Oil and Gas

Course catalogue

Category

Reset
  • Asset Integrity

Course type

Course provider

hits
13
Course code: MUK-019
Course type: E-learning course
Duration: 1 hour
Language: English
Price: GBP 80,-

Course goal: This course aims to provide the knowledge and techniques for carrying out pressure testing and leak testing in the workplace

Target Audience: Production Operators

Sections:


Section 1: Introduction to Pressure and Leak Testing

Section 2: Leak Testing and Pressure Testing Methods and Associated Hazards

Section 3: Preparing a Leak Test

Section 4: Carrying out a Leak Test

Section 5: Test Pressure and Test Documentation

Course code: MUK-035
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English
Price: GBP 80,-

Course Goal: This course aims to provide an overview of industry best practice for working on small bore tubing systems

Target Audience: All relevant personnel involved in the design, construction and maintenance of small bore tubing systems

 

Learning Objectives

Section 1: Introduction to Small Bore Tubing Systems

 

Section 2: Principles of Compression Fittings

 

Section 3: System Preparation 

 

Section 4: Identification of Tubing and Compression Systems

 

Section 5: Hazards

 

Section 6: Support and Routing

 

Section 7: Routing, Support and Tubing Conditions 

 

Section 8: Identifying and Assessing High Risk Applications  

 

Section 9: Correct Selection and Assembly Techniques

 

Course code: MUK-034
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Course Goal: This course aims to provide an introduction to corrosion in the Oil and Gas Industry

 

Target Audience: All relevant personnel

 

Learning Objectives

 

LO1 Define what is meant by corrosion and explain why it poses a risk to the Oil and Gas Industry

LO2 Identify areas where corrosion is commonly found in oil and gas facilities

LO3 Identify the elements which are necessary for corrosion to occur

LO4 Identify the main corrodents found in oil and gas facilities and explain how these can cause corrosion

LO5 Identify different types of corrosion

LO6 Explain how corrosion can impact wells and flowlines

LO7 Explain how corrosion can impact plant and pipelines

LO8 Explain how corrosion can impact gas systems

LO9 Explain how corrosion can impact water systems

LO10 Explain how corrosion can impact deadleg areas

LO11 Identify areas where external corrosion is most prevalent

LO12 Describe corrosion control measures

LO13 Explain how to play your part in minimising corrosion

Course code: MUK-036
Course type: E-learning course
Duration: 2 hours
Language: English
Price: GBP 125,-

Course Goal: This course aims to provide learners with an introduction to the principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems. This course is intended to reflect industry ‘best practice’ for competence in relation to mechanical joint operations and applies to both the onshore and offshore Oil and Gas Industry.

 

Target Audience: This course is aimed at all personnel involved in mechanical joint operations, particularly those who are expected to undertake related duties in the workplace.

 

This course contains the following sections:

 

Section 1: An Introduction to Mechanical Joint Integrity

Section 2: Principles of Hand Torquing

Section 3: Principles of Hydraulic Tensioning

Section 4: Principles of Controlling Tightening

Course code: MUK-156
Course type: E-learning course
Duration: 1 hour
Language: English
Price: GBP 80,-

Course Goal: This course aims tointroduce learners to different types of flanges and gaskets and their functions

 

Target Audience: Operations personnel

 

Learning Objectives:

LO1 Explain the importance of ensuring mechanical joint integrity

LO2 Describe what is meant by ‘a mechanical joint’

LO3 Identify different types of flanges and flange connections

LO4 Outline the function and purpose of flanges

LO5 Identify the different types of gaskets

LO6 Explain the function and purpose of gaskets

LO7 Outline the factors to consider when selecting the most appropriate joint assembly

LO8 Identify the most common types of flange and gasket arrangements

LO9 Describe how to install flanges correctly

LO10 Explain what should be checked when installing gaskets

LO11 Describe the principles of hand torque tightening

LO12 Describe the principles of hydraulic tensioning

LO13 Explain the importance of controlling tightening and the main methods used

Course code: MUK-056
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Course goal: This course provides learners with an awareness of working with hazardous substances

Target Audience: This course is aimed at all personnel working in the Oil and Gas Industry.

Learning Objectives

LO1 Explain the legal obligations for both employees and employers
LO2 Explain the health effects of working with hazardous substances, and the various ways that these can enter the body
LO3 Explain the use of Material Safety Data Sheets, Labels and Assessments
LO4 Explain the common labelling system and identify the standard symbols
LO5 Explain the appropriate use of Personal Protective Equipment
LO6 Explain requirements for storage, handling and disposal of hazardous substances
LO7 Define the control measures for handling hazardous substances and explain the control hierarchy
LO8 Explain the process for dealing with hazardous substances in the event of a spill
LO9 Define the recording and reporting process

Course code: MUK-157
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: GBP 40,-

Course Goal: This course aims toprovide an overview of managing hydrocarbon releases

 

Target Audience: All relevant personnel

 

Learning Objectives:

 

LO1 Describe the history of the hydrocarbon release risk reduction process

LO2 Describe safety instrumented systems

LO3 Describe the introduction of control of work procedures

LO4 Describe isolation procedures

LO5 Describe fire and gas detection systems

LO6 Describe hydrocarbon release reporting

LO7 Describehow different hydrocarbon fluids behave on release and describe how hydrocarbon mixtures may undergo a phasechange

LO8 Explain the dangers of exposure to hydrogen sulphide (H2S) and identify the symptoms of H2S poisoning

LO9 Describe the range of leak rates that can occur with the different types of failure

Course code: MUK-035-FT
Course type: E-learning course
Duration: Not set
Language: English
Price: GBP 100,-

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This FAST TRACK course assesses Learning Objectives under the following sections:

Section 1: Introduction to Small Bore Tubing Systems
Section 2: Principles of Compression Fittings
Section 3: System Preparation
Section 4: Identification of Tubing and Compression Systems
Section 5: Hazards
Section 6: Correct Selection and Assembly Techniques

Course code: MUK-158
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: GBP 40,-

Course Goal: This course aims to introduce learners to the requirements for maintaining surface preparation

 

Target Audience: All relevant personnel

 

Learning Objectives:

 

LO1 Define what is meant by ‘surface preparation’

LO2 Explain the requirement for surface preparation

LO3 Identify the possible implications of removing corrosion from corroded equipment

LO4 Give an overview of different surface preparation methods

LO5 Describe the different inspection techniques available for monitoring surface preparation

LO6 Describe the control measures that should be considered when carrying out surface preparation

Course code: MUK-036-FT
Course type: E-learning course
Duration: Not set
Language: English
Price: GBP 125,-

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This FAST TRACK course contains the following sections:

Section 1: An Introduction to Mechanical Joint Integrity
Section 2: Principles of Hand Torquing
Section 3: Principles of Hydraulic Tensioning
Section 4: Principles of Controlling Tightening

Course code: MUK-034-FT
Course type: E-learning course
Duration: Not set
Language: English
Price: GBP 50,-

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This FAST TRACK course assesses the following Learning Objectives:

LO1 Define what is meant by corrosion and explain why it poses a risk to the Oil and Gas Industry
LO2 Identify areas where corrosion is commonly found in oil and gas facilities
LO3 Identify the elements which are necessary for corrosion to occur
LO4 Identify the main corrodents found in oil and gas facilities and explain how these can cause corrosion
LO5 Identify different types of corrosion
LO6 Explain how corrosion can impact wells and flowlines
LO7 Explain how corrosion can impact plant and pipelines
LO8 Explain how corrosion can impact gas systems
LO9 Explain how corrosion can impact water systems
LO10 Explain how corrosion can impact deadleg areas
LO11 Identify areas where external corrosion is most prevalent
LO12 Describe corrosion control measures
LO13 Explain how to play your part in minimising corrosion

Course code: MUK-035
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: Brazilian Portuguese
Price: GBP 80,-

Course Goal: This course aims to provide an overview of industry best practice for working on small bore tubing systems

 

Target Audience: All relevant personnel involved in the design, construction and maintenance of small bore tubing systems

 

Learning Objectives

 

Section 1: Introduction to Small Bore Tubing Systems

LO1 Describe the importance of small bore tubing systems

LO2 Explain the importance of hazard management

LO3 Identify the importance of ‘standardisation’

Section 2: Principles of Compression Fittings

LO4 Identify different types of compression fittings and explain their function

LO5 Describe the different components of fittings and the principles of compression fitting sealing

LO6 Explain the considerations to be taken into account when selecting fitting components

LO7 Explain the importance of deformation

Section 3: System Preparation

LO8 Describe the process for preparing compression joints

LO9 Explain the process of tube cutting and the considerations that should be taken into account

LO10 Explain how to secure the nut of a compression fitting

LO11 Explain when and where an inspection gauge should be used

LO12 Explain the use and selection of suitable thread sealant

LO13 Explain why leak and pressure testing must be carried out

LO14 Describe the different thread types that can be encountered

LO15 Outline the differences between parallel and tapered threads

Section 4: Identification of Tubing and Compression Systems

LO16 Explain the importance of not mixing types and brands of fittings

Section 5: Hazards

LO17 Identify the common problems and issues encountered in small bore tubing systems

LO18 Describe how tube bending is carried out

LO19 Identify the requirements for adequate straight length adjacent to the fitting

LO20 Identify what determines the number of fittings in a system

LO21 Describe the causes and effects of vibration

LO22 Identify the considerations involved where there are components frequently installed and removed in a system

LO23 Describe the procedures and practices that must be followed when reinstating a small bore tubing system back to its original condition

Section 6: Correct Selection and Assembly Techniques

LO24 Explain how to select the correct components

LO25 Describe the checks that should be made during an installation

LO26 Describe the best practice that must be followed for working with compression fittings and small bore tubing systems

Course code: MUK-157-FT
Course type: E-learning course
Duration: Not set
Language: English
Price: GBP 50,-

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.


Course Goal:

This course aims to provide an overview of managing hydrocarbon releases


This course covers the following learning objectives:

LO1 Describe the history of the hydrocarbon release risk reduction process

LO2 Describe safety instrumented systems

LO3 Describe the introduction of control of work procedures

LO4 Describe isolation procedures

LO5 Describe fire and gas detection systems

LO6 Describe hydrocarbon release reporting

LO7 Describe how different hydrocarbon fluids behave on release and describe how hydrocarbon mixtures may undergo a phase change

LO8 Explain the dangers of exposure to hydrogen sulphide (H2S) and identify the symptoms of H2S poisoning

LO9 Describe the range of leak rates that can occur with the different types of failure

Hits per page