Section 2: Principles of Hand Torquing

Section 3: Principles of Hydraulic Tensioning

Section 4: Principles of Controlling Tightening

How will this course benefit my company?

By ensuring you are introduced  to the  principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems

What standards are referred to in this course?

N/A

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel involved in Marine maintenance activities.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide information on how to reduce corrosion in the Maritime Industry.

How will the course benefit my company?

By reducing equipment failures due to corrosion.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Chief, Deck and Engine Officers

New departmental staff, crew members (both offshore and onshore)

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give you an overview of cargo operations and procedures for cargo handling and precautions at tanker and terminal.

How will the course benefit my company?

Raising awareness of precautions at tanker and terminal and providing the crew with clear procedures for cargo handling can reduce the risk of unwanted tanker operation incidents.

What standards are referenced in the course?

STCW 78 AND 1995 revised

MCA 2006

IMO / ISGOTT / COSWP

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All personnel involved in marine operations.

Is previous experience required?

No experience is required to take this course.

How will this course benefit me?

By ensuring you know how to respond to marine trash and debris incidents.

How will this course benefit my company?

By ensuring you know how to respond to marine trash and debris incidents.

What standards are referred to in this course?

US best practise.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel that come into contact with compressed air through maintenance or usage.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring.

How will the course benefit my company?

To reduce compressed air incidents and accidents.

What standards are referenced in the course?

No standard or regulations are referenced in this course

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel who may have to carry out manual handling duties.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with information to help reduce the risk of injury due to incorrect manual handling.

How will the course benefit my company?

By reducing lost time due to injury as a result of poor manual handling techniques.

What standards are referenced in the course?

• International Labour Organisation

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel who require an understanding of major accidents in the maritime industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to major accident hazards.

How will the course benefit my company?

This course will provide personnel with an introduction to major accident hazards and the role that they play in the mitigation of catastrophic events.

What standards are referenced in the course?

Safety and Environmentally Critical Elements (SECE)

ISM Code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
Deck Officers and Deck Crew.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide learners with an introduction to Emergency Towing Systems (ETS) in the Maritime Industry.

How will this course benefit my company?
By ensuring you have an understanding of the Emergency Towing Systems.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
All personnel involved in rigging and lifting operations

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course will provide you with an overview of rigging and lifting operations.

How will this course benefit my company?

This course will provide personnel with an overview of rigging and lifting operations.

What standards are referred to in this course?

• The Lifting Operations and Lifting Equipment Regulations (LOLER) 

• The Provision and Use of Work Equipment Regulations (PUWER) 

• The Safe Use of Lifting Equipment: Approved Code of Practice (ACOP)

• Lifting Equipment at Work Guidance

• The Personal Protective Equipment at Work Regulations

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who are at risk from slips, trips and falls.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

How will this course benefit my company?

This course will benefit companies by reducing slip, trip and fall injuries among personnel.

What standards are referred to in this course?

• Health and Safety at Work Act

• Management of Health and Safety at Work Regulations 

• Workplace (Health, Safety and Welfare) Regulations 

• Health and Safety Executive (HSE)

Is there an assessment?

Yes

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area.

The pre-assessment uses a pool of questions to test your current knowledge.

The results of this assessment help identify your personal knowledge gaps.

FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

You will ONLY be given content on any knowledge gaps identified in the pre-assessment.

Your knowledge and understanding is then re-assessed.

If you successfully complete all of the FAST TRACK pre-assessment questions correctly, then your knowledge is deemed complete and no course content or further assessment will be required.

Who is this course for?
Newcomers to the Oil and Gas Industry

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide a brief overview of fire and safety systems

How will this course benefit my company?
By ensuring you have a brief overview of fire and safety systems.

What standards are referred to in this course?
Health and Safety at Work Act
The Management of Health and Safety at Work Regulations
The Regulatory Reform (Fire Safety) Order
The Fire (Scotland) Act

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Presentation 

This training course aims at providing a general description of the different types of lifting appliances that may be found on board ships and offshore units, their main characteristics and operating principles. It provides an introduction to the applicable rules and regulations related to lifting appliances. 

Objectives

On completion of the training, students will be able to: 

Get familiar with the various types of lifting appliances installed on board ships and offshore units. 

Know the regulations, which are relevant for inspection and certification of cargo gear, including international regulations and BV Rules. 

Understand the particularities of lifting appliances and the relevant requirements for the survey of materials and equipment.

Understand the scope of intervention for Cargo Gear in various stages – design, manufacturing and operation, including an overview of control and safety design requirements.

Program

Types of lifting appliances

Definitions

Derrick systems

Cranes

Typical crane types

Applicable Rules and Regulations

International Regulations and National Requirements

Bureau Veritas Rules, additional class notations and recognized standards

Bureau Veritas services

Cargo Gear Register Book

Design, Inspection, testing and surveys at works

Design acceptance criteria

Documents to be submitted

Inspection and testing

Steel wire ropes and fibre ropes

Loose gear

Winches

Survey of fitting on board

Overall tests prior to putting into service: Mandatory tests, overload test, testing at

Manufacturer’s test bench, inspections after testing

Marking

In-service surveys

Periodicity, scope and documentation

Guidelines for a thorough annual examination

Items to be tested: slew bearing, loose gear examination, ropes, hydraulic system

Control and safety devices

Thickness measurements, wear limits and criteria for replacement

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Cargo Gear and Lifting Appliances, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Cargo Gear and Lifting Appliances is obtained after completion of the course and passing the online test. 

Presentation

This training course aims at providing a general description of the requirements for the prevention of pollution by sewage from ships as defined by the Annex IV of the MARPOL Convention.

Objectives

On completion of the training, students will be able to:

Understand the MARPOL requirements for prevention of sewage pollution from ships.

Know the various sewage treatment systems which are accepted by the MARPOL Convention.

Know the equipment required on board different ship types.

Understand the criteria defined in the convention for the control of discharge of sewage.

Understand the requirements for survey and certification of ships.

Program

Introduction

Applicability

Definitions

Equipment

Types of sewage systems

Sewage treatment plant

Holding tank

Sewage comminuting and disinfecting system

Standard discharge connection

The special case of livestock carriers

Discharge criteria

Discharge of sewage from ships other than passenger ships

Discharge of sewage from passenger ships outside special areas

Discharge of sewage from passenger ships within a special area

Survey and certification

International Sewage Pollution Prevention Certificate

Certificate entries: Number of persons the ship is certified to carry; New or existing ship; 

New or existing passenger ship for the application of Regulation 11.3

Survey requirements

Type Approval Certificate for sewage treatment plants

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of MARPOL Sewage Pollution, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Sewage Pollution is obtained after completion of the course and passing the online test.

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable .

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Who is this course for?

All employees at all levels of the organisation who require an awareness of steps to take in the event of armed attack.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

The main idea behind the course is that knowledge about and reflection on what to do makes us feel more confident and able to make informed choices.  In a public area or at work, are you aware of what the premises look like, and how you can evacuate if a situation should occur? In order of priority you should act in this way; Run, Hide, Fight!

The course describes these guidelines in more details and also allows the user to reflect upon various aspects of an armed attack.

How will this course benefit my company?

By ensuring you are aware of the priorities should an armed attack occur.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

There is no exam upon completion of this course.

Who is the course for?

All trainee Maritime personnel working with fuel systems.

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

By providing you with an overview of fuel systems.

How will the course benefit my company?

By providing personnel with an overview of fuel systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This Hot Work Awareness (US) Training Course is for personnel requiring knowledge or awareness of hot work hazards and controls in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an awareness of US best practice in relation to hot work.

How will this course benefit my company?

By ensuring you are aware of US best practice in relation to hot work.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
This Personnel Transfer & Evacuation (US) course is suitable for all relevant offshore personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
This course aims to provide an overview of US best practice in relation to the transfer and evacuation of personnel. This course in Personnel transfer and evacuation is divided into and covers the following topics: Pre transport offshore, vessel transport offshore, helicopter transport offshore and evacuation offshore.

How will this course benefit my company?

By ensuring you are aware of the US best practice in relation to the transfer and evacuation of personnel.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This course is for personnel who require an insight into Norwegian maritime rules and regulations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an introduction to the Norwegian maritime rules and regulations and to provide details of how much of an influence Norway has over the global maritime industry.

How will the course benefit my company?

This course will benefit shipping operators and companies by ensuring that their staff have an awareness of the Norwegian Maritime Authority, Norwegian maritime rules and regulations and all other relevant legislation.

What standards are referenced in the course?

International Safety Management (ISM) Code

Freedom of Information Act

Norwegian International Ship Register Act

Ship Labour Act

Ship Safety and Security Act

Norwegian Maritime Act

International Convention for the Safety of Life at Sea (SOLAS)

International Regulations for Preventing Collisions at Sea (COLREGS)

International Convention for the Prevention of Pollution from Ships (MARPOL)

International Ship and Port Facility Security (ISPS) Code

Norwegian Maritime Code

Maritime Labour Convention (MLC)

Equality and Anti-discrimination Act

Accommodation of Crews Convention

Principles of Safe Manning

International Convention on Standards of Training, Certification and Watchkeeping for Seafarer (STCW)

Norwegian Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.