Course catalogue

This course is made for personnel who organize or perform: planning, installation, inspection and maintenance of Ex equipment.

The course gives an introduction and repetition in different subjects treated in the IEC 60079 Standard (NEK EN 60079).

The course duration is 5 hours and is valid for 5 years

The course can also be taken as a refresher course for Ex maintenance

Themes:

• Fundamental Ex philosophy, refresher

• Preparing and installing electrical equipment in hazardous areas

• Inspection and maintenance of electrical equipment in Ex areas

• Understand what maintenance tasks can be done locally, and what must be performed by an authorized workshop

• Give candidates for CompEx certification a solid background for the theoretical assessment

Who is this course for?

This course aims to provide learners with an awareness of US best practice in relation to the values that govern responsible corporate practice and personal behaviors in the workplace.

Is previous experience required?

No previous experience is required. 

How will this course benefit me?

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behavior in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. 

You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

How will this course benefit my company?

By ensuring that all personnel are familiar with applicable laws on human rights, equality, discrimination and corruption.

What standards are referred to in this course?

The Civil Rights Act 1964

The UK Equality Act 2010

The US Foreign Corrupt Practices Act 

The UK Bribery Act 2010

The International Labor Organization (ILO)

Is there an assessment?

No

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.

COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.

STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY? 

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment. 

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.

For more information and prices: 

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

Who is this course for?

All employees at all levels of the organisation who require an awareness of steps to take in the event of armed attack.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

The main idea behind the course is that knowledge about and reflection on what to do makes us feel more confident and able to make informed choices.  In a public area or at work, are you aware of what the premises look like, and how you can evacuate if a situation should occur? In order of priority you should act in this way; Run, Hide, Fight!

The course describes these guidelines in more details and also allows the user to reflect upon various aspects of an armed attack.

How will this course benefit my company?

By ensuring you are aware of the priorities should an armed attack occur.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

There is no exam upon completion of this course.

Who is this course for?

All relevant personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

How will this course benefit my company?

By ensuring you have an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

What standards are referred to in this course?

Provision and Use of Work Equipment Regulations 1998 (PUWER)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who require knowledge or awareness of dangerous goods within HEMS operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course is part of the required trainings for HEMS operating crew, and covers classification of dangerous goods, how dangerous goods is divided into hazard classes, how it should be marked and labelled and what emergency procedures should contain.

This course must be repeated every 24 months.

How will the course benefit my company?

By ensuring you are familiar with the classification of dangerous goods, how dangerous goods is divided into hazard classes, how it should be marked and labelled and what emergency procedures should contain.

What standards are referenced in the course?

• International Civil Aviation Organization (ICAO)

• International Air Transport Association (IATA)

"Who is this course for?

Personnel requiring awareness or understanding of gas detection and measurement methods.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide information about the types of gases found in the oil and gas industry and how these gases are detected and measured

How will this course benefit my company?

By ensuring you have  information about the types of gases found in the oil and gas industry and how these gases are detected and measured

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. "

Who is this course for?

Personnel requiring an awareness or understanding of flare systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides an overview of flare systems.

How will this course benefit my company?

By ensuring you have an overview of flare systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Norske myndigheter pålegger arbeidsgiver å sikre at alle arbeidstakere har fått dokumentert opplæring i betjening av alt arbeidsutstyr som anses som farlig, eller krever særlig forsiktighet ved bruk. («Forskrift om utførelse av arbeid» nr. 1357, § 10-2 Krav om dokumentert sikkerhetsopplæring ved bruk av arbeidsutstyr.) Kurset gir en grunnleggende innføring i sikker bruk av farlig småverktøy som eksempelvis: vinkelslipere, kappsag, boltepistol og spikerpistol. Når kurset er bestått kan man laste ned kursbevis umiddelbart.

Hensikt:

Gi kursdeltakerne økt kunnskap og bevisstgjøring av sikkerhetstiltak, for å unngå personskader og ulykker på arbeidsplassen.

Innhold:

Følgende emner blir bl.a. gjennomgått:

– Oppbygging

– Betjening

– Brukeregenskaper

– Bruksområder

– Vedlikehold

– Sikker bruk og sikkerhetsregler

– Holdninger og motivasjon

– Lover og forskrifter

Hver leksjon inneholder en video.

This course is only available in Norwegian.

Who is this course for?
Newcomers to the Oil and Gas Industry

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide a brief overview of fire and safety systems

How will this course benefit my company?
By ensuring you have a brief overview of fire and safety systems.

What standards are referred to in this course?
Health and Safety at Work Act
The Management of Health and Safety at Work Regulations
The Regulatory Reform (Fire Safety) Order
The Fire (Scotland) Act

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations offshore.

The course also provides first-aid instruction and training. CPR training must be completed separately.

In accordance with section 7 of FSE, FSE and and first-aid training must be completed at least once a year. In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course addresses a variety of issues and covers how to prevent electrical accidents, routines in the event of accidents, and theoretical first aid, and aims to help prevent harm to people, equipment, and installations.

The course covers the following topics:

- How to handle substance abuse
- Drug policies
- AKAN

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

We investigate to learn, to implement preventive measures and prevent recurrence of adverse events. Investigating an incident is like peeling an onion. We start with the direct causes which are the most visible. To get to the bottom of the events we must uncover "layer upon layer" which others causes lay behind. The technological development, and new forms of organizations, increase the complexity and it becomes more difficult to understand the connection between the incident and the underlying causes. This course presents method, organization and process for the implementation of investigations. The course can also be offered in combination with a classroom session.

COURSE CONTENT

- Description and classification of events

- Organization of an investigation

- Collection and securing of information

- The cause of loss model

- MTO model

- STEP model

- Reporting and follow-up

HOW WILL THIS COURSE BENEFIT ME AND MY COMPANY?

After completing the course, participants should understand what investigation is and know the various steps in an investigation process. Participants will also receive knowledge of how investigations are conducted and implemented in practice.

Course provider: Proactima

The course provides knowledge about the structure, operation, applications and usage, maintenance and monitoring of the appropriate tool. The training provides knowledge about the requirements for safe use and operation stipulated in regulations and instructions.

Along with a practical review of the tools, the course meets the requirements for documented training in hazardous work equipment in Regulations concerning the Performance of Work.

The course covers the following subjects:

- Introduction to general HSE
- Angle grinder
- Hammer drills, jackhammers and combihammers
- Powder actuated gun
- Nail gun
- Saws with blade (includes table saw, crosscut and miter Saw, circular saw, jigsaw and reciprocating saw)
- Chain saw

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with an overview of the safety precautions to be taken when working on electrical equipment

How will this course benefit my company?

By ensuring you have an overview of the safety precautions to be taken when working on electrical equipment

What standards are referred to in this course?

Health and Safety at Work Act (1974)

Electricity at Work Regulations (1989)

Management of Health and Safety at Work Regulations (1999)

Electricity at Work Safe Working Practices (2003)

Offshore Electricity and Noise Regulations (1997) 

Provision and Use of Work Equipment Regulations (1998)

BS 7671: 2008 Requirements for Electrical Installations

Offshore Installations (Safety Case) Regulations 2005 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%

Who is this course for?
All personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with a guide on the preventative and protective measures that may be put in place at workplaces following personnel return

How will this course benefit my company?
By ensuring you have an overview of the preventative and protective measures that may be put in place at workplaces following personnel return

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general

• Use of work equipment

• Selection of work equipment

• Training in the use of work equipment

• Workspaces and personnel requirements

• Risk assessment

• Safety, accidents and liability

• Direct and underlying causes of accidents

• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

The course covers the following topics:

- Duties for safety representatives
- Tools
- Safety inspections
- Management and support

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course provider: Proactima

Hensikten med opplæringen er å gi blivende riggere en god praktisk grunnopplæring i sikker bruk av riggerutstyr. Opplæringen skal gi elevene god innsikt i prinsippene for riggutstyrets konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggoperasjoner unngås. Riggoperasjon: Bruk og sammenstilling av transportabelt løfteutstyr og/ eller manuelle/ kraftdrevne vinsjer, taljer etc. som benyttes ved horisontal og/ eller vertikal forflytning av last. Opplæringen dekker den nødvendige teoretiske og praktiske opplæringen som er nødvendig for å kunne gjennomføre selvstendige riggoperasjoner. Opplæringen avsluttes med en praktisk prøve.

Modul O-2.2: Fallsikring - Søylesvingkran / enkel traverskran - Taljer / vinsjer. (16 timer opplæring).

Modul O-3.2: Rigging (32 timer opplæring) Beviset kan utstyres med opplæringsbedriftens/virksomhetens logo.

This course is only available in Norwegian.

Who is the course for?

This course aims to provide an overview of the requirements for the safe handling of radioactive materials for personnel who work closely with it.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the risks involved in working with radioactive materials.

How will the course benefit my company?

The course will benefit companies by ensuring that personnel understand the risks of working with radioactive materials and how to mitigate these risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course covers the following topics:

- Act and Regulations
- Purpose
- Responsibility
- Participants and roles
- Internal control regulations

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Norwegian authorities demand that employees who need to use fall protection equipment in their line of work have been given sufficient training in the use of this equipment. It is the employer’s responsibility to ensure the employees have received this training. The course provides basic theoretical knowledge of fall protection measures and equipment.

Objective:
The course gives insights into fall theory and common fall protection methods and equipment. It raises safety awareness and helps prevent accidents and injuries at the workplace.

Themes discussed:
- Why falling accidents happen
- Laws and regulations
- Risk assessment
- Safe job analysis
- Equipment choices
- Rescue plan

Every lesson contains a video presentation

Who is this course for?

Everyone working on high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on high voltage installations.

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course covers the theoretical part of training the hooker and signals. The course will provide you with basic theoretical knowledge about the correct selection, control, use and maintenance of various types of lifting equipment. (Regulations on the performance of work § 10-1 and § 10-2).

The course includes these topics:

• Lifting equipment, words and expressions

• Hooking and center of gravity

• Lifting tables

• Fiber slings

• Chain gear

• Steel rope slings

• Shackles

• Eye bolts and eye nuts

• Signals and signs, load management

• Safety rules

• Exercises

• Final test

Who is this course for?

Personnel requiring and awarneess and understanding of welding operations and appropriate safety controls.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of industry best practice in relation to welding operations

How will this course benefit my company?

To ensure you have an overview of industry best practice in relation to welding operations

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

The course is designed for people who already know how to declare on paper and who want to learn how it is done electronically.

COURSE DESCRIPTION

We investigate to take lesson learned, implement preventive measures, and to prevent recurrence of adverse events. Investigating an adverse event is like peeling an onion. We start with the direct causes that are the most visible. To get to the bottom of the events, we must uncover "layer upon layer" to discover the causes behind. Technological development and new organizational structures lead to an increase in complexity, and it becomes more difficult to understand the connection between an incident and the underlying causes of an incident. This course presents method, organisation, and process for conducting investigations. The course can also be offered in combination with a classroom session.

COURSE CONTENTS 

• Description and classification of adverse events

• Organising an investigation

• Handling information and evidence

• The loss-causation model

• The MTO model

• The STEP model

• Reporting and follow-up

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY?

After completing the module, participants will understand what inquiry is and to the various stages of the investigation process. Participants will also learn about how the investigation is led and implemented in practice.

For more information and prices, please contact us:

https://trainingportal.com/

Email: learning@proactima.com

Phone: (+47) 4000 1933

Contact Proactima for a tailormade solution for your company.

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course provider: Proactima

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

Norwegian authorities demand that everyone using personnel lifts must have documented training in the use of lifts. It is the employers’ responsibility to provide such training for their employees. (See “Regulations concerning the performance of work” nr. 1357, § 10-2)

Objective:
The course provides theoretical knowledge in the use of personnel lifts and raises the awareness of risks and ways to mitigate these.

Themes discussed:
- Law and regulation
- Operation
- Types of lifts and their usage
- Maintenance and control
- Classification
- Unwanted incidents and risks 

Every lesson contains a video presentation.

Hensikten med kurset er å gi blivende kranførere god teoretisk og praktisk grunnopplæring på fastmonterte hydrauliske kraner. Kurset gir elevene god innsikt i prinsippene for kranens konstruksjon og virkemåte. Etter endt kurs med bestått teoretisk prøve vil denne sammen med bestått praktisk kjøreprøve være grunnlaget for utstedelse av kranførerbevis G20 Fastmontert hydrauliske kraner.

Opplæringen dekker kompetansekrav i NORSOK standard R003N for Kranfører G20. 

Kursinnhold
- Innledning
- Konstruksjon
- Hydraulikk
- Mekanikk
- Lover / forskrifter / standarder
- Ståltau / vinsj / blokker
- Dokumentasjon
- Sikkerhetsbestemmelser
- Løfteredskap
- Øvingsoppgaver
- Eksamen

This course is only available in Norwegian.

E-lærings kurset er ment å gi en så enkel som mulig veiledning for bruk av åndedrettsvern som de fleste norske virksomheter der støv er en utfordring, kan forholde seg til.

Hensikt:

Helseeffektene av støveksponering får stadig mer oppmerksomhet. Alt støv i store konsentrasjoner representerer en belastning på lungene. Støv i arbeidsatmosfæren må reduseres i mange bransjer. Selv om de yrkeshygieniske forhold bedres, vil det alltid være behov for bruk av åndedrettsvern ved arbeidsoperasjoner der eksponeringen er høy.

Effekten av bruken av åndedrettsvern avhenger av en rekke faktorer, og det er i dag mye flott utstyr å velge mellom, og det er mye kunnskap på området. Men for de fleste er det en utfordring å tilegne seg dette. Fagfeltet oppleves som en jungel, der man ikke helt vet hvor man skal lete.

Kurset gir bedriften et grunnlag for å vurdere utfordringer og tiltak.

Innhold:

• Hva er støv?
• Støv og helseeffekter
• Valg av støvmaske
• Valg av støvfilter
• Tilpassing av maska
• Vedlikehold av maska

This course is only available in Norwegian.

Hovedmål med kurset er å gi personer som skal utøve rollene som signalgiver, anhuker, dekksoperatør, boredekksarbeider, rigger og operatør av løfteinnretning opplæring i vurdering og forståelse av farer samt sikker bruk, vedlikehold, daglig kontroll og kasseringsregler for ulike typer løfteredskap. Anhuker og signalgiver skal samhandle og kommunisere med operatør av løfteinnretning i enhver løfteoperasjon på en slik måte at uønskede hendelser unngås.

Kursinnhold
- Innledning
- Lover, forskrifter og standarder
- Personlig verneutstyr og farlig gods
- Krav til signaldgiver og anhuker
- Planlegge, gjennomføre og evaluere
- Oppbevaring, bruk og kontroll av løfteredskaper
- Sikkerhet for personell
- Kritiske løfteoperasjoner
- Løftetabeller
- Praktisk bruk løfteredskaper
- Evaluering og avsluttende prøve

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser 

Modul 2.3 (16 timer) G11- Løfteredskap 

This course is only available in Norwegian.

Requirements for training related to scaffolding are regulated by law and regulations. This course is based on the requirements of Regulations concerning the Performance of Work, Chapter 17, which is about assembly, dismantling and alteration of scaffolding.

-2-5 meters: 7.5 hours theory and  7.5 hours practical training
-5-9 meters: 15 hours theory and 15 hours practical training
-Over 9 meters: 36 hours theory and 72 hours practical training

This course covers the requirements of theoretical training for scaffolding up to 9 meters, and corresponds to the requirements of the Regulations concerning the Performance of Work, Section 17-2 and 17-3, on theoretical training. There is an additional requirement of 15 hours practical training if 5-9 meters. 

Course content:
-What is scaffolding
-Scaffolding and safety
-Risk assessment
-Forces and counter forces
-Structure of a scaffold
-Wind forces
-How to prevent accidents
-Mobile scaffold towers
-Haki scaffolding systems

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis/

Du må ha gjennomført stillaskurs del 1 før dette kurset. 

Dette kurset er bygget på krav i Forskrift om utførelse av arbeid, kapittel 17, som omhandler montering, demontering og endring av stillas.
Forskriften krever opplæring for ulike stillashøyder:
-2-5 meter: 7,5 timer teori og 7,5 timer praksis
-5-9 meter: 15 timer teori og 15 timer praksis
-Over 9 meter: 36 timer teori og 72 timer praksis.

Dette kurset forutsetter at du har gjennomført stillaskurs del1. Til sammen dekker disse kursene kravene til teoretisk opplæring for stillas over til 9 meter, og tilsvarer kravene i Forskrift om utførelse av arbeid § 17-2 -17-4 om teoretisk opplæring.
I tillegg er det krav om 72 timer praktisk opplæring under tilsyn av kvalifisert person, ref Forskrift om utførelse av arbeid § 17-2 - 17-4.

Kursinnhold:
-Innledning
-Risiko ved arbeid i høyden
-Montering, endring og demontering
-Rør og kobling
-Vindkrefter, beregning for vindkrefter og forankring
-Sikkert arbeid i høyden, risikovurdering og fallsikring
-Diverse stillaskonstruksjoner
-Beregninger

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis/

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course covers the following topics:

- Which companies should have a Working Environment Committee (AMU)?
- How to organize the a Working Environment Committee (AMU)?
- What is a Working Environment Committee (AMU)?

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Hvordan arbeide sikkert i høyden og unngå fallskader? I følge Arbeidstilsynet er fall en av de vanligste årsakene til skader og dødsfall på arbeidsplasser. Derfor er det viktig at arbeidsgiver kartlegger farer og vurderer risikoen, og sørger for at arbeidstakere får tilstrekkelig opplæring slik at arbeidet foregår på en sikker måte. Eksempler på arbeid i høyden kan være arbeid på tak og i stige, stillasarbeid, arbeid i personløfter (lift) og arbeid på spinkle underlag med fare for å falle igjennom. Kurset gir en overordnet innføring i regelverk og bruk av utstyr og passer godt for arbeidsgivere og ledere som skal føre tilsyn ved arbeid i høyden.

Hensikt:

Kurset skal gi en overordnet innføring til ansvarlige arbeidsgivere og ledere som skal føre tilsyn ved arbeid i høyden samt at det utøves sikker bruk, kontroll og vedlikehold av ulike typer stillas, stiger, lift og fallsikringsutstyr på arbeidsplassen.


Innhold:

Følgende emner blir bl.a. gjennomgått:

Lover og forskrifter

Bruk av stige

Bruk av stillas

Bruk av lift

Fallsikringsutstyr

Arbeid på tak

Fallforebyggende og fallforhindrende

Kontroll og vedlikehold, daglig og periodisk

Hver leksjon inneholder en video.


This course is only available in Norwegian.

Who is this course for?

Personnel requiring an awareness or understanding of (Material) Safety Data Sheets ((M)SDS) for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the structure and information contained in Safety Data Sheets.

How will this course benefit my company?

By ensuring you have an overview of Safety Data Sheets and how your role may require to understand certain information contained in the sheets.

What standards are referred to in this course?

Chemicals (Hazard Information and Packaging for Supply) Regulations 2009

CLP Regulation

REACH Regulation

Control of Substances Hazardous to Health (CoSHH) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Norwegian authorities demand that everyone using personnel lifts must have documented training in the use of lifts. It is the employers’ responsibility to provide such training for their employees. (See “Regulations concerning the performance of work” nr. 1357, § 10-2)

Objective:
The course provides theoretical knowledge in the use of personnel lifts and raises the awareness of risks and ways to mitigate these.

Themes discussed:
- Law and regulation
- Operation
- Types of lifts and their usage
- Maintenance and control
- Classification
- Unwanted incidents and risks 

Every lesson contains a video presentation.

The course covers the following topics:

- Agreement on Inclusive Working Conditions
- Working environment and prevention
- Absence

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

The course covers the theoretical part of training the hooker and signaler. The course will provide you with basic theoretical knowledge about the correct selection, control, use and maintenance of various types of lifting equipment. (Regulations on the performance of work § 10-1 and § 10-2).

The course includes these topics:

• Lifting equipment, words and expressions

• Hooking and center of gravity

• Lifting tables

• Fiber slings

• Chain gear

• Steel rope slings

• Shackles

• Eye bolts and eye nuts

• Signals and signs, load management

• Safety rules

• Exercises

• Final test

Provided in association with Astutis, approved centre 1857.

IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams.

It enables organizations to demonstrate a commitment to health and safety standards by ensuring managers and supervisors are aware of their responsibilities and the positive actions they can take to ensure a safe a healthy working environment.

On completion of the course, learners will be able to:

• Understand your responsibilities for safety in the workplace.

• Recognise common workplace hazards and implement appropriate control measures.

• Estimate, evaluate and reduce risk by applying a hierarchy of risk control.

• Undertake structured risk assessments and accident investigations.

• Understand the requirements of HSE legislation.

• Recognise different ways to measure and improve health and safety performance.

Kurset vil gi kranoperatører en god teoretisk grunnopplæring på bro og traverskraner slik at uhell og ulykker i forbindelse med løfteoparsjoner unngås. Opplæringen gir kandidatene god innsikt i prinsippene for traverskraners konstruksjon,virkemåte, vedlikehold og bruk. Ved bestått teoretisk og praktisk prøve, vil det gi grunnlag for utstedelse av kompetansebevis G4 Bro-og traverskraner.

Kursinnhold
- Innledning med krav til kranførerer
- Bruksområder for traverskraner
- Ulykker med bro- og traverskraner
- Oppbygging av forskjellige typer bro- og traverskraner
- Elektrisk anlegg på bro- og traverskraner
- Sikkerhetsbrytere 
- Ståltau / blokk 
- Sertifisering / dokumentasjon
- Kontroll og vedlikehold, sikkerhetsregler ved bruk

- Øvingsoppgaver 

- Eksamen

Modul 2.7 (16 timer) G4- Bro- og Traverskran 

Modul 3.7 - G4 (8 timer) Praktisk bruk

This course is only available in Norwegian.

Grunnleggende opplæring i arbeidsmiljø og HMS for verneombud, medlemmer av AMU (arbeidsmiljøutvalget), ledere, arbeidsledere og tillitsvalgte. Kurset tilfredsstiller kravene i AML § 6-5 til opplæring av verneombud.

Kursinnhold
- Arbeid med og innføring i Arbeidsmiljøloven
- Hovedprinsipper i helse-, miljø- og sikkerhetsarbeid
- AMU
- HMS system (internkontroll)
- Arbeidsgivers og arbeidstakers plikter
- Psykososialt arbeidsmiljø
- Fysisk arbeidsmiljø
- Sykefravær og arbeidsmiljø
- AKAN
- Inkluderende arbeidsliv
- Varsling

This course is only available in Norwegian.

Course Goal:  This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives

LO1 Outline the extent of the problem of slips, trips and falls at work

LO2 Identify the causes of slips, trips and falls

LO3 Describe the importance of following regulatory requirements to help reduce the risk of slips, trips and falls occurring

LO4 Explain the duties of employers in preventing slips, trips and falls in the workplace

LO5 Explain the hierarchy of controls in preventing, and reducing, the risk of slips

LO6 Explain the actions that can be taken to prevent and reduce the risk of trips

LO7 Explain the responsibilities of employees in preventing slips, trips and falls

Stress is our body's way of responding to physical, emotional, or mental demands. Although typically associated with negative circumstances, stress can be caused by both good and bad experiences. Our bodies react to stress by releasing chemicals into the blood to give us energy and strength to handle the situation. This evolutionary reaction can be a good thing when stress is caused by real physical danger; however, this survival response can wreak havoc if it builds up without a proper outlet. This interactive online course discusses signs and symptoms of stress, and explains the physical and emotional effects of built up stress, such as pain and anxiety. The course also describes stress management techniques, treatment options, and lifestyle changes to help alleviate stress.

Norwegian authorities demand that employees who need to use fall protection equipment in their line of work have been given sufficient training in the use of this equipment. It is the employer’s responsibility to ensure the employees have received this training. The course provides basic theoretical knowledge of fall protection measures and equipment.

Objective:
The course gives insights into fall theory and common fall protection methods and equipment. It raises safety awareness and helps prevent accidents and injuries at the workplace.


Themes discussed:
- Why falling accidents happen
- Laws and regulations
- Risk assessment
- Safe job analysis
- Equipment choices
- Rescue plan

Every lesson contains a video presentation.

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i Excel 2013. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye verktøyene. E-læringskurset inneholder 52 opplæringsvideoer.

Kursinnhold

- Redigering 

- Formler 

- Formatering 

- Funksjoner 

- Diagram 

- Lister og tabeller

- Flere regneark 

- Utskrift