Course catalogue

Requirements for training related to scaffolding are regulated by law and regulations. This course is based on the requirements of Regulations concerning the Performance of Work, Chapter 17, which is about assembly, dismantling and alteration of scaffolding.

-2-5 meters: 7.5 hours theory and  7.5 hours practical training

-5-9 meters: 15 hours theory and 15 hours practical training

-Over 9 meters: 36 hours theory and 72 hours practical training

This course covers the requirements of theoretical training for scaffolding up to 9 meters, and corresponds to the requirements of the Regulations concerning the Performance of Work, Section 17-2 and 17-3, on theoretical training. There is an additional requirement of 15 hours practical training if 5-9 meters.

Course content:
-What is scaffolding
-Scaffolding and safety
-Risk assessment
-Forces and counter forces
-Structure of a scaffold
-Wind forces
-How to prevent accidents
-Mobile scaffold towers
-Haki scaffolding systems

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis//

Kraner - Ståltau - Håndtering og vedlikehold, inspeksjon og kassasjon
Norsok Standard R-003N og R-005N - Sikker bruk av løfteutstyr.

Kursets målsetning:

Kraner - Ståltau - Håndtering og vedlikehold, inspeksjon og kassasjon.
Dokumentasjon av kontroll i samsvar med standard ISO-4309

Ståltau har røket ved flere anledninger. Dette kan føre til alvorlige hendelser og i verste fall kan liv gå tapt. Kurset skal gi elevene god innsikt i prinsippene for ståltauets oppbygning, konstruksjon og virkemåte. Ståltau beregnet til løfteredskap, kraner og winch. Montering, lagring, smøring, vedlikehold, terminering, endefester og brukskontroll.

Ståltau -Teori og praksis:
Dokumentasjon av kontroll i samsvar med standard ISO-4309

Introduksjon
Oppbygning av ståltau
Standarder for ståltau
Ståltau til kraner og maskiner
Bestilling av ståltau
Definering av bruddlaster
Håndtering, installasjon, vedlikehold og lagring
Smøring og vedlikehold
Ståltau skiver
Vinsjer og tromler
Termineringer og endefester
Typiske feil og skader
Kontroll av ståltau etter ISO 4309
Teoretisk og praktisk kontroll
Utfylling av kontroll/evalueringsskjema
Eksamen/test

Læremateriell, kursbevis, kaffe og lunsj er inkludert i kursavgiften.

This course is only available in Norwegian.

Kurset vil gi kranoperatører en god teoretisk grunnopplæring på bro og traverskraner slik at uhell og ulykker i forbindelse med løfteoparsjoner unngås. Opplæringen gir kandidatene god innsikt i prinsippene for traverskraners konstruksjon,virkemåte, vedlikehold og bruk. Ved bestått teoretisk og praktisk prøve, vil det gi grunnlag for utstedelse av kompetansebevis G4 Bro-og traverskraner.

Kursinnhold
- Innledning med krav til kranførerer
- Bruksområder for traverskraner
- Ulykker med bro- og traverskraner
- Oppbygging av forskjellige typer bro- og traverskraner
- Elektrisk anlegg på bro- og traverskraner
- Sikkerhetsbrytere 
- Ståltau / blokk 
- Sertifisering / dokumentasjon
- Kontroll og vedlikehold, sikkerhetsregler ved bruk

- Øvingsoppgaver 

- Eksamen

Modul 2.7 (16 timer) G4- Bro- og Traverskran 

Modul 3.7 - G4 (8 timer) Praktisk bruk

Modul 4.7 - G4 Bedriftsoppl. - 32 timer Oppl.virksomhet-16 timer

This course is only available in Norwegian.

Objective: The aim of the training is that those who are given training are given the opportunity to acquire theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation, but also for personnel who want a basic understanding of a rescue operation, evacuation equipment after a fall accident when using fall protection / rescue equipment.

The course runs over 3 days (24 hours)

Repetition 2 every year in accordance with NOG 113 and SFS.

Content:

- Introduction
- Regulations, guidelines
- Best practice
- Risk assessment
- Fall protection equipment
- Use of personal protective equipment
- Knowledge of different equipment and methods
- The equipment's limitations and possibilities
- Requirements for maintenance, storage and control
- Consequences of falls

Practical and theoretical review of rescue exercises

- Planning and risk assessment of rescue
- Basic first aid
- Rescue operation w / fresh air equipment
- Rescue of a hanging person
- Rescue from tanks / cramped spaces
- Rescue over open sea
- Descent / hoisting of person
- Stabilization of person
- Knowledge of hanging trauma

Only in Norwegian.

E-læringskurset IT-sikkerhet tar for seg de mest sentrale problemstillingene knyttet til sikkerhet rundt bruken av datautstyr som datamaskiner, mobiltelefoner og nettbrett. Du vil få kunnskap om ulike «feller» du som bruker lett kan gå i, samt nyttige og praktiske tips og veiledninger til hvordan du kan unngå at data kommer på avveie eller ødelegges permanent.

E-læringskurset inneholder hele 50 opplæringsvideoer. Etter endt opplæring kan du ta en ettertest for å måle dine nye kunnskaper. Ved bestått ettertest får du tilgang til et kursbevis.

Mens andre kurs fra DataPower Learning fokuserer på å bruke IT-verktøy effektivt, vil dette e-læringskurset gi deg innsikt i å bruke IT trygt og sikkert. E-læringskurset passer for databrukere i alle typer bedrifter og organisasjoner.

Kursinnhold

- Datamaskinen 

- Passord 

- Ute av kontoret 

- Minnepinner 

- Sikkerhetskopi 

- E-post

- Internett

The course covers the theoretical part of training the hooker and signals. The course will provide you with basic theoretical knowledge about the correct selection, control, use and maintenance of various types of lifting equipment. (Regulations on the performance of work § 10-1 and § 10-2).

The course includes these topics:

• Lifting equipment, words and expressions

• Hooking and center of gravity

• Lifting tables

• Fiber slings

• Chain gear

• Steel rope slings

• Shackles

• Eye bolts and eye nuts

• Signals and signs, load management

• Safety rules

• Exercises

• Final test

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i PowerPoint 2013. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene. En komplett e-læring med både grunnleggende og videregående emner. E-læringskurset inneholder 68 opplæringsvideoer.

Kursinnhold

Objective: The aim of the training is that those who are given training receive a repetition of acquired competence in theoretical and practical understanding of safe work operations / emergency operations with offshore cranes so that accidents and incidents can be avoided.

The aim of the training is that those who are given training receive a repetition of acquired competence in theoretical and practical understanding of safe work operations / emergency operations with offshore cranes so that accidents and incidents can be avoided.

The training is according to training plan module P-4.1.1 covers repetition requirements in NORSOK R-003.

Validity:

3 years according to NORSOK
2 years according to OPITO

Holders of a G5 certificate must meet the requirements for updating through module P-4.1.1 "Offshore crane simulator" within three years, and then update this every three years. If this update is not carried out the certificate is still valid, but the G5 certificate holder cannot operate a crane until the requirements for the simulator training have been completed.

Content:

- Introduction
- Accidents and accidents with offshore cranes
- Laws, regulations, standards, regarding offshore cranes
- Operational limitations of crane operations
- Planning of lifting operations (TBT, SJA, Work permits)
- Internal lifting, loading and lifting from / to supply boats, critical lifts, transport of personnel
- Emergency operations
- Communication
- Practical operations use of simulator
- Theoretical and practical exam

Kurset gir deg kunnskap om alle emnene i opplæringsplan Modul 2.3 – G11 Løfteredskap. Sertifisert sikkerhetsopplæring som gir deg fordypning om riktig valg, kontroll, sikker bruk og vedlikehold av ulike typer løfteredskap.

Innhold:

• Løfteutstyr, ord og uttrykk

• Anhuking og tyngdepunkt

• Løftetabeller og arbeidsvinkler

• Fiberstropper

• Kjettingredskap

• Ståltaustropper

• Ståltau til vinsj og endefester

• Sjakler

• Øyebolter, øyemuttere og løfteører

• Pallegafler, tobber og containere

• Åk, løftestativ, plateklyper, vakuum- og magnetløftere

• Integrerte løftepunkter

• Håndtaljer og innfesting

• Signaler og tegn, og styring av last

• Sikkerhetsregler

• Øvingsoppgaver

• Avsluttende test

Hovedmålet med opplæringen er å gi en innføring i Norsok standard R-003 og R-005 slik at kursdeltakerne blir familisert med - og kan bruke Norsok standard som oppslag i sitt daglige arbeid.

Regelverksreferanse:

Modul O-1.2

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i tekstbehandlingsprogrammet Word 2016. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. En komplett e-læring med både grunnleggende og videregående emner. E-læringskurset inneholder 79 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

Innhold:

- Før du starter

- Redigering

- Formatering

- Sideformatering

- Språkverktøy

- Tabeller

- Illustrasjoner

- Maler og skjema

- Fletting

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH International General Certificate in Occupational Health and Safety (IG) is one of the leading health and safety qualifications recognized globally.  It helps develop your understanding of general workplace issues and how they can be applied in different sectors around the world.

The new NEBOSH International Certificate focuses on the role of a real-life health and safety professional. It looks at the real, everyday risks that people encounter and how to manage them to help protect people and profits. 

You'll develop the essential risk management skills to create a safe and healthy workplace. And, you’ll have the foundation knowledge to make recommendations to your employer to help them improve health and safety management.

Upon completion of this course, learners will be able to:

• Justify health and safety improvements using moral, financial and legal arguments

• Advise on the main duties for health and safety in the workplace and help their organisation manage contractors

• Work within a health and safety management system, recognising what effective policy, organisational responsibilities and arrangements should look like

• Positively influence health and safety culture and behaviour to improve performance in their organisation

• Do a general risk assessment in their own workplace – profiling and prioritising risks, inspecting the workplace, recognising a range of common hazards, evaluating risks (taking account of current controls), recommending further control measures, planning actions

• Recognise workplace changes that have significant health and safety impacts and effective ways to minimise those impacts

• Develop basic safe systems of work (including taking account of typical emergencies) and knowing when to use permit-to-work systems for special risks

• Take part in incident investigations

• Help their employer to check their management system effectiveness – through monitoring, audits and reviews

Course Goal: This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

Learning Objectives:

LO1 Explain why the effective management of change is an essential part of operations in the Oil and Gas Industry

LO2 Define ‘change’

LO3 Describe the key stages in the management of change process 

LO4 Identify the key roles and responsibilities involved in effective management of change 

LO5 Identify the risks associated with management of change

LO6 Explain how the risks associated with management of change can be managed

Varme arbeider innebærer økt brannrisiko. Brannene skyldes ofte menneskelig svikt, mangel på kunnskap og omtanke. Noen av brannene innebærer også tap av arbeidsplasser og av kulturhistoriske bygninger. De som utfører varme arbeider må forstå hvilken brannrisiko varme arbeider innebærer og utføre arbeidet slik at brann ikke oppstår. Derfor har forsikringsselskapene innført krav om sertifikat for de som skal utføre varme arbeider.

Sertifikat for varme arbeider har en gyldighet på 5 år.


This course is only available in Norwegian.

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

This course is made for personnel involved in selection, erection, inspection and maintenance of equipment for potentially explosive atmospheres.

The courses give an introduction and repetition in different subjects treated in the relevant IEC 60079 Standards (NEK EN 60079).

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The course is suitable for personnel who should have an introduction in potentially explosive areas, marking, equipment, and requirements.

Participants will be introduced to the relevant parts of the NEK 420, IEC 60079 standard (NEK EN 60079-standards) as well as national adaptations where relevant.

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i Outlook 2013. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene. E-læringskurset inneholder 43 opplærings-videoer.

Course Content

- Sending av meldinger 

- Behandling av meldinger 

- Kalender 

- Personer 

- Oppgaver og notater

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i presentasjonsprogrammet PowerPoint 2016. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. En komplett e-læring med både grunnleggende og videregående emner. E-læringskurset inneholder 82 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

Innhold:

- Før du starter

- Utforming

- Tekst

- Bilder

- Figurer

- SmartArt-grafikk

- Diagram

- Tabeller

- Medier

- Framvisning

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics.

Effective remote working requires greater self-control and discipline to avoid the boundaries between work and personal life becoming blurred. Research has shown that, in general, homeworkers tend to work longer than office workers and this increases with the use of technology. Homeworkers do benefit from greater working time autonomy, but how effectively this is applied depends on the discipline of the individual.

The ‘Effective Remote Working’ bundle includes 3 months access to 10 online courses and over 7 hours of eLearning.  

• Management of Change

• Lone Working (Employees)

• Smart Workplaces: Responsible Social Media for Team members

• Business Writing: E-Mail Techniques

• AEC Success: Effective Decision Making

• Webinars – Conducting a Web-based Presentation

• ABCs of Managing Time & Effort: The 80/20 Way

• Smart Time Management: 7 Steps to Regaining Control of Your Day

• 3-way Communication

• Smart Customer Service 3: Effective Verbal and Nonverbal Communication

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i den digitale notatblokken OneNote 2016. En kombinasjon av videoer, teori, eksempler, oppskrifter og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. E-læringskurset inneholder 52 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

Innhold:

- Før du starter

- Notater

- Innholdselementer

- Outlook

- Søking

- Delte notatblokker

- Mobilappen

Hensikten med opplæringen er å gi truckførere allsidig praktisk opplæring og øvelse i sikker bruk av truck, slik at ulykker i forbindelse med bruken unngås. Opplæringen skal gi fører så gode kjøreferdigheter at vedkommende selvstendig på en sikker måte skal kunne gjennomføre oppdrag med truck.

Truckfører må imidlertid gjennomføre typeopplæring på den trucken som til enhver tid benyttes i tillegg til sertifisert sikkerhetsopplæring. Opplæringen avsluttes med en praktisk prøve som innbefatter kontroll og bruk av aktuelle trucker.

Bestått praktisk prøve på aktuelle trucker vil være grunnlag for utstedelse av kompetansebevis for fører av truck

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.2 (14 timer) Truck 

Modul 3.2 (6 timer) Praktisk bruk

Modul 4.2 Bedriftsoppl. - 20 timer Oppl.virksomhet-14 timer

The course is only available in Norwegian.

Hensikten med kurset er å gi blivende riggere en god teoretisk grunnopplæring i sikker bruk av: Fallsikringsutstyr og enkle løfteinnretninger (enkle travers- og søylesvingkraner, håndtaljer, luft- og eltaljer og transportable vinsjer.Opplæringen gir kandidaten god innsikt i prinsippene for fallsikringsutstyrs, enkle løfteinnretningers og transportable vinsjers konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggeoperasjoner unngås.

Deltakeren må ha fullført G11 stroppekurs før kursstart.

Opplæringen dekker den nødvendige teoretiske som er nødvendig for å kunne gjennomføre det praktiske riggekurset, Modul O 3.2.

Kurset avsluttes med en teoretisk prøve. 

Kursinnhold
- Fallsikringsutstyr
- Travers- og søyle- svingkraner
- Håndtaljer, luft- og el-taljer
- Transportable vinsjer
- Avsluttende teoretisk prøve

This course is only available in Norwegian.

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH International Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognised by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic and societal drivers, health & safety law and health & safety management systems. 

A1 - Principles of health & safety management

A2 - Principles of health & safety law

A3 - Criminal Law

A4 - Civil Law

A5 - Loss causation and incident investigation

A6 - Measuring and reviewing health and safety           

A7 - Identifying hazards, assessing and evaluating risk

A8 - Risk control

A9 - Organisational factors

A10 - Human factors

A11 - The role of health & safety practitioner

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

B1 - Managing Occupational Health

B2 - Identification, assessment & evaluation of hazardous substances

B3 - Control of hazardous substances

B4 - Monitoring and measuring

B5 - Biological agents

B6 - Physical agents - noise and vibration

B7 - Physical agents - radiation

B8 - Mental ill-health & dealing with violence & aggression at work

B9 - Musculoskeletal risks and controls

B10 - Work environment risks and controls

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction and transport. 

C1 - Workplace welfare requirements and specific workplace issues

C2 - Fire and explosion

C3 - Workplace fire risk assessment

C4 - Storage, handling and processing of dangerous substances

C5 - Work equipment (general)

C6 - Work equipment (workplace machinery)

C7 - Mobile, lifting, access and work at height equipment

C8 - Electrical safety 

C9 - Construction & works of a temporary nature - hazards and controls

C10 - Workplace transport and driving for work

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The concept intrinsic safety is unlike the other Ex protection concepts as it is a system concept. Therefore, it is necessary to understand the system as a whole, how the environment and individual components affect the system to maintain the integrity of the intrinsically safe system.

This course is only available in Norwegian.

E-læringskurset viser aktuelle funksjoner og muligheter i kommunikasjons­programmet Lync 2013. En kombinasjon av videoer, teori og oppskrifter gjør det enkelt å lære seg å kommunisere og samarbeide interaktivt med kolleger og andre kontakter. E-læringskurset inneholder 35 opplæringsvideoer.

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av løfteredskap slik at ulykker ved bruk unngås.

Regelverksreferanse:

Modul 1 - 2.3

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i Word 2013. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene. En komplett e-læring med både grunnleggende og videregående emner. E-læringskurset inneholder 64 opplæringsvideoer.

Kursinnhold

- Redigering

Objective: The course gives personnel a good theoretical and practical basic training in casting the socket according to EN 13411-4

The course gives personnel a good theoretical and practical basic training in casting the socket according to EN 13411-4. The training is for personnel who in their daily work will use or use steel ropes. This can be deck personnel, sailors, drilling personnel, crane operators or inspectors.

The course lasts 1 day (8 hours).

Content:

- Introduction
- Regulations
- Steel rope
- Sockets casting theory according to standard EN-13411-4
- Protective measures during casting
- Practical casting
- Cutting of steel ropes
- Preparation
- Cleaning
- Casting
- Control
- Exam

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course participants will gain the knowledge and skills to handle manual lifting properly and ensure their own safety with proper lifting in accordance with ergonomics.

The aim of this module is to encourage positive manual handling behavior and train delegates ability to perform manual handling tasks in a safe manner in the wind turbine industry / environment.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

Competence for "Manual handling" must be maintained in accordance with guideline in the GWO standard. It shall be conducted refresher training every 2 years.

The course is for performing personnel whose work may affect the safety of electrical installations through the use of possible ignition sources.

The course is in accordance with EN IEC 60079-14, NEK 420, the Petroleum Act, the ATEX Directive.

Objective: The purpose of the training is to provide crane operators, banksman / signalers with good general basic training in the safe use of lifting equipment, so that accidents and incidents in connection with use are avoided.

The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

The G11 Lifting equipment Module 2.3 course gives you who will work with lifting equipment knowledge about safety, daily control and maintenance as well as disposal rules for various lifting equipment. We want to give you a conscious attitude to the dangers that can arise and how to avoid them. Our G11 course is led by instructors with great competence and practical experience from the use of lifting equipment.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.

Contents Module 1.1

- Laws and regulations
- Working environment, responsibilities and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

Contents Module 2.3

- Laws and regulations
- Work equipment and accessories
- Construction and operation
- Lifting gear
- Control and inspection
- Cargo handling
- Work environment
- Dangerous cargo
- Final theoretical test

The IEMA Foundation course provides staff with a solid knowledge of the environment, sustainability, and governance principles relevant to organizations.  It covers specific management tools and skills with a practical application for the workplace to enable staff to improve performance.

Develop the knowledge and skills to help improve sustainability and environmental performance

Learn practical skills to help reduce the impacts of the organization on the environment

Upon completion of this course, learners will be able to:

• Understand business, governance, and environmental principles and their relationship with organizations, products, and services

• Ensure compliance with major environmental policy and legislation 

• Implement specific tools, techniques, systems, and practices to improve sustainability performance

• Collect data, perform analysis and evaluate information to provide sustainable solutions

• Implement change and transformation to improve sustainability

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.

Topics:

• Understand the general principles of type of specific protection and correct labeling of components approved in intrinsically safe facility (IS)

• Current Exi Standard

• Could choose to install the correct Exi equipment in hazardous areas accordance with IEC 60079-14 standards and 60079-25

• How to work safely with IS

• Requirements for competence to perform work on Exi installations

• How to verify and calculate an Exi circuit

Standards:

• NEK EN 60079-11

• NEK EN 60079-14

• NEK EN 60079-25

• IEC 60079-11

• IEC 60079-14

• IEC 60079-25

This course is only available in Norwegian.

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics. 

Maintaining health and well-being while working from home encompasses many areas, including ergonomics, preventing feelings of isolation and effectively managing stress. Studies have found that more than half of people working from home had not paid any attention to ergonomics, and 94% of them reported that neither had their employers. Almost half of remote workers have experienced work-related pains. One of the most problematic aspects of home working is the isolation and the lack of access to day-to-day informal interactions. While remote working enables greater autonomy, it also leads to higher levels of work intensity. The ‘24/7’ availability for work can result in family conflict and stress. Key areas to promote a positive work-family interface include the parental ability to cope with children and amicable resolutions of conflict about working hours, household work and personal time in the family.

The ‘Healthy Home Working’ bundle includes 3 month access to 12 online courses and over 9 hours of eLearning.

• Stress Awareness

• Working Time Limits and Fatigue Management

• Display Screen Equipment (DSE)

• Ergonomics

• Health and Safety for Home Workers (Employees)

• Medicine Awareness

• Smart Health: Sleeping – How to Ensure You Are Well-Rested & Energized

• Smart Mental Health: Managing Anger and Emotions

• Smart Mental Health: Keys to Successful Parenting

• Smart Health: Drinking Responsibly

• Smart Mental Health: Reducing Stress and Anxiety

• Smart Mental Health: Mastering Marriage

The modern workplace is often thought of as a strictly professional, rational, logical environment. Cooperation is key--personal opinions and emotions must be put aside in the name of teamwork, which may be easier said than done! No one can expect to connect with fellow colleagues the way they do their own friends or family members. One crossed word or bad mood can damage corporate relations, sometimes irreparably. The uncertainty of the business environment of today, and resulting stress that follows only adds to the pressure workers feel in performing their level best. Feeling overworked and overwhelmed is natural in the workplace, especially when it comes to dealing with change.   The purpose of this course is to illustrate ways you can overcome the emotional barriers you may face in the workplace. This course will guide you through various exercises and give you tips to help you manage your emotions at work so you can perform to the best of your abilities.

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av personløftere, slik at ulykker ved bruk unngås.

Regelverksreferanse:

F-2699 Statoil rev.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

Competence for "Working at heights" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Hovedmålet med kurset er å gi deltakerne generelle kunnskaper og ferdigheter som «kompetent person» i periodisk kontroll av ass. fallsikringsutstyr.

Kurset starter med fellesteori som er en grunnleggende innføring i aktuelle lover og forskrifter og en grunnleggende innføring i sikker bruk av arbeidsutstyr. Fagdelen vil gi eleven en god teoretisk grunnopplæring i sikker bruk av masseforflyttingsmaskiner samt en god innsikt i oppbygging, virkemåte, vedlikehold og bruk.

Eleven skal gjennomføre teorimodul 1.1 (8 timer), modul 2.1 (24 timer) og  3.1 (8 timer). Dette skal gi førerne en god generell grunnopplæring i sikker bruk og praktisk forståelse for prinsippene for masseforflytningsmaskiner.

Kurset gjennomføres over 5 dager, og avsluttes med en teoretisk prøve.

Etter bestått teoretisk prøve og gjennomført grunnleggende praktisk bruk modul 3.1 + praksiskjøring 32 timer, kan praktisk prøve gjennomføres. Bestått praktisk prøve vil være grunnlag for utstedelse av kompetansebevis for fører av masseforflyttingsmaskin i valgt klasse.

Kursinnhold

- Konstruksjon

- Oppbygging

- Betjening

- Bruksegenskaper

- Bruksområder

- Sikkerhetsutstyr

- Viktige kontrollpunkter

- Vedlikehold


This course in only available in Norwegian.

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av traverskraner, slik at ulykker ved bruk unngås.

Regelverksreferanse:

Modul 2.7 - 3.7 - 4.7

Provided in association with Astutis, approved centre 1857.

IOSH Managing Occupational Health and Wellbeing course will provide managers with the practical advice and tools to help create a healthy and productive workplace.

IOSH Managing Occupational Health and Wellbeing is targeted at line managers and offers them practical advice to manage health risks and understand their responsibilities for the health and wellbeing of staff.  It equips line managers with the basic tools and techniques to play their part in improving health and wellbeing across their organisation.

The course is split into 4 modules and covers:

• Importance of managing workplace health and wellbeing

• Health risk management

• Fitness for work and the need to manage changes in the health status of employees

• The business value of promoting a wellbeing programme

Hensikt: Grunnleggende overlevelsestrening for offshore vindindustri. 

Ved gjennomføring av Global Wind Organization (GWO) Basic Safety Training (BST) vil delegatene ha en bevissthet om farene som oppstår når de arbeider i vind-industrien og hvordan man kontrollerer og reduserer disse farene.

Kursdeltakerne vil få (repetert) kunnskap og ferdigheter til å anerkjenne fordeler og begrensninger knyttet til livreddende utstyr og PVU samt korrekt bruk av dette i forbindelse med offshore vind. 

Hensikten med kurset er å gi deltakerne kunnskaper/oppfriskning om livreddende utstyr, GMDSS og SAR utstyr, hvordan en kollektivt kan øke sjansen til overlevelse i en nødsituasjon, hvordan entre og forlate vindturbiner, samt evakuering i nødsituasjoner. 

Kurset dekker krav til opplæring av personell og repetisjonskurs både land- og havvind iht:

- Global Wind Organization (GWO)

- Arbeidstilsynet (Forskrifter)


Kompetanse for «Sea Survival» skal vedlikeholdes iht. retningslinje i GWO standarden. Det skal gjennomføres repetisjonskurs hvert 2. år.

This course is only available in Norwegian.

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics.

Effective remote working requires greater self-control and discipline to avoid the boundaries between work and personal life becoming blurred. Research has shown that, in general, homeworkers tend to work longer than office workers and this increases with the use of technology. Homeworkers do benefit from greater working time autonomy, but how effectively this is applied depends on the discipline of the individual.

The ‘Effective Remote Working’ bundle includes 3 months access to 10 online courses and over 7 hours of eLearning.  

• Management of Change

• Lone Working (Employees)

• Smart Workplaces: Responsible Social Media for Team members

• Business Writing: E-Mail Techniques

• AEC Success: Effective Decision Making

• Webinars – Conducting a Web-based Presentation

• ABCs of Managing Time & Effort: The 80/20 Way

• Smart Time Management: 7 Steps to Regaining Control of Your Day

• 3-way Communication

• Smart Customer Service 3: Effective Verbal and Nonverbal Communication

This course is made for personell envolved in design, planning, projecting, installation and maintenance on electrical installations and equipment offshore. 

The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Objective: The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Content:

- An easy to understand overview and explanation of the committees/regulations/standards and how they are intertwined. 

- Presentation of the regulations and norms: PTIL 5 HMS, Nek 410 (IEC 60092), Nek 420 (IEC 60079), ATEX directives including standards and the Norsok series. 

- The structure and history of the IEC 61892 series, and the scope and application. 

- By using a fictive, illustrated installation, we will focus on the practical elements covered in the following standards: 

o IEC 61892-1 - General requirements and conditions 

o IEC 61892-2 - System Design 

o IEC 61892-3 – Equipment 

o IEC 61892-4 – Cables 

o IEC 61892-6 – Installation 

o IEC 61892-7 – Hazardous areas

This course is only available in Norwegian.

Hensikt:

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Opplæringen gir også kunnskap om farer forbundet med løfteoperasjoner samt bruk av risikokartlegging.

Kurset gir deltakere kunnskap til å kunne utøve overordnet operasjonell ledelse av løfteoperasjoner. Med det menes å kunne planlegge, risikokartlegge og evaluere, samt forebygge ulykker. Videre vil deltaker også tilegne seg kunnskaper om å gjøre rede for materialhåndteringsplan, oppbevaring og bruk av utstyr.

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Innhold:

• Krav og ansvar til rollen operasjonelt ansvarlig

• Lover, forskrifter, standarder og retningslinjer som gjelder vedr. bruk av løfteutstyr

• Overordnet operasjonell ledelse av løfteoperasjoner

• Helhetlig planlegging av løfteoperasjoner

• Risikokartlegging

• Identifisering av og etablering av barrierer. Gjennomføring og evaluering av en løfteoperasjon

• Informasjonsutveksling

• Krav for oppbevaring av løst løfteutstyr

• Krav for ulike typer løfteutstyr

• Krav til fadder, praksis og sensor

• Avsluttende prøve

Objective: The aim of the training is that theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident is refreshed and repeated.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation. Participants must gain expertise in risk assessment, rescue (equipment and methods) and first aid.

Covers repetition requirements every 2nd year in accordance with NOG 113 and SFS.

Content:

Introduction
Regulations
Review of accidents and incidents
The rescue service
Equipment
Routines when working at height
Risk assessment
Management, site of injury
Stress and stress management
Hanging trauma, CPR
Rescue drills
Evaluation

Objective: The purpose of the training is to provide users of work equipment mentioned in § 10-1 and 10-3 in «Regulations on the performance of work» (no. 1357), a good general basic training in the safe use of work equipment, so that accidents and accidents in connection with use is avoided.

The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.

Content:

- Laws and regulations
- Working environment, responsibilities, and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH National Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognized by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic, and societal drivers, health & safety law, and health & safety management systems. 

A1 - Principles of health & safety management

A2 - Principles of health & safety law

A3 - Criminal Law

A4 - Civil Law

A5 - Loss causation and incident investigation

A6 - Measuring and reviewing health and safety           

A7 - Identifying hazards, assessing and evaluating risk

A8 - Risk control

A9 - Organisational factors

A10 - Human factors

A11 - The role of health & safety practitioner

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

B1 - Managing Occupational Health

B2 - Identification, assessment & evaluation of hazardous substances

B3 - Control of hazardous substances

B4 - Monitoring and measuring

B5 - Biological agents

B6 - Physical agents - noise and vibration

B7 - Physical agents - radiation

B8 - Mental ill-health & dealing with violence & aggression at work

B9 - Musculoskeletal risks and controls

B10 - Work environment risks and controls

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction, and transport. 

C1 - Workplace welfare requirements and specific workplace issues

C2 - Fire and explosion

C3 - Workplace fire risk assessment

C4 - Storage, handling, and processing of dangerous substances

C5 - Work equipment (general)

C6 - Work equipment (workplace machinery)

C7 - Mobile, lifting, access, and work at height equipment

C8 - Electrical safety 

C9 - Construction & works of a temporary nature - hazards and controls

C10 - Workplace transport and driving for work

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics.

Managing remote teams and business continuity are operational priorities for companies during the COVID-19 pandemic.  Remote working allows some operations to continue and facilitate flexible work schedules, which typically improves individual performance. However, greater flexibility and leading teams remotely puts a greater burden on managers and makes supervision more complex. 

The group of workers who experience most difficulty in handling ‘boundary-less’ working are actually managers.  This is mainly because they are connected longer in their ‘non-working time’.

The ‘Managing Remote Teams’ bundle includes 3 months access to 10 online courses and over 10 hours of eLearning. 

• Negativity in the Workplace

• Decision Making

• Supporting Change: 03-Your Path to Supporting Change

• Management 101: 02-Leading and Communicating as a Manager

• Smart Management: Managing a Geographically Distributed Workforce

• Health and Safety for Home Workers (Managers)

• Lone Working (Managers)

• An Effective Leader’s Guide to Time Management

• Team Building IV: Conflict Management

• Essential Skills of Leadership: 05-Lead Effective Meetings