Course catalogue

Who is the course for?

Junior Engineers and Electro-tech Officers, Engineering and Electrical Ratings, Engineering and Electrical cadets.

Is previous experience required?

Basic maritime electrical engineering knowledge is recommended.

How will the course benefit me?

The course is designed to enable you to understand the basics around auxiliary generators and their uses.

How will the course benefit my company?

The course will provide the learners with basic knowledge about auxiliary generators and their uses.

What standards are referenced in the course?

IMO SOLAS 1974

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This Working in Cold Environments course is for personnel who require an introduction to or awareness of working in cold climates.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

Working in cold environments can be a significant challenge for comfort and the ability to perform work tasks in a safe and efficient manner.

How will this course benefit my company?

By ensuring you are aware of the challenges involved in performing work tasks in cold environments.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practices.

Is there an assessment?

Exam in Trainingportal with 80% pass mark with two attempts.

Before enrolling, candidates must confirm access to a qualified Onboard Assessor holding:

• STCW A-I/6 Onboard Assessor or Train the Trainer certificate
• STCW A-VI/5 Ship Security Officer certificate   

Failure to meet the above requirements will result in the training not approved.
   
STCW Training for courses approved by the NMA.  

Training includes:

• eLearning (90 min)
• Onboard practical training (12 hrs)
• Final exam (30 min)   

Read through the Evaluation Procedure for information prior to the training programme.

Please note: The checklist must not be printed or stored as hard copies as the document may be updated at any time. You must use the checklist provided within the Onboard Exercises Module or your submission will be rejected.

Who is this course for:

Ship Officers

Is previous experience required?

Documented 12 months sea service as an officer onboard an ISPS vessel.

How will this course benefit me?

On completion, you are able to undertake the duties and responsibilities of a Ship Security Officer, as per section A/12.2 of the ISPS Code and section A-VI/5 of the STCW Code.

How will this course benefit my company?

Qualified and certified Ship Security Officer (SSO).

What standards are referred to in this course?

STCW A-VI/5 and ISPS code section A/12.2.

Is there an assessment?

Final Exam (30min)

Certificate: Issued by The NMA which charge an additional fee. 

Who is the course for?

All trainee Maritime personnel working with fuel systems.

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

By providing you with an overview of fuel systems.

How will the course benefit my company?

By providing personnel with an overview of fuel systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
This course is aimed at personnel who routinely process personal data, such as IT or HR staff.

Is previous experience required?
You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?
Complying with the GDPR is mandatory for organisations processing personal data in the EU or EEA and for organisations processing the personal data of EU and EEA residents from abroad. This course introduces the principles and rights enshrined in the GDPR and the obligations organisations have to comply with it.  

How will this course benefit my company?
It will ensure you have an awareness of how you and your organisation must comply with the GDPR.

What standards are referred to in this course?
The EU General Data Protection Regulation (GDPR)

Is there an assessment?
Exam in TP with 80% pass mark with two attempts.

Who is the course for?  

This course is for those who are involved with Control of Work at a work site, specifically Performing Authorities.  

Is previous experience required? 

You do not need prior knowledge or experience to complete this course.  

How will the course benefit me? 

This course is designed to provide you with a comprehensive understanding of the key elements of a Safe System of Work (SSOW)} and demonstrate how understanding and following a Safe System of Work contributes to successful control of work.  

How will the course benefit my company? 

This course aims to ensure that all personnel have a consistent and common understanding of, and approach to Control of Work.  

What standards or regulations are referenced in the course? 

• The Health and Safety at Work Act 

• The Management of Health and Safety at Work Regulations 

• The Offshore Installations and Pipeline Works (Management and Administration) Regulations 

• The Control of Substances Hazardous to Health Regulations (COSHH), and 

• HSG 250 and 253 

• Electricity at Work Regulations 

• Provision and Use of Work Equipment Regulations (PUWER) 

• Lifting Operations and Lifting Equipment Regulations (LOLER) 

• Manual Handling Operations Regulations 

• Personal Protective Equipment at Work Regulations 

• Work at Height Regulations 

• Control of Vibration at Work Regulations 

• Control of Noise at Work Regulations, and 

• Confined Spaces Regulations  

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel who may have to carry out manual handling duties.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with information to help reduce the risk of injury due to incorrect manual handling.

How will the course benefit my company?

By reducing lost time due to injury as a result of poor manual handling techniques.

What standards are referenced in the course?

• International Labour Organisation

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel who require an understanding of major accidents in the maritime industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to major accident hazards.

How will the course benefit my company?

This course will provide personnel with an introduction to major accident hazards and the role that they play in the mitigation of catastrophic events.

What standards are referenced in the course?

Safety and Environmentally Critical Elements (SECE)

ISM Code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Personnel who require an awareness and understanding of shift handovers and risks to consider.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide the knowledge and techniques for carrying out efficient shift handovers

How will this course benefit my company?

By ensuring you have knowledge and know of techniques for carrying out efficient shift handovers

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Este curso está diseñado para permitirle:

• Definir qué se entiende por "caída de objetos".

• Identificar cuáles son las causas comunes de la caída de objetos y sus consecuencias y explicar la importancia de eliminar o reducir el riesgo de que ocurran incidents.

• Identificar las obligaciones de los empleadores y los empleados para eliminar los incidentes de caída de objetos.

• Identificar las áreas que presentan un alto potencial de lesiones al personal en caso de ocurrir un incidente de caída de objetos.

• Identificar ejemplos de malas prácticas.

• Describir las medidas que se deben adoptar para controlar el riesgo de caída de objetos

Who is the course for?
All personnel involved with confined space entry work

Is previous experience required?
No previous experience is required to complete this course.

How will the course benefit me?
This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

How will the course benefit my company?
The course will benefit companies by reducing confined space entry related injuries.

What standards or regulations are referenced in the course?
This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?
Yes, there is a course assessment with a pass mark of 80% with two attempts.

Who is the course for?

All personnel that come into contact with compressed air through maintenance or usage.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring.

How will the course benefit my company?

To reduce compressed air incidents and accidents.

What standards are referenced in the course?

No standard or regulations are referenced in this course

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace. 

Learning Objectives

LO1  Explain the principles of, and steps involved in, the Risk Assessment process

LO2  Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes 

LO3  Identify a typical Risk Assessment form    

LO4  Explain the requirements of the Risk Assessment team 

LO5  Recognise and explain Risk Assessment terminology

LO6  Identify the different steps within the Risk Assessment process 

LO7  Identify common, industry-specific hazards

LO8  Determine the appropriate level of Risk Assessment that may be required

LO9  Explain how to use a Risk Matrix to evaluate the level of risk

LO10  Explain how to identify appropriate control measures based on the Hierarchy of Control

LO11  Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’

LO12  Describe what to do if any Residual Risk remains too high

LO13  Explain how to carry out a Personal Risk Assessment and recognise its importance before each task 

LO14  Explain the importance of Dynamic Risk Assessment  

LO15  Identify situations where ‘Stopping the Job’ may apply

LO16  Explain the importance of communicating the outcomes of a Risk Assessment  

LO17  Understand the importance of communicating ‘Lessons Learned’

Who is this course for?

All personnel involved in carrying out tasks under a Permit to Work system and those responsible for the Control of Work.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course will provide you with an overview of the requirements and operation of a typical Permit to Work system.

How will this course benefit my company?

Completion of this course will reduce operational and regulatory risk by ensuring personnel understand and correctly apply modern UK offshore permit-to-work requirements, improving control of hazardous tasks and preventing incidents caused by poor work authorisation and coordination.

What standards are referred to in this course?

•    Health and Safety at Work etc. Act 
•    Management of Health and Safety at Work Regulations 
•    Offshore Installations (Offshore Safety Directive) (Safety Case etc.) Regulations 
•    HSE HSG250 – Guidance on Permit-to-Work Systems

Is there an assessment?

Course assessment has a 80% pass mark with two attempts.

Who is the course for?

All maritime personnel involved in the management of change process.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of the management of change process.

How will the course benefit my company?

This course will provide personnel with an overview of the steps involved in the management of change process, the roles and responsibilities of personnel, the risks involved in change management and how these risks can be controlled.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Personnel requiring awareness or understanding of SIRP.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

To ensure that relevant personnel have a common and consistent approach to industry best practice in relation to SIRP operations

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to SIRP operations

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

Learning Objectives

LO1 Define what is meant by Personal Protective Equipment (PPE)

LO2 Identify the different types of PPE 

LO3 Identify typical regulatory requirements associated with PPE

LO4 Describe the Hierarchy of Control measures and the use of PPE in relation to this

LO5 Explain the requirement for assessing the suitability and compatibility of PPE

LO6 Explain the maintenance requirements for PPE

LO7 Describe the duties and responsibilities of employees in relation to PPE

LO8 Explain the importance of PPE-related training, information and instruction

Who is this course for?

All personnel involved in marine operations.

Is previous experience required?

No experience is required to take this course.

How will this course benefit me?

By ensuring you know how to respond to marine trash and debris incidents.

How will this course benefit my company?

By ensuring you know how to respond to marine trash and debris incidents.

What standards are referred to in this course?

US best practise.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel, including Work Party members, Performing Authorities and Area Authorities.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with guidance and useful techniques to help you carry out effective Toolbox Talks.

How will this course benefit my company?

Communication is vital to workplace safety. This course aims to provide personnel with the knowledge and techniques required to carry out effective Toolbox Talks.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.