Oil and Gas

Course catalogue

Category

Reset
  • US Best Practice

Course type

Course provider

hits
30
Course code: MUK-199
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal: 

This course aims to provide learners of an awareness of US best practice in relation to minimizing exposure to bloodborne pathogens in the workplace.

This course aims to provide you with an awareness of bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs. 

 

Learning Objectives:

 

LO1 Define what is meant by the term ‘bloodborne pathogens’

LO2 Identify the traits and symptoms of Hepatitis B

LO3  Identify the traits and symptoms of HIV 

LO4 Identify modes of transmission for bloodborne pathogens

LO5  Explain the purpose of an Exposure Control Plan

LO6 Give examples of preventive control measures that can reduce or eliminate exposure

LO7  Give an overview of the proper usage and handling of personal protective equipment

LO8  Describe decontamination best practice for blood and other potentially infectious materials

LO9  Describe the actions to take if an exposure incident occurs

LO10  Identify the measures to be taken if the skin or eyes are exposed to infectious material

Course code: MUK-207
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide an overview of US best practice in relation to the classification and labeling of chemicals.

 

Learning Objectives:

LO1 Give an overview of the purpose and goals of the OSHA requirements for the classification and labeling of chemicals

LO2 Explain physical, health, and environmental hazards

LO3 Give an overview of the information that may be contained on a chemical label

LO4 Identify the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) pictograms

LO5 Identify the differences between transport pictograms and GHS pictograms

LO6 Describe hazard statements, precautionary statements and signal words

LO7 Explain the purpose of Safety Data Sheets

LO8 Give an overview of the information that may be contained on a Safety Data Sheet

LO9 Identify that not all chemicals will have a Safety Data Sheet

 

Course code: MUK-200
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Course Goal: 

This course aims to give offshore and onshore personnel working in the US the knowledge required to understand the hazards and controls associated with working in an environment where they could be exposed to H2S.

 

Target Audience: 

All personnel who could potentially be exposed to H2S in the workplace 

 

Learning Objectives

 

LO1  Give an overview of the physical properties and sources of hydrogen sulfide

LO2 Identify the areas on an offshore installation or onshore facility where you would expect to encounter hydrogen sulfide

LO3 Explain the physiological effects of exposure to varying toxicity levels of hydrogen sulfide

LO4 Explain the responsibilities and duties of all personnel under current regulatory guidance (incident reporting and record keeping)

LO5 Explain the occupational exposure limits for hydrogen sulfide (OSHA PEL, ACGIH TLV-TWA, mentioned applicable State PEL)

LO6 Describe the different methods used for detecting hydrogen sulfide

LO7 Describe the various personal and respiratory protection equipment required for undertaking work in areas where hydrogen sulfide may be present (use, care, inspection)

LO8 Give an overview of typical control measures which may be required  

LO9 Explain the requirement for hydrogen sulfide contingency plans and emergency response

Course code: MUK-245
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide learners with an overview of US best practice in relation to incident reporting and investigation.

 

Learning Objectives:

LO1 Define what is meant by the terms ‘incident’, ‘accident’ and ‘near miss’ 

LO2 Explain the purpose of, and reasons for, incident reporting and investigation

LO3 Outline the key roles and responsibilities involved in reporting and investigating an incident

LO4 Explain how to determine the appropriate level of investigation using an incident severity risk assessment

LO5 Identify the key steps involved in a typical incident investigation process

LO6 Describe the requirement for analysis of the causes of the incident

LO7 Describe Root Cause Analysis (RCA)

LO8 Describe how to identify suitable control measures 

LO9 Describe the requirement for an incident action plan and its implementation using SMART principles

 

Course code: MUK-209
Course type: E-learning course
Duration: 1 hour
Language: English (US)
Price: GBP 80,-

Course Goal:

This course aims to increase the learner's awareness of US best practice in relation to Personal Protective Equipment (PPE), and outline the responsibilities of employers and personnel in relation to PPE.

 

Learning Objectives

 Section 1: The Importance of PPE

LO1 Define what is meant by Personal Protective Equipment (PPE)

LO2 Identify the regulations surrounding the use of PPE

LO3 Describe the Hierarchy of Control measures

LO4 Describe the duties and responsibilities of employers in relation to PPE

LO5 Explain the importance of PPE-related training, information and instruction 

LO6 Describe the responsibilities of personnel in relation to PPE

 

Section 2: Types of PPE

LO7 Identify the different types of PPE 

LO8 Describe how to select, use and maintain different types of PPE

 

Section 3: PPE Requirements

LO9 Identify different types of Respiratory Protective Equipment (RPE)

LO10 Explain the requirements for face fit testing

LO11 Explain the requirements for the use of fall protection

LO12 Explain the requirements for assessing the suitability and compatibility of PPE

LO13 Describe the four levels of PPE protection

LO14 Explain the importance of proper donning and doffing techniques

 

Course code: MUK-210
Course type: E-learning course
Duration: 35 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

 

Learning Objectives:

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

 

Course code: MTP-075
Course type: E-learning course
Duration: 40 Minutes
Language: English (US)
Price: GBP 40,-

This course aims to provide an overview of US best practice in relation to drug and alcohol awareness in the workplace.

This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs. It is designed to enable you to:

• Identify various types of common drugs

• Be familiar with drug and alcohol laws and regulations

• Find company policies on alcohol and controlled substances

• Explain the various methods of alcohol and drug testing routinely used in the workplace

 

Course code: MTP-073
Course type: E-learning course
Duration: 30 Minutes
Language: English (US)
Price: GBP 40,-

This course aims to provide learners with an awareness of US best practice in relation to the values that govern responsible corporate practice and personal behaviors in the workplace.

 

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

Course code: MTP-070
Course type: E-learning course
Duration: 18 minutes
Language: English (US)
Price: GBP 40,-

This course aims to provide learners with an awareness of US best practice in relation to marine trash and debris.

This course covers the topics:

Origins

Environmental and health effects

Common causes,

Law and regulations

Preventive measures.

Course code: MUK-219
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide personnel with an overview of US best practice in relation to working with hazardous energy and lockout/tagout procedures.

The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to define terms commonly used in a lockout/tagout program, describe specific lockout/tagout techniques commonly used in a lockout/tagout program, and recall standard lockout/tagout procedures. 

 

Learning Objectives:

 

LO1 Define what is meant by the term ‘energy isolation’ 

LO2 Define terms commonly used in lockout/tagout operations 

LO3 Explain why energy isolation is important to safe operations 

LO4 Identify the regulatory requirements for energy isolation 

LO5 Identify areas which are exempt from regulatory requirements

LO6 Give an overview of employers’ responsibilities

LO7 Give an overview of how the locking and tagging process operates

LO8 Explain what is contained within a typical lockout procedure

LO9 Identify the steps required for restoring equipment to service

Course code: MUK-206
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide personnel with an awareness of US best practice in relation to noise and hearing conservation in the workplace.

 

Learning Objectives

LO1 Describe noise-induced hearing loss, and identify the early warning signs and symptoms to look for

LO2 Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage

LO3 Explain the responsibilities and duties of employers and individual personnel under current legislation

LO4 Explain how noise is measured and identify permissible workplace exposure levels 

LO5 Explain the risk assessment requirements

LO6 Identify the control measures that should be taken to reduce exposure to noise

LO7 Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection; advantages, disadvantages and attenuation of various types of hearing protection; instructions on selection, fitting, use and care of hearing protection; and the purpose of audiometric testing and an explanation of the test procedures

LO8 Explain the importance of health surveillance

 

Course code: MUK-204
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide learners with an overview of US best practice in relation to working safely with scaffolding.

Completion will allow learners to recognize the hazards associated with scaffolding and the type of scaffold being used at the work site and to understand the procedures required to control or minimize those hazards.

Target Audience: Personnel who use scaffolding during work tasks

 

Learning Objectives:

LO1 Describe safe practices for scaffolding operations

LO2 Identify different types of scaffolding and explain their uses, capacities, and safety considerations

LO3 Identify the hazards commonly associated with scaffolding operations and explain how these can be mitigated

LO4 Identify the PPE requirements for scaffolding operations, including the safe use of harnesses and fall protection 

LO5 Describe the specific precautions to take when working with scaffolding near power lines

LO6 Explain safe work practices that prevent falls and dropped objects from scaffolding

LO7 Explain what should be done in the event of an emergency 

 

Course code: MUK-210-FT
Course type: E-learning course
Duration: 35 minutes
Language: English (US)
Price: GBP 40,-

Course Goal: 

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

 

Learning Objectives:

 

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Course code: MUK-223
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide learners with an overview of US best practice in relation to working with forklift trucks.

This course aims to provide an awareness of how to operate a forklift truck in a safe and proper manner.

Course Level: Awareness

 

Learning Objectives:

 

LO1 Identify the regulatory requirements for forklift trucks

LO2 Give an overview of the differences between a forklift truck and a car

LO3 Explain the training requirements for forklift operators

LO4 Give an overview of the different categories of forklift trucks

LO5 Identify the typical components of a forklift truck

LO6 Identify the information provided on a forklift’s nameplate

LO7 Define what is mean by the terms ‘maximum load capacity’ and ‘rated load center’

LO8 Describe how to calculate the load capacity of a forklift truck

LO9 Explain the basic principles of how a forklift truck works

LO10 Describe the ‘stability triangle’

LO11 Identify common factors that can contribute to tip-over incidents

LO12 Explain what actions to take in the event of a tip-over

LO13 Describe OSHA’s requirements for the inspection of forklift trucks

LO14 Give an overview of best practice in relation to the safe operation of forklift trucks

LO15 Give an overview of refueling and recharging requirements

LO16 Give an overview of how forklift attachments can affect load capacity and safe operation

 

Course code: MUK-229
Course type: E-learning course
Duration: 45 Minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide learners of an awareness of US best practice in relation to confined space entry (CSE), hazardous atmospheres, and the necessary equipment, and permits required to work in confined spaces.

It will also examine the hazards and hazard control methods that are required to undertake work safely in a confined space and the actions that should be taken in an emergency.

 

Learning Objectives

 

LO1  Explain what is meant by a Confined Space

LO2  Give examples of Confined Spaces

LO3 Describe the dangers that can be caused by confined space entry work 

LO4 Identify OSHA requirements for permit-required entry operations

LO5 Explain how to avoid entering confined spaces

LO6 Explain the importance of having a Safe System of Work in place

LO7 Describe individual roles and responsibilities involved in Confined Space Entry work 

LO8 Explain the requirements for gas testing

LO9 Identify acceptable levels for atmospheric test results 

LO10  Give examples of Confined Space Entry site safety equipment

LO11  Explain the actions to take in an emergency 

LO12  Explain Confined Space Entry alarm procedures

Course code: MUK-216
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal: 

This course aims to provide an awareness of US best practice in relation to working with Naturally Occurring Radioactive Material (NORM).

 

Learning Objectives:

LO1 Define what is meant by NORM and where it is found

LO2 Explain what is meant by ‘radioactive material’ and the difference between alpha particles, beta particles and gamma rays

LO3 Describe the hazards associated with NORM

LO4 Identify the pathways for exposure to NORM

LO5 Identify the radiation protection principles

LO6 Explain the importance of radiation monitoring

LO7 Identify control measures that can be used to minimize the risk posed by NORM

LO8 Describe the PPE that should be used when working with NORM

LO9 Explain how to limit decontamination and correctly dispose of NORM

Course code: MUK-208
Course type: E-learning course
Duration: 20 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide personnel with an overview of US best practice in relation to the different types of respiratory protection used in the workplace.

 

Learning Objectives:

 LO1 Explain what is meant by Respiratory Protective Equipment (RPE)

LO2 Give an overview of the relevant regulations governing the use of RPE 

LO3 Identify the different types of RPE 

LO4 Explain the requirements for respirator fit testing

LO5 Describe the importance of filters when using RPE

LO6 Demonstrate how to correctly select RPE

LO7 Describe the factors to consider when wearing RPE

LO8 Explain the importance of correctly maintaining, cleaning, storing and inspecting RPE

 

Course code: MUK-205
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course goal:

This course aims to provide learners with an awareness of US best practice in relation to manual handling activities.

To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to give an overview of the OSHA requirements for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

 

Learning Objectives

 LO1 Define the term ‘manual handling’ and explain the importance of safe manual handling operations 

LO2 Identify the types of injuries that may result from improper manual handling operations 

LO3 Identify safe work practices in relation to manual handling operations

LO4 Describe the duties that are placed on employers and individual personnel in relation to manual handling operations

LO5 Explain the importance of risk assessing manual handling operations 

LO6 Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury 

LO7 Describe good handling techniques for safe lifting

LO8 Describe good handling techniques for pushing and pulling loads

LO9 Explain the training requirements associated with manual handling operations

 

Course code: MUK-203
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide learners with an understanding of US best practice in relation to working safely with ladders.

 

Learning Objectives:

 

LO1 Identify safe practices when working with ladders

LO2 Identify the types of portable ladders and their use, capacities, and safety considerations

LO3 Explain the correct placement of a ladder using the 4-to-1 rule

LO4 Identify specific use, capacities, and safety features of fixed ladders

LO5 Give an overview of guidelines for ladder care and maintenance

Course code: MUK-224
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: GBP 40,-

Course goal:

This course aims to provide learners with an understanding of US best practice in relation to working with asbestos.

This course aims to provide learners with an understanding of the hazards associated with exposure to asbestos. It will also identify where asbestos may be found, how it can potentially affect your heath, and what you need to do to protect yourself from exposure. 

  

Learning Objectives: 

LO1 Explain what asbestos is

LO2 Describe the various types, properties and uses of asbestos 

LO3 Describe the hazards of asbestos

LO4 Identify the regulatory protective measures that should be implemented when working with asbestos

LO5 Give an overview of the health impacts of asbestos exposure

LO6 Identify areas where asbestos may still be found and describe how to identify its presence

LO7 Explain what should be considered when planning work and undertaking a risk assessment

LO8 Describe the typical procedures to deal with an emergency involving the uncontrolled release of dust containing asbestos fibers

 

Hits per page