Course catalogue

Presentation

This training course provides an overview of the Ultrasonic Testing (UT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of ultrasonic testing.

Know the testing procedure and the inspection process referred to the equipment used.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of calibration and reference blocks to ensure the quality of test performance and test results.

Program

Basic principle

o Ultrasonic waves and propagation

o Ultrasonic pulse-echo principle

Equipment and testing materials

o Ultrasonic testing instruments

o Ultrasonic testing probes

o Coupling media

o Calibration and reference blocks

Testing procedure

o Surface preparation

o Scanning – ultrasonic testing techniques

o Testing parameters

o Examination

o Data presentation

Applications and acceptance criteria

o Scope

o Indication evaluation

o Acceptance criteria

o Test report

Reliability, quality of test results

o UT system performance

o NDT personnel competence

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Ultrasonic Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Ultrasonic Testing is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general introduction to welding, including an introduction to metallurgy, general information concerning welding, an overview of the electric arc processes commonly used in shipbuilding and details of welding inspection.

Objectives

On completion of the training, students will be able to:

Understand the nature and know the mechanical properties of metals; Understand the production process of steel and aluminium and the application of casting and forging processes.

Understand fundaments of fusion welding; Know how to determine heat input and preheat temperature; Understand the influence of the thermal cycle on weld microstructure and distortion; Know the general types of welding joints and the different welding positions

Know how to differ and recognize the arc welding processes used in shipbuilding; Understand the applicability and limitations of the different welding processes; Get familiar with common types of arc welding equipment and power sources

Know and apply the required activities in welding inspection; Determine and arrange the scope of inspection plan for different tasks; Know the different types of weld imperfections; Understand how to perform visual inspection of welding

Program

Module 1 – Introduction to Metallurgy

Module 2 – Welding Fundamentals

Module 3 – Arc Welding Processes

Module 4 - Welding Inspection

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Welding Fundamentals, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Welding Fundamentals is obtained after completing the course and passing the online test.

Strict regulations and procedures exist for the safe and efficient operation of ships and yachts - and UK regulations and procedures may differ from those you may be familiar with in other flag vessels. This guide mainly deals with issues specific to yachts, such as operations and manning standards, and what to do about them.

This online course will help you to comply with UK requirements by focusing on the guidelines set out in 'A Master's Guide to the UK Flag (Large Yacht Edition 3)', released by the UK DfT Maritime and Coastguard Agency.  

This course aims to allow the learner to train themselves in vital regulation and procedures in the most efficient way possible - by studying each of the 14 subjects in this course, with learning consolidated via confirmation and assessment questions. 

Starting a new life as a student in a new and different city or country is very exciting, and while most students will have a perfectly safe and crime-free experience, it is a fact that one third of students will be a victim of crime of one sort or another during their time at college or university. The most common crimes are theft and robbery, followed by incidents involving violent physical or sexual assault. Statistics show that an estimated 20 per cent of student robberies/muggings occur in the first six weeks of the academic year, when students are distracted with settling in.  

By far the best defence is to always use common sense and awareness when in any situation, therefore this course aims to instill in the candidate an awareness that will keep them, their property, and the people around them, safe. The knowledge and preparation gained from this course can help a student to navigate their way confidently into their new life and dramatically reduce the probability of becoming a victim of crime.

Research shows that 1 in 4 people will suffer from a mental health condition at some point in their lives, and 1 in 6 will experience mental health problems in the workplace. In fact, work pressures are commonly cited as being the number one contributor to stress. Mental health problems are often covered up through fear of discrimination, and a culture of fear and silence can make things very much worse - and be extremely costly for employers. Awareness of First Aid for Mental Health: Level 1 is a 100% online training course designed to raise awareness of mental health issues and help the learner to spot symptoms in themselves or others.

Early intervention can make a huge difference, and this course helps the learner to understand the different types of problems that exist, what the symptoms may be, and what the best steps are to begin helping the individual onto the road of healing. This level 1 qualification is targeted to people in an organisation who may not have a supervisory position, however they will still have a duty of care both towards themselves and towards their work colleagues. The course outlines how to spot the signs and symptoms of mental ill health and how to provide help on a first aid basis. Learners will not diagnose or treat mental health conditions because these can only be performed by professionals, but it will teach people to assist others by listening, reassuring, and responding.

Presentation

This training course provides a general introduction to ship machinery, details of diesel engines, a description of piping systems in ship's engine rooms and an overview of marine auxiliary machinery such as pumps, compressors, purifiers, heat exchangers, etc.

Objectives

On completion of the training, students will be able to:

Know the different types and arrangements of ship machinery applied for ship propulsion, understand the main parameters of ship machinery and the basic propulsion power transmission principles, and know the conceptual requirements for reliable and safe work of ship propulsion.

Know the main parts of marine diesel engines and understand their functions, get familiar with the most common problems involving engine parts, and understand the basic requirements for the reliable and safe operation of diesel engines.

Know the different types of piping systems in the ships engine room, understand the purpose and the basic arrangement of systems.

Know the different types of auxiliary machinery found on board ships, understand their working principles and the basic requirements for reliable and safe work of auxiliary machinery.

Program

Module 1 – Ship Machinery

Overview of the different propulsion types: Low-speed diesel engine layout, medium-speed diesel engine layout, steam propulsion with HP and LP steam turbines, gas turbines propulsion, diesel-electric propulsion, combined layouts, dual fuel engines, nuclear propulsion plants

Diesel engines outline

High pressure and low-pressure steam turbines 

Gas turbine cycles

Module 2 – Engine Details

Cylinder heads

Cylinder liners

Pistons

Crosshead and connecting rods

Bearings

Crankshaft

Engine casing

Turbocharger

Module 3 – Engine Room Systems

Seawater system

Freshwater system

Fuel oil system

Lubricating oil system

Compressed air system

Exhaust system

Module 4 – Marine Auxiliary Machinery

Pumps: Centrifugal pumps, positive displacement pumps, reciprocating pumps

Separators

Heat exchangers

Air compressors and air receivers

Steering gear

Reduction gears

Shaft generator

Thrust bearing

Controllable pitch propeller

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Marine Engineering Fundamentals, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Marine Engineering Fundamentals is obtained after completing the course and passing the online test.

Presentation 

This training course describes the inclining test and lightweight measurement procedures. Inclining test is a test performed on a ship to determine her stability, lightship weight and the coordinates of her centre of gravity. The test is applied to newly constructed ships greater than 24 metres in length, and to ships altered in ways that could affect stability.

Objectives 

On completion of the training, students will be able to: 

Get familiar with the stability of vessels at sea. 

Know the forces involved in the movement of ships. 

Know the types of inclination and equilibrium. 

Understand how and when to perform an inclining test or lightweight check. 

Know the precautions to be taken to perform or witness such tests

Program

Intact stability 

o Introduction to stability and trim 

o Transverse intact stability 

o Characteristics of GM 

o Free surface effect 

o Trim and stability booklet 

Inclining experiment 

o Test description 

o The general condition of the ship 

o Inclining weights 

o Pendulums 

o Means of communication 

o Documentation 

o Inclining test procedures 

o Acceptance and exemptions 

Lightweight measurement 

o Test description 

o Lightweight measurement procedures 

Precautions to be taken to perform or witness these tests

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

o Certificate of Inclining Test and Lightweight Measurement awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Inclining Test and Lightweight Measurement, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination. 

Presentation

This training course provides an overview of the Radiographic Testing (RT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of radiographic testing.

Know the testing procedure and the inspection process referred to the equipment and films used.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of reference accessories to ensure the image quality and the quality of test performance in general.

Program

History

Basic principle

o Radiation

o Films

o Radiographic image quality

Equipment and testing materials

o Radiation sources

o Film systems

o Image quality indicators

o Film viewing equipment

Testing procedure

o Selection of testing parameters

o Test arrangements

o Film processing

o Film evaluation

Applications and acceptance criteria

o Scope

o Weld inspection

o Indications

o Acceptance criteria

o Test report

Reliability, quality of test results

o Test performance

o Film viewing

o Film examination

o NDT personnel competence

o Safety aspects

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Radiographic Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Radiographic Testing is obtained after completion of the course and passing the online test.

Presentation

This training course covers the requirements of SOLAS Convention concerning the safety equipment of cargo ships. It includes the documentation required on board, life-saving appliances, firefighting equipment, the safety of navigation, safety equipment in general and additional requirements for tankers.

Objectives

On completion of the training, students will be able to:

Know the documentation required to be available on board and understand the requirements of the STCW Convention for safe manning crew members. 

Understand the requirements concerning personal life-saving appliances, survival crafts, rescue boats, and launching and recovery arrangements.

Understand the requirements for fire protection, fire detection and fire extinguishing systems, and get familiar with the specific requirements for the carriage of dangerous goods.

Know what are the navigational equipment and appliances required to ensure the safety of navigation and get familiar with other safety equipment required on board.

Understand the additional requirements applicable for tankers and get familiar with inert gas systems

Program

Module 1 – Documentation on Board

Module 2 – Life-Saving Appliances

Module 3 – Fire Fighting Equipment

Module 4 – Safety of Navigation

Module 5 – Safety in General

Module 6 – Additional Requirements for Tankers

Certificate

On completion of the training program, the student will be awarded:

A Certificate of SOLAS Safety Equipment, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of SOLAS Safety Equipment is obtained after completing the course and passing the online test.

The global threat of kidnap and extortion is a cause of concern for governments, law enforcement agencies and communities around the world. Many international businesses adhere to the 'duty of care' principle by providing their employees who travel regularly on business with anti-kidnap awareness training such as our CPD Approved, online Anti-Kidnap Awareness Training (AKAT) Course. This assists in the risk mitigation of a kidnap-type event by providing the learner with an in-depth insight into the levels of awareness required to maintain a 'safe environment'.

The Anti-Kidnap Awareness Training eLearning Course is aimed at those persons who either work- or live-in environments where the threat of abduction is high or are potential targets of such acts. 

This course has been written by subject matter experts hailing from UK Elite Military Units, highly experienced at operating in high-risk environments for Private Security & Private Military Companies (PSC & PMC). 

It is important that a ship can demonstrate compliance with the ISPS Code through the provision of an International Ship Security Certificate (ISSC), or in circumstances where there is an obvious security failing; otherwise, difficulties may be experienced at ports of call-in relation to the Port State Control Authorities. For this reason, this course is intended to align UK flagged cargo ships with the UK Department for Transport Maritime Security (formerly TRANSEC) with UK flagged passenger ships and port facilities, and to help in the generation of practical and sustainable regimes that balance the security of the ship with the wellbeing of the crew.

The course conforms to CSSI guidelines provided by the UK Department for Transport Maritime & Coastguard Agency (MCA), which specifies the baseline protective security measures to be taken by ships at all ports around the world and at each of the Security Levels, and aims to ensure consistent, proportionate, and practical measures are in place.

The UK Department for Transport (formerly TRANSEC) and The Maritime and Coastguard Agency (MCA) have responsibility to ensure the safety of port facility and cargo/freight & passenger ship security, within a policy framework demanded by international maritime legislation and codes outlined in SOLAS Chapter X1-2 and the International Ship and Port Facility Security (ISPS) Code.

This applies to the following types of ships engaged on international voyages:

• Passenger ships, including high-speed craft.

• Cargo ships, including high-speed craft, of 500 gross tonnage and upwards.

• Mobile offshore drilling units as defined in Regulation XI-2/1.1.5. (SOLAS)

The course can be used as an intrinsic part of an organisation's overall risk management and has been created to advise and educate senior personnel, senior officers, and specific security personnel in the application of security measures contained in UK Flagged Cargo Ship Security Plans (SSPs) at the different Security Levels.

Just about everyone knows that young people just love to travel. It is a means of expressing themselves, discovering who they are, and a fantastic means of exposing them to different cultures, societies, and ways of life. It is also common knowledge that there are, and always will be inherent risks that accompany young people whilst they are travelling away from the security of family and home. For example, in Australia, more than 38,000 people go missing each year. Whilst most of these are located within a short time period, there remain as many as 2,600 missing for more than 3 months.

The Online Travel Security Awareness for Students & Young People Overseas Course has been specifically written for young people travelling or working overseas during gap years, student exchange programmes, working with NGO's and Charities or simply backpacking around the world. 

The course covers most areas that need to be considered in order to assist in the mitigation of the risk of a security-related incident. The course also covers topics relevant to safety issues, including emergency response planning and measures. Learners should understand that this course cannot guarantee you a risk-free experience, but it will build on your current personal security knowledge and risk mitigation skills.

Worldwide incidents of Cyber Attack on shipping are rising dramatically every year, and vessel vulnerability to these attacks is also on the increase - as systems become more and more automated and connected. Whether carrying cargo, passengers or vehicles, ships are becoming more dependent on the use of digital and communications technologies throughout their operational lifespans. As shipping systems become more and more complex, so does their vulnerability to attacks from cyber criminals, who have demonstrated the ability to penetrate the systems used by the maritime industry, with potentially disastrous consequences to life, property, and the environment.

The ‘Cyber Security Awareness for Vessels' course examines the Cyber Security threats that exist, both generally and specifically within the maritime environment. The course examines the weaknesses that there may be in ship IT and OT systems, and how they may be exploited - and then goes on to look at the measures that can be taken to mitigate and defend against these types of threats.

Attacks against Non-Governmental Organisations (NGOs) in high-risk conflict zones have increased exponentially over the last two decades. NGOs increasingly work in the field, providing humanitarian relief and development assistance in countries around the world. As they carry out their work, they face many serious problems. Governments or rebel groups deny them access to those in need, corrupt officials or warlords demand payoffs, and local violence threatens the safety and even the lives of field personnel.

Presentation

This training course provides a general introduction to materials and their basic properties. It includes an overview of metallic and non-metallic materials used in modern shipbuilding.

Objectives

On completion of the training, students will be able to:

Understand the importance of materials’ properties for shipbuilding, know the basic mechanical properties of materials and the testing procedures, be familiar with the concept of tribology, and know the two most common types of wear.

Know the main groups of steels used in shipbuilding, their main properties and places of application, and understand the difference between steel and cast iron.

Know the composition, properties and places of application of aluminium and copper alloys in shipbuilding.

Get familiar with the synthesis, structure and properties of polymers; know the most common types of polymers used and their place of application.

Understand the role of matrix and reinforcement phase in the structure of composites and know the fabrication methods of composite parts.

Program

Module 1 - Basic Material Properties

History

Structural components and materials of modern vessels

Basic material properties

Mechanical properties of materials
o Tensile test
o Toughness
o Fatigue
o Creep
o Hardness

Tribological properties of materials
o Friction
o Wear

Module 2 - Metallic Materials used in Shipbuilding

Classification of metallic materials

Steels
o Normal strength steels
o Higher-strength steels
o Steels for boilers and pressure vessels
o Ferritic steels for low-temperature service
o Stainless steels
o Steel forgings
o Steel castings

Cast iron

Aluminium and its alloys
o Classification
o Heat treatment
o Wrought aluminium alloys
o Cast aluminium alloys

Copper and its alloys
o Classification
o Brass (Copper-Zinc alloys)
o Bronzes
o Copper-Nickel alloys

Module 3 - Plastic and Composites used in Shipbuilding

Polymers (plastics)
o Classification
o Application in marine engineering

Composites
o Composition
o Classification
o Polymer matrix composites
o Processing of fibre-reinforced composites
o Structural composites

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Materials in Shipbuilding, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Materials in Shipbuilding is obtained after completion of the course and passing the online test.

Presentation 

This training course provides a general introduction to Naval Architecture, the art and science of building ships. 

Objectives

On completion of the training, students will be able to: 

Understand the ship design process and the main terms and definitions used, including the lines plan, the form coefficients used in ship design, and the area and volume properties. 

Know the basic concepts of intact and damage stability. 

Get familiar with the main aspects of marine hydrodynamics acting on ship resistance, propulsion and seakeeping. 

Understand the basic principles of ship structures, structural design, scantling determination and typical structural arrangements of different ship types. 

Know the most common failure modes and structural defects. 

Get familiar with shipbuilding technology processes, materials used and shipyard layout 

Program 

Module 1 – Ship Geometry

Module 2 – Ship Stability and Trim

Module 3 – Damage Stability

Module 4 - Load Lines

Module 5 – Ship Resistance, Propulsion and Seakeeping

Module 6 – Introduction to Ship Structures

Module 7 – Structural Arrangement of Different Ship Types

Module 8 – Structural Design, Analysis and Classification Rules

Module 9 – Failure Modes and Structural Defects

Module 10 – Introduction to Shipbuilding

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to Naval Architecture awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to Naval Architecture, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

It is important that a ship can demonstrate compliance with the ISPS Code through the provision of an International Ship Security Certificate (ISSC), or in circumstances where there is an obvious security failing; otherwise, difficulties may be experienced at ports of call-in relation to the Port State Control Authorities. For this reason, this course is intended to align UK flagged cargo ships with the UK Department for Transport Maritime Security (formerly TRANSEC) with UK flagged passenger ships and port facilities, and to help in the generation of practical and sustainable regimes that balance the security of the ship with the wellbeing of the crew.

The course conforms to CSSI guidelines provided by the UK Department for Transport Maritime & Coastguard Agency (MCA), which specifies the baseline protective security measures to be taken by ships at all ports around the world and at each of the Security Levels, and aims to ensure consistent, proportionate, and practical measures are in place.

The UK Department for Transport (formerly TRANSEC) and The Maritime and Coastguard Agency (MCA) have responsibility to ensure the safety of port facility and cargo/freight & passenger ship security, within a policy framework demanded by international maritime legislation and codes outlined in SOLAS Chapter X1-2 and the International Ship and Port Facility Security (ISPS) Code.

This applies to the following types of ships engaged on international voyages:

• Passenger ships, including high-speed craft.

• Cargo ships, including high-speed craft, of 500 gross tonnage and upwards.

• Mobile offshore drilling units as defined in Regulation XI-2/1.1.5. (SOLAS)

Presentation

This training course provides an overview of the IACS Recommendation 47 – Shipbuilding and Repair Quality Standards.

Objectives

On completion of the training, students will be able to:

Understand the applicability of IACS Recommendation No.47.

Get familiar with materials, welding and non-destructive testing. 

Understand the quality standards for steel ship construction and remedial standards for new buildings. 

Understand the quality standards for repair of ships in operation.

Program

General requirements for new constructions and repair of ships in operation

Qualification of welders, welding procedures and NDT operators

Materials

Equivalency of material grades

Surface conditions and acceptance criteria

Shipbuilding and remedial quality standards for new constructions

o Standard for flanged longitudinals and flanged brackets

o Standard for corrugated bulkheads

o Standard for pillars, brackets and stiffeners

o Standard for hull shape

o Standard for fairness of plating between frames

o Standard for alignment and remedial standard for misalignment

o Standard for butt weld plate edge preparation and remedial standard

o Standard for fillet weld plate edge preparation and remedial standard

o Standard for distance between welds

Repair quality standards for ships in operation

o Standard for welding, groove roughness

o Standard for renewal of plates

o Standard for doublers on plating

o Standard for renewal of internals/stiffeners

o Standard for welding of pitting corrosion

o Standard for welding repair of cracks

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Shipbuilding and Repair Quality Standards, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Shipbuilding and Repair Quality Standards is obtained after completion of the course and passing the online test.

Presentation

This training course gives a general presentation of the three Advanced NDT Methods (Time-of-Flight Diffraction (TOFD), Phased Array Ultrasonic (PAUT) and Digital Radiography (DR)), their basic principles and how the corresponding equipment should be used in accordance with the testing procedure to ensure the quality of the test performance and testing results.

Objectives

On completion of the training, students will be able to:

Understand the setup and principles of advanced NDT techniques in comparison with conventional methods.

Know the testing procedure and the inspection process referred to the equipment used.

Differentiate applications according to the advantages and limitations.

Get familiar with the aspects of test performance and obtained testing results.

Program

Time-of-flight diffraction (TOFD)

o Basic principle

o Testing procedure

o System set-up and checks

o Data interpretation and evaluation

o Acceptance levels

o Advantages and limitations

Phased Array Ultrasonic Technique (PA-UT)

o Ultrasonic phased array technology

o Phased array benefits

o Basic principle

o Testing procedure

o Settings

o PA-UT instead of RT

o Advantages and limitations

Digital Radiography (DR)

o Digital radiography techniques

o Computed radiography & direct digital radiography

o Digital image quality

o Basic principles

o Testing procedure

o Evaluation and interpretation of results

o Advantages and limitations

Applications and acceptance criteria

o Scope

o Indication evaluation

o Acceptance criteria

o Test report

Reliability, quality of test results

o UT system performance

o NDT personnel competence

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Advanced Techniques, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Advanced Techniques is obtained after completion of the course and passing the online test.

Presentation

This training course aims at providing an overview of the shipping community, the main players intervening on a ship and the different roles they play. It provides general information about ship owners and managers, flag administrations, classification societies, insurance companies, port state control, operational players and specialized press.

Objectives

On completion of the training, students will be able to:

Discover the different actors and organisms related with shipping

Know the relationship between the various shipping actors

Understand the role of the different shipping actors

Program

Overview of the major shipping players

Ship Owners

Categories of ship owners

Ship managers

Professional associations

BIMCO

ICS

INTERTANKO

INTERCARGO

CLIA

SIGTTO

IMCA

Flag

General

International Maritime Organization (IMO)

International Labour Organization (ILO)

European Maritime Safety Agency (EMSA)

United States Coast Guard (USCG)

Classification

Classification Societies

International Association of Classification Societies (IACS)

Insurance

Underwriters

Protection & Indemnity (P&I) Clubs

Operational players

Crew

Chartering

Ports

Agents

Maintenance

Port State Control (PSC)

PSC and PSCO

Equasis

Media

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Shipping, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Shipping is obtained after completion of the course and passing the online test.