Course catalogue

Who is this course for?

Trainee Refinery Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of safe furnace operations.

How will this course benefit my company?

By ensuring you have an overview of safe furnace operations.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel requiring an awareness or understanding of lubrication systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course aims to introduce learners to the role of lubrication systems in maintaining mechanical equipment.

How will the course benefit my company?

By ensuring you are introduced to the role of lubrication systems in maintaining mechanical equipment.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who require an overview of the steps involved in the process of disconnecting flowlines.

Is previous experience required?

You do not require previous experience to complete this course.

How will the course benefit me?

By providing you with an overview of the steps involved in the process and disconnecting flowlines and the associated safety controls.

How will the course benefit my company?

By ensuring personnel are aware of the hazards posed by disconnecting flowlines and the steps that should be followed to ensure that the work is carried out safely.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require awareness or understanding of safety measures to take when using grinding equipment.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide personnel with an overview of industry best practice in relation to the safe use of grinding equipment

How will this course benefit my company?

By ensuring you have an overview of the use of industry best practice in relation to the safe use of grinding equipment

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

Trainee Production Operators and Trainee Instrument Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of process control systems.

This course has 7 sections:

Section 1: Open and Closed Loops

Section 2: Process Control Hardware

Section 3: Process Control Lag

Section 4: Control Modes

Section 5: Fault Finding Techniques

Section 6: Distributed Control Systems

Section 7: SIS and Cause and Effects

How will this course benefit my company?

To ensure you have an overview of process control systems.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of turbo expanders.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides an overview of the principles of turbo expansion.

How will this course benefit my company?

By ensuring you have an overview of the principles of turbo expansion.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of subsea control systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of subsea control systems and has the following sections:

Section 1: Evolution of Subsea Technology

Section 2: Subsea Completions Layout

Section 3: Subsea Control Systems

Section 4: Subsea Process Control

Section 5: Subsea Technology Development

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to Subsea Control Systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide an overview of seawater systems.

Who is this course for?

Trainee Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of seawater systems.

How will this course benefit my company?

To ensure you have an overview of seawater systems.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide an overview of industry best practice for working on small bore tubing systems.

Target Audience: All relevant personnel involved in the design, construction and maintenance of small bore tubing systems.

Learning Objectives

Section 1: Introduction to Small Bore Tubing Systems

LO1 Describe the importance of small bore tubing systems

LO2 Explain the importance of hazard management

LO3 Identify the importance of ‘standardisation’

Section 2: Principles of Compression Fittings

LO4 Identify different types of compression fittings and explain their function

LO5 Describe the different components of fittings and the principles of compression fitting sealing

LO6 Explain the considerations to be taken into account when selecting fitting components

LO7 Explain the importance of deformation

Section 3: System Preparation

LO8 Describe the process for preparing compression joints

LO9 Explain the process of tube cutting and the considerations that should be taken into account

LO10 Explain how to secure the nut of a compression fitting

LO11 Explain when and where an inspection gauge should be used

LO12 Explain the use and selection of suitable thread sealant

LO13 Explain why leak and pressure testing must be carried out

LO14 Describe the different thread types that can be encountered

LO15 Outline the differences between parallel and tapered threads

Section 4: Identification of Tubing and Compression Systems

LO16 Explain the importance of not mixing types and brands of fittings

Section 5: Hazards

LO17 Identify the common problems and issues encountered in small bore tubing systems

LO18 Describe how tube bending is carried out

LO19 Identify the requirements for adequate straight length adjacent to the fitting

LO20 Identify what determines the number of fittings in a system

LO21 Describe the causes and effects of vibration

LO22 Identify the considerations involved where there are components frequently installed and removed in a system

LO23 Describe the procedures and practices that must be followed when reinstating a small bore tubing system back to its original condition

Section 6: Correct Selection and Assembly Techniques

LO24 Explain how to select the correct components

LO25 Describe the checks that should be made during an installation

LO26 Describe the best practice that must be followed for working with compression fittings and small bore tubing systems

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This FAST TRACK course contains the following sections:

Section 1: An Introduction to Mechanical Joint Integrity
Section 2: Principles of Hand Torquing
Section 3: Principles of Hydraulic Tensioning
Section 4: Principles of Controlling Tightening
 

Who is this course for?

Personnel requiring an awareness or understanding of psychosocial work environments.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of what is meant by the psychosocial working environment.

How will this course benefit my company?

By ensuring you have an overview of psychosocial working environments.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of (Material) Safety Data Sheets ((M)SDS) for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the structure and information contained in Safety Data Sheets.

How will this course benefit my company?

By ensuring you have an overview of Safety Data Sheets and how your role may require to understand certain information contained in the sheets.

What standards are referred to in this course?

Chemicals (Hazard Information and Packaging for Supply) Regulations 2009

CLP Regulation

REACH Regulation

Control of Substances Hazardous to Health (CoSHH) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

Personnel in oil and gas operations or technical roles.

Is previous experience required?

It is recommended you have completed the principles of well control course prior to undertaking this course.

How will this course benefit me?

This course aims to provide an overview of snubbing.

How will this course benefit my company?

By ensuring your personnel have an overview of snubbing operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

Course Goal:

This course aims to provide learners with an awareness of nitrogen and provide best practice for work involving nitrogen in oil and gas producing facilities

This course covers the following learning objectives: 

LO1 Define nitrogen

LO2 Describe the properties of nitrogen

LO3 Explain why nitrogen is used in the workplace

LO4 Describe the hazards associated with nitrogen

LO5 Explain the importance of carrying out a risk assessment

LO6 Give examples of control measures that can be used to limit exposure to nitrogen

LO7 Describe how to use breathing apparatus

LO8 Explain how nitrogen affects the human body

LO9 Identify correct emergency response actions

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This FAST TRACK course assesses the following Learning Objectives:

LO1 Describe what noise-induced hearing loss is, and identify the early warning signs and symptoms to look out for
LO2 Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage
LO3 Explain the responsibilities and duties of employers and employees under current legislation
LO4 Explain how noise is measured and identify the noise levels above which employers should take action to reduce exposure
LO5 Explain the risk assessment requirements
LO6 Identify the control measures that should be taken to reduce exposure to noise
LO7 Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection
LO8 Explain the importance of healthsurveillance

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

Course Goal:

This course aims to provide an overview of managing hydrocarbon releases

This course covers the following learning objectives:

LO1 Describe the history of the hydrocarbon release risk reduction process

LO2 Describe safety instrumented systems

LO3 Describe the introduction of control of work procedures

LO4 Describe isolation procedures

LO5 Describe fire and gas detection systems

LO6 Describe hydrocarbon release reporting

LO7 Describe how different hydrocarbon fluids behave on release and describe how hydrocarbon mixtures may undergo a phase change

LO8 Explain the dangers of exposure to hydrogen sulphide (H2S) and identify the symptoms of H2S poisoning

LO9 Describe the range of leak rates that can occur with the different types of failure