Course catalogue

Course Goal:  This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives

LO1 Outline the extent of the problem of slips, trips and falls at work

LO2 Identify the causes of slips, trips and falls

LO3 Describe the importance of following regulatory requirements to help reduce the risk of slips, trips and falls occurring

LO4 Explain the duties of employers in preventing slips, trips and falls in the workplace

LO5 Explain the hierarchy of controls in preventing, and reducing, the risk of slips

LO6 Explain the actions that can be taken to prevent and reduce the risk of trips

LO7 Explain the responsibilities of employees in preventing slips, trips and falls

Who is the course for?

Personnel requiring an awareness or understanding of lubrication systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course aims to introduce learners to the role of lubrication systems in maintaining mechanical equipment.

How will the course benefit my company?

By ensuring you are introduced to the role of lubrication systems in maintaining mechanical equipment.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who require an overview of the steps involved in the process of disconnecting flowlines.

Is previous experience required?

You do not require previous experience to complete this course.

How will the course benefit me?

By providing you with an overview of the steps involved in the process and disconnecting flowlines and the associated safety controls.

How will the course benefit my company?

By ensuring personnel are aware of the hazards posed by disconnecting flowlines and the steps that should be followed to ensure that the work is carried out safely.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require awareness or understanding of safety measures to take when using grinding equipment.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide personnel with an overview of industry best practice in relation to the safe use of grinding equipment

How will this course benefit my company?

By ensuring you have an overview of the use of industry best practice in relation to the safe use of grinding equipment

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

Personnel requiring awareness or understanding of subsea control systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of subsea control systems and has the following sections:

Section 1: Evolution of Subsea Technology

Section 2: Subsea Completions Layout

Section 3: Subsea Control Systems

Section 4: Subsea Process Control

Section 5: Subsea Technology Development

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to Subsea Control Systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel who work in a role that may put them at risk of a hand or body injury.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an introduction on how to prevent hand and body injuries in the workplace.

How will the course benefit my company?

This course to ensure personnel have the knowledge of how to protect their hands and body from injury in the workplace, by following safety measures and understanding procedures.

What standards are referenced in the course?

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Production Operators and Trainee Instrument Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of process control systems.

This course has 7 sections:

Section 1: Open and Closed Loops

Section 2: Process Control Hardware

Section 3: Process Control Lag

Section 4: Control Modes

Section 5: Fault Finding Techniques

Section 6: Distributed Control Systems

Section 7: SIS and Cause and Effects

How will this course benefit my company?

To ensure you have an overview of process control systems.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of turbo expanders.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides an overview of the principles of turbo expansion.

How will this course benefit my company?

By ensuring you have an overview of the principles of turbo expansion.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide an overview of seawater systems.

Who is this course for?

Trainee Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of seawater systems.

How will this course benefit my company?

To ensure you have an overview of seawater systems.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The VIRSEC Maritime English Test for Engine Ratings is designed to assist ship operators and employers make recruiting decisions by assessing the English language competency of Seafarers at a Engine Rating position working on board any vessel.

The Test is designed around the approved guidelines for Maritime English developed by the IMO. These guidelines are combined with internationally recognised methods for English language testing to form a rigorous and accurate testing system.

Regulations:

The English Tests are designed from the ground up using approved guidelines from the International Maritime Organisation (IMO Model English course 3.17); IMO Standard Marine Communication Phrases (SMCPs); and consistent with the framework set out by the Standards of Training, Certification and Watchkeeping.

Why Take This Test With VIRSEC:

What makes VIRSEC different from the others? Below are some of the benefits of taking this online Test with VIRSEC:

• CPD Accredited Online Test
• Randomised Questioning
• Adheres to International Standards
• Position-Focused Questions
• Assesses 5 Primary Language Skills

Test Duration:

The user must attempt the Test in 90 minutes, and in one sitting. If a candidate does not complete the exam within the duration, they will fail any unanswered questions.

Course Goal: This course aims to provide an overview of industry best practice for working on small bore tubing systems.

Target Audience: All relevant personnel involved in the design, construction and maintenance of small bore tubing systems.

Learning Objectives

Section 1: Introduction to Small Bore Tubing Systems

LO1 Describe the importance of small bore tubing systems

LO2 Explain the importance of hazard management

LO3 Identify the importance of ‘standardisation’

Section 2: Principles of Compression Fittings

LO4 Identify different types of compression fittings and explain their function

LO5 Describe the different components of fittings and the principles of compression fitting sealing

LO6 Explain the considerations to be taken into account when selecting fitting components

LO7 Explain the importance of deformation

Section 3: System Preparation

LO8 Describe the process for preparing compression joints

LO9 Explain the process of tube cutting and the considerations that should be taken into account

LO10 Explain how to secure the nut of a compression fitting

LO11 Explain when and where an inspection gauge should be used

LO12 Explain the use and selection of suitable thread sealant

LO13 Explain why leak and pressure testing must be carried out

LO14 Describe the different thread types that can be encountered

LO15 Outline the differences between parallel and tapered threads

Section 4: Identification of Tubing and Compression Systems

LO16 Explain the importance of not mixing types and brands of fittings

Section 5: Hazards

LO17 Identify the common problems and issues encountered in small bore tubing systems

LO18 Describe how tube bending is carried out

LO19 Identify the requirements for adequate straight length adjacent to the fitting

LO20 Identify what determines the number of fittings in a system

LO21 Describe the causes and effects of vibration

LO22 Identify the considerations involved where there are components frequently installed and removed in a system

LO23 Describe the procedures and practices that must be followed when reinstating a small bore tubing system back to its original condition

Section 6: Correct Selection and Assembly Techniques

LO24 Explain how to select the correct components

LO25 Describe the checks that should be made during an installation

LO26 Describe the best practice that must be followed for working with compression fittings and small bore tubing systems

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This FAST TRACK course contains the following sections:

Section 1: An Introduction to Mechanical Joint Integrity
Section 2: Principles of Hand Torquing
Section 3: Principles of Hydraulic Tensioning
Section 4: Principles of Controlling Tightening
 

Who is this course for?
Process Operators

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an awareness of how wax may be formed and controlled and the effects that it can have on pipeline flow. The course examines what wax is and how it is formed. It discusses flow assurance, details the risks of pipeline plugging by wax, and outlines the various methods of controlling wax formation.

How will this course benefit my company?
By ensuring you are aware of how wax may be formed and controlled and the effects that it can have on pipeline flow.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Provided in association with Astutis, approved centre 1857.

IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams.

It enables organizations to demonstrate a commitment to health and safety standards by ensuring managers and supervisors are aware of their responsibilities and the positive actions they can take to ensure a safe a healthy working environment.

On completion of the course, learners will be able to:

• Understand your responsibilities for safety in the workplace.

• Recognise common workplace hazards and implement appropriate control measures.

• Estimate, evaluate and reduce risk by applying a hierarchy of risk control.

• Undertake structured risk assessments and accident investigations.

• Understand the requirements of HSE legislation.

• Recognise different ways to measure and improve health and safety performance.

Course Goal:This course aims to provide an overview of the principles of well completion and pressure control

Target Audience:Trainee Drilling Personnel

Who is this course for?

Personnel requiring an awareness or understanding of (Material) Safety Data Sheets ((M)SDS) for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the structure and information contained in Safety Data Sheets.

How will this course benefit my company?

By ensuring you have an overview of Safety Data Sheets and how your role may require to understand certain information contained in the sheets.

What standards are referred to in this course?

Chemicals (Hazard Information and Packaging for Supply) Regulations 2009

CLP Regulation

REACH Regulation

Control of Substances Hazardous to Health (CoSHH) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

The VIRSEC Maritime English Test for Junior Engine Officers is designed to assist ship operators and employers make recruiting decisions by assessing the English language competency of Seafarers at a Junior Officer position working on board any vessel.

The Test is designed around the approved guidelines for Maritime English developed by the IMO. These guidelines are combined with internationally recognised methods for English language testing to form a rigorous and accurate testing system.

Regulations:

The English Tests are designed from the ground up using approved guidelines from the International Maritime Organisation (IMO Model English course 3.17); IMO Standard Marine Communication Phrases (SMCPs); and consistent with the framework set out by the Standards of Training, Certification and Watchkeeping.

Why Take This Test With VIRSEC:

What makes VIRSEC different from the others? Below are some of the benefits of taking this online Test with VIRSEC:

• CPD Accreditated Online Test
• Randomised Questioning
• Adheres to International Standards
• Position-Focused Questions
• Assesses 5 Primary Language Skills

Test Duration:

The user must attempt the Test in 90 minutes, and in one sitting. If a candidate does not complete the exam within the duration, they will fail any unanswered questions.

It has become increasingly clear that social media is not just a fad. It is instead, not only a massive change in the way we socialize with others in a personal setting, but also the biggest shift in how we conduct business since the arrival of the Internet. Social media is quickly altering every aspect of corporate operations, such as hiring practices, training, marketing, and even risk management.   The purpose of this course is to introduce you to social media, explore how we use social media personally vs. social media use in a business setting, how its use continues to evolve in the workplace, the benefits of social media, and of course the risks it can present to you personally and to companies.

Course Goal: This course aims to provide an overview of safety during drilling operations

Target Audience: Drilling Personnel

Section 1: General Safety

Section 2: Safety on the Pipe Deck

Section 3: Safety on the Drill Floor

Section 4: Safety on the Derrick

Section 5: Safety in the Shale Shakers and Mud Pits

Section 6: Safety in the Power Generation Module

Section 7: Safety in the Mud Pump Module

Section 8: Pressure Testing Safety

Section 9: Safety in the Sack Store

Section 10: Safe Chemical Use

Who is this course for?

Personnel in oil and gas operations or technical roles.

Is previous experience required?

It is recommended you have completed the principles of well control course prior to undertaking this course.

How will this course benefit me?

This course aims to provide an overview of snubbing.

How will this course benefit my company?

By ensuring your personnel have an overview of snubbing operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.