Course catalogue

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness and understanding of the legislation for safe use of equipment in explosive atmospheres.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide information on the European Directives that set the standard for equipment that is to be used in explosive atmospheres (ATEX).

How will this course benefit my company?

By ensuring you have information on the European Directives that set the standard for equipment that is to be used in explosive atmospheres (ATEX).

What standards are referred to in this course?

Dangerous Substances and Explosive Atmospheres Regulations of 2002 (DSEAR)

Directive 99/92/EC, (also known as 'ATEX 137' or the 'ATEX Workplace Directive')

Directive 94/9/EC, (also known as 'ATEX 95' or the ‘ATEX Equipment Directive')

Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations of 1996

Is there an assessment?

Yes

Who is the course for?

This course is for any person who interacts with, or is responsible for, the specification, design, operation and maintenance of assets that employ safety instrumented systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an awareness of the purpose and nature of safety systems deployed to protect people, the environment and plant in the areas that you work.

How will the course benefit my company?

By ensuring personnel have an understanding of safety instrumented systems.

What standards are referenced in the course?

IEC 61508

IEC 61511

IEC 62061

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an introduction to Gas Compression.

The course has seven modules:

Module 1: Introduction to Gas Compression

Module 2: Gas Compression Systems

Module 3: Gas Compressors and their Principles

Module 4: Gas Compressors and their Components

Module 5: Gas Compression Systems: Controlling Surge

Module 6: Gas Compression Systems: Start-up and Shutdown

Module 7: Gas Compression Systems: Innovation

How will this course benefit my company?

To ensure you have had an introduction to Gas Compression.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.This course has seven modules:

Who is this course for?

For all personnel who are involved in working with gas turbines.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to gas turbines and how they are designed and operated.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of gas turbines and how they are designed and operated.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians.

Is previous experience required?

No previous experience is required to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

By providing you with an overview of potable water systems.

How will this course benefit my company?

This course aims to provide personnel with an overview of potable water systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations. 

Who is this course for?

Personnel requiring an awareness or understanding of flare systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides an overview of flare systems.

How will this course benefit my company?

By ensuring you have an overview of flare systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of upstream oil and gas operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of upstream oil and gas operations.

How will this course benefit my company?

By ensuring you have an overview of the process of upstream oil and gas operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide an introduction to the decommissioning process and an overview of the regulations governing decommissioning on the United Kingdom Continental Shelf (UKCS).

Who is the course for?

All relevant personnel

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives:

LO1 Give an overview of the history of oil and gas production on the United Kingdom Continental Shelf (UKCS)

LO2 Explain why decommissioning activity is increasing on the UKCS

LO3 Describe what is meant by ‘decommissioning’

LO4 Explain the scope of decommissioning on the UKCS

LO5 Provide an overview of relevant decommissioning legislation and regulations

LO6 Explain the impact of the Brent Spar incident on decommissioning regulation

LO7 Provide an overview of the OSPAR Decision 98/3

LO8 Identify the different phases of the decommissioning lifecycle

LO9 Provide a basic overview of well plugging and abandonment 

LO10 Provide an overview of the different methods of decommissioning

LO11 Provide examples of decommissioning projects on the UKCS

LO12 Give examples of the types of hazards which may be encountered during decommissioning

Who is this course for?

All relevant personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of Oil and Gas metering, Sampling and Pigging

This course contains seven modules:

Module 1: Introduction to Metering

Module 2: Gas Metering Principles of Flow Measurement

Module 3: Gas Metering

Module 4: Oil Metering

Module 5: Metering Operations

Module 6: Sampling Systems

Module 7: Pigging

How will this course benefit my company?

To ensure you have an overview of Oil and Gas metering, Sampling and Pigging

What standards are referred to in this course?

The course is made according to industry best practice. 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with an overview of the safety precautions to be taken when working on electrical equipment

How will this course benefit my company?

By ensuring you have an overview of the safety precautions to be taken when working on electrical equipment

What standards are referred to in this course?

Health and Safety at Work Act (1974)

Electricity at Work Regulations (1989)

Management of Health and Safety at Work Regulations (1999)

Electricity at Work Safe Working Practices (2003)

Offshore Electricity and Noise Regulations (1997) 

Provision and Use of Work Equipment Regulations (1998)

BS 7671: 2008 Requirements for Electrical Installations

Offshore Installations (Safety Case) Regulations 2005 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%

Who is this course for?

Personnel who work with pumps in the Oil & Gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the various types of pumps used in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel who work with pumps have an overview of each type and how they work.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of wireline equipment and its operation.

How will this course benefit my company?

To ensure you have an overview of wireline equipment and its operation.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims toprovide learners with an overview of industry best practice associated with pressure vessel inspection

Learning Objectives:

LO1 Define what is meant by a ‘pressure vessel’

LO2 Give examples of pressure vessels

LO3 Identify the factors that can cause pressure vessel incidents

LO4 Identify the hazards posed by pressure vessel failure

LO5 Explain the requirements for inspections to be carried out by a competent person

LO6 Explain the requirements for a written scheme of examination

LO7 Describe how to carry out internal and external pressure vessel inspection

LO8 Describe how to carry out pressure pipework inspection

LO9 Explain the importance of carrying out regular pressure testing

LO10 Describe the control measures that are required to limit the risk posed by pressure vessels

Who is this course for?

Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of coiled tubing equipment and its operation.

How will this course benefit my company?

To ensure you have an overview of coiled tubing equipment and its operation.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require an awareness and understanding of methods of oil and gas recovery.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to oil and gas recovery methods

How will this course benefit my company?

By ensuring you are introduced to the various ways oil and gas are recovered from the well.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All trainee Maritime personnel working with fuel systems.

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

By providing you with an overview of fuel systems.

How will the course benefit my company?

By providing personnel with an overview of fuel systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Personnel who require an awareness and understanding of various water injection methods.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand water injection. 

This course contains nine modules:

Module 1: Introduction to Water Injection

Module 2: Reservoirs and Rock Properties

Module 3: Waterflooding

Module 4: Injection Water Impurities

Module 5: Water Treatment

Module 6: Water Injection Systems

Module 7: Water Quality Monitoring

Module 8: Well Design and Construction

Module 9: Operation of the Water Injection System

How will this course benefit my company?

To ensure you have the knowledge required to understand water injection.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

You will be introduced to the purpose of separation.

This course contains ten modules:

Module 1: The Purpose of Separation

Module 2: Reservoir Fluids

Module 3: The Principles of Separation

Module 4: Separator Types

Module 5: Separator Construction

Module 6: Multi-stage Separation

Module 7: Separator Control

Module 8: Separator Operation

Module 9: Problems Associated with Separators

Module 10: New Separation Technology

How will this course benefit my company?

Ensure you are introduced to separation.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.