Course catalogue

Who is this course for?

This course is relevant for all personnel who may affect or be affected by cyber security.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide learners with an introduction to cyber-security and cyber-risks, and how by improving personal awareness of cyber-risks can improve cyber-security overall.

How will this course benefit my company?

By ensuring you are aware of the cyper-risks. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel who require an awareness of the hazards involved in working at height.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By increasing your awareness of the potential hazards of working at height and the steps that can be taken to reduce your risk of injury.

How will the course benefit my company?

This course is aligned to industry best practice and aims to make personnel aware of the potential hazards of working at height and the controls that can be implemented to reduce risk.

What standards are referenced in the course?

Work at Height Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accredidation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for? 

This course is aimed at personnel who do not routinely process personal data.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

Complying with the GDPR is mandatory for organisations processing personal data in the EU or EEA and for organisations processing the personal data of EU and EEA residents from abroad. This course raises awareness of the principles and rights enshrined in the GDPR and the obligations organisations have to comply with it.

How will the course benefit my company?

It will ensure you have an awareness of the principles and rights in the GDPR and their importance.

What standards are referenced in the course? 

• The EU General Data Protection Regulation (GDPR)

Is there an assessment?

No

Who is this course for?

All personnel who may be exposed to asbestos at, or above, the permissible exposure levels, and personnel who perform housekeeping or maintenance operations in areas that have asbestos-containing materials and potential asbestos-containing materials.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an understanding of the hazards associated with exposure to asbestos.

How will this course benefit my company?

This course will benefit a company by ensuring learners have the knowledge to protect themselves from exposure to asbestos.

What standards are referred to in this course?

The Asbestos Industry Regulations 1931

Asbestos (Prohibitions) Regulations 1985

Control of Asbestos Regulations

The European Union’s directive

Is there an assessment?

Yes.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for:
This course is for users of scaffolding as a work platform in accordance with § 17-5 in ‘Regulations concerning the Performance of Work’.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
By providing you with a good understanding of the principles to do with the construction, functioning, maintenance and use of scaffolding, so that incidents and accidents can be avoided.

How will this course benefit my company?

By making scaffolding users aware of responsibility, legislation, safe use of scaffolding, assembly, and the scaffolding types.

What standards are referred to in this course?
§ 17-5 in ‘Regulations concerning the performance of work’

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
All employees.

Is previous experience required?
No prior knowledge or experience is required to complete this course.

How will this course benefit me?
The course will help learners become aware of aspects relating to anti-corruption and anti-bribery as well as providing an overview of the relevant legislation. 

How will this course benefit my company?
By ensuring learners are aware of aspects relating to anti-corruption and antibribery.

What standards are referred to in this course?

• United Nations Convention against Corruption (UNCAC)

• OECD Anti-Bribery Convention

• US Foreign Corrupt Practices Act

• US Foreign Corrupt Practices Act (FCPA)

• UK Bribery Act

• German Anti-Corruption

• Norwegian Penal Code

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who could potentially be exposed to noise in the workplace. 

Is previous experience required?

No previous knowledge or experience is required to complete this course.

How will this course benefit me?

This course aims to provide personnel with the knowledge required to understand the hazards and controls associated with noise in the workplace.

How will this course benefit my company?

By ensuring personnel are aware of the hazards posed by noise in the workplace and the controls that should be put in place to minimise their exposure and reduce the risk of hearing loss.

What standards are referred to in this course?

Control of Noise at Work Regulations

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

This course is aimed at personnel working in the energy and maritime sectors.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Dropped objects can cause serious injuries as well as damage to assets and equipment. This course will give you a basic understanding of the common causes of dropped objects, their potential consequences and how they can be prevented.

How will this course benefit my company?

By ensuring that personnel are aware of the risk dropped objects present, their common causes and how they can be prevented.

Is there an assessment?

Yes

Accreditation:

CPD, IOSH 

- This course is approved by the Institution of Occupational Safety and Health (IOSH).

- IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?

Everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring knowledge or awareness of HAZID.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all personnel with solid hazard identification awareness to enable them to evaluate hazards quickly and effectively so that they can carry out their duties as safely as possible. 

How will this course benefit my company?

By ensuring you are able to evaluate hazards quickly and effectively so that you can carry out your duties as safely as possible. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This HSE Chemicals training course is for personnel who require an introduction to or awareness of working with chemicals in the oil and gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The course is for all those who work with or can come in contact with chemicals. The course is also intended for those who work on a general basis with workplace environment issues, purchasing, or transportation. The course will give the target group fundamental knowledge of safe use of chemicals.

How will this course benefit my company?

By ensuring you have fundamental knowledge of the safe use of chemicals.

What standards are referred to in this course?

• REACH

• The Working Environment Act 

• The Product Control Act 

• The Pollution Control Act

• The Chemical Labelling Regulations

• Regulations relating to Organisation, Management and Participation

• The Internal Control Regulations

• Performance of Work Regulations

• The Product Control Regulations

Is there an assessment?

Yes

Who is the course for?

All personnel who may be exposed to Naturally Occurring Radioactive Material (NORM) in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents.

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

All relevant personnel.

Is previous experience required?

No experience is required to complete this course.

How will the course benefit me? 

Learners will gain knowledge about ergonomic principles that can help prevent musculoskeletal disorders, reduce the risk of injuries, and promote overall physical well-being.

How will the course benefit my company? 

Learners will be able to describe ergonomic principles that will help in creating safer work environments, reducing the risk of workplace injuries.

What standards are referenced in the course? 

• The Norwegian Working Environment Act

• The Regulations on Organisation, Management, and Participation

Is there an assessment? 

Yes

Learning Objectives:

• Explain what ergonomics is and its significance in the workplace

• Identify the correct ergonomic working techniques 

• Explain the importance of the environment in improving ergonomics

• Identify additional measures to improve ergonomics

• Recognise who is responsible for reducing workplace injuries

Who is this course for?

Personnel who are involved in work processes that can result in hand-arm vibration exposure.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will benefit learners’ by making them aware of the risks of hand-arm vibration and the effects that it can cause.

How will this course benefit my company?

This course will benefit companies’ by ensuring that personnel have an understanding of the risks of hand-arm vibration and in turn will reduce the number of injuries that result from this.

What standards are referred to in this course?

Health and Safety Executive (HSE)

Control of Vibration at Work Regulations

Supply of Machinery (Safety) Regulations

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who are at risk from slips, trips and falls.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

How will the course benefit my company?

This course will benefit companies' by reducing slip, trip and fall injuries among personnel.

What standards are referenced in the course?

• Health and Safety at Work Act

• Management of Health and Safety at Work Regulations 

• Workplace (Health, Safety and Welfare) Regulations 

• Health and Safety Executive (HSE)

Is there an assessment?

Course assessment with a 80% pass mark and two attempts.

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All people exposed to noise in their daily work.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

The purpose of the course is to prevent noise-induced hearing impairment. You will learn how loud sound and noise affect us. You will also learn how you can properly protect yourself against noise and why that is so important.

How will the course benefit my company?

This course will benefit your company be ensuring that you are familiar with the safety precautions you should take in the workplace to protect your hearing.

What standards are referenced in the course?

The course is based on the current rules and regulations for working in areas where there is a risk of being exposed to noise that may be damaging to health.

Is there an assessment?

Yes

Who is this course for?

This course is suitable for personnel at all levels within an organisation.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company.

How will this course benefit my company?

By ensuring awareness of common values that govern responsible corporate practice and personal behaviour in a company.

What standards are referred to in this course?

• The US Foreign Corrupt Practices Act (FCPA)

• The UK Bribery Act

• The OECD Convention on Combating Bribery of Foreign Public Officials

• The UN Convention Against Corruption

• The Norwegian Equality and Anti-Discrimination Act

• The EU antitrust law

• The US antitrust law

• The Norwegian Transparency Act

• The International Bill of Human Rights

• The UN Guiding Principles on Business and Human Rights

• The International Labour Organization (ILO) Declaration on Fundamental Principles and Rights at Work

• The UK Modern Slavery Act

• The UK Employment Act

• The UK Equality Act

Is there an assessment?

Yes

This course relates to how best practice, your attitudes, behavior and knowledge can prevent dropped objects and enhance the safety of you and your colleagues.

The content of this course is in compliance with Working Together for Safety’ handbook; Best practice - Dropped object Prevention. The course is developed by the same personnel who also developed collaboration for safety's handbook, Best practice - Dropped object Prevention, under the auspices of Equinor, a team with decades of experience within prevention, identification and controlling of dropped objects throughout the oil and gas industry.

Course Content
- Securing devices
- Securing of tools
- Securing of equipment
- Inspection, observation and follow-up checks

Contact BLH-DOM Safety Solutions AS for more information:
Tel.: +47 51 81 40 00
E-mail: post@blh-dom.com

The e-learning course, “Fire Prevention during Hot Work”, has been quality controlled by the Norwegian Fire Prevention Association and designed is to satisfy the requirements set by the insurance industry.

The course aims to reduce the number of fires caused by hot work and improve knowledge about the risk of fire during hot work.

Please Note! 

- Practical training must be completed within 3 months of (before or after) the eLearning

- Proof of practical is required to be sent to learningcentre@mintra.com

- Approved practical instructors list is available here https://www.brannvernforeningen.no/sertifisering/varme-arbeider/instruktorsok

- If these conditions are not met, Mintra cannot apply for your certificate

- You may be required to repeat the eLearning or practical again if conditions are not met in full

- Digital Certificates are issued from the Norwegian Fire Prevention Association (included in course fee)

- Plastic card certificates will incur an extra fee of NOK 450

- Further details on these notes are available in the attached document

Hot work documentation

You will be required to confirm your identity online before starting this course. In Trainingportal, we have implemented a fully automated process to make this a quick and painless experience.

Course Contents

The course focuses on duties and responsibilities during hot work and is divided into the following topics: 

- Hot work
- Regulations
- Fire theory
- Extinguishing fires
- Dangers of hot work
- Risk identification and preventive measures
- Documentation of safety
- If a fire starts

Who is this course for?

This eLearning course is aimed at individuals required to work using display screen equipment, such as a computer, laptop or tablet.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will give you a basic understanding of the key health risks associated with display screen equipment and what you can do to mitigate them.

How will this course benefit my company?

By ensuring you are fully aware of how to avoid injury while working at your computer, you can help reduce the number of lost workdays and hours due to health issues.

What standards are referred to in this course?

Health and Safety (Display Screen Equipment) Regulations

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who may be exposed to nitrogen in the workplace.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to provide learners with an awareness of nitrogen and provide best practice for work involving nitrogen in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel understand the best practice when working with nitrogen in oil and gas producing facilities.

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations 

Health and Safety Executive (Health and Safety Executive (HSE)

The Occupational Safety and Health Administration (OSHA)

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

This course is aimed at executives and managers to help them understand the strategic importance of CSR, align it with business goals, and make informed decisions related to sustainability and social responsibility.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

Learners will acquire a thorough understanding of CSR principles and practices across social, environmental and governance dimensions. Participants will gain insights into global sustainability considerations, ensuring that they are well-informed about the broader impact of corporate activities.

How will the course benefit my company?

The course addresses undesirable activities and provides guidelines on ethical decision-making, helping a company mitigate potential legal, financial and reputational risks.

What standards are referenced in the course?

• The UN Guiding Principles on Business and Human Rights

• The International Labour Organization – ILO – Core Conventions

• The United Nations’ Principles for Responsible Investment (PRI)

• The Principles for Sustainable Insurance (PSI)

Is there an assessment?

Exam in TP with 80% pass mark with two attempts. 

Who is this course for:
All employees working in ISPS-areas.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Basic knowledge of ISPS rules and regulations applicable to international ports and harbours. The course objective is to raise awareness of possible threats to international ports and harbours. Completed course normally gives access to ISPS-areas on harbours.

How will this course benefit my company?
By ensuring you have the knowledge related to ISPS rules and regulatins applicable to international ports and harbours.

What standards are referred to in this course?
ISPS code

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide an overview of best practice in relation to drug and alcohol awareness in the workplace.

How will this course benefit my company?
This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Everyone working on low voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low voltage installations.

What standards are referred to in this course?

§ 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE".

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
The United Kingdom’s UK’s Health and Safety Executive’s Regulation 253 ‘The safe isolation of plant and equipment’.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
This course is aimed at personnel who routinely process personal data, such as IT or HR staff.

Is previous experience required?
You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?
Complying with the GDPR is mandatory for organisations processing personal data in the EU or EEA and for organisations processing the personal data of EU and EEA residents from abroad. This course introduces the principles and rights enshrined in the GDPR and the obligations organisations have to comply with it.  

How will this course benefit my company?
It will ensure you have an awareness of how you and your organisation must comply with the GDPR.

What standards are referred to in this course?
The EU General Data Protection Regulation (GDPR)

Is there an assessment?
Exam in TP with 80% pass mark with two attempts.

The course covers the following topics:

- What is psychosocial working environment?
- Characteristics of good and poor psychosocial environment
- Roles and responsibilities
- Prevention

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is this course for:
This course is designed for electrical personnel in various industries, including electricians, maintenance workers, facility managers, engineers, and safety professionals, to ensure they can work safely around electrical systems and equipment.

Is previous experience required?
This course is for qualified or instructed personnel.

How will this course benefit me?
By ensuring that the learner is equipped to identify and avoid electrical hazards, reducing the risk of electrical accidents and injuries.

How will this course benefit my company?
A reduction in workplace accidents related to electrical hazards that can lead to injuries, medical expenses, and potential legal liabilities.

What standards are referred to in this course?
FSE Regulations

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Obligatory working environment training for safety deputies and union officials, completed as e-learning combined with classroom training. 

The course provides basic working environment training in accordance with the main contract between The Norwegian Confederation of Trade Unions (LO) and The Confederation of Norwegian Enterprise (NHO).

Course Content

E-learning

Interactive exercise sequences, video clips, and animations are used to illustrate the topics.

The course provides insight into why HSE work is important, using The Working Environment Act as a tool.

Knowledge of roles and responsibilities in relation to the working environment.

Using systematic methods for improving the working environment and for solving working environment issues.

Classroom Training

This internal company gathering can be conducted and organised by the company itself, or in collaboration with Mintra/The Federation of Norwegian Industries. If you would like Mintra/The Federation of Norwegian Industries to conduct the training, a minimum of 10 people must be enrolled.

If your company would prefer to conduct the training, relating content to internal routines and conditions, Mintra will contribute with documentation and information that describe activities related to this training. 

Contact us to find a suitable implementation model!

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.

What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The Working Environment Act, section 3-5, obligates employers and executives to complete HSE training. This course satisfies the requirements for HSE training for executives and managers.

The course contains the following modules: 

• A working life changing

• The Working Environment Act

• Risk Managament

• Healthy enough to work?

• Systematic HSE work

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

“Course on fall protection” is a course on the basics of fall protection for anyone working above ground.

This course outlines the laws and regulations related to fall protection. It contains information about active as well as passive protection gear, as well as first aid related to falls from a height. Upon completion of the course one will have information about the various aspects of fall protection. One will also learn how to carry out ones work in a safe and secure manner within the confines of the applicable laws and regulations.

Course Content

- Laws and regulations

- Active and passive fall protection

- First aid

Who is the course for?

All relevant personnel.

Is previous experience required?

No experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of US best practice in relation to drug and alcohol awareness in the workplace.

How will the course benefit my company?

This course provides drug and alcohol awareness, information on company abuse, illegal drug use, and the abuse of prescription drugs. 

What standards are referenced in the course?

N/A

Is there an assessment?

Yes

Learning Objectives:

• Identify various types of common drugs

• Find company policies on alcohol and controlled substances

• Explain the various methods of alcohol and drug testing

• Explain the consequences of violating company drug and alcohol use policies

• Describe the effects of alcohol and drugs on the body and job performance

Who is this course for?

Personnel requiring an awareness and understanding of common storage and handling methods for explosives.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of the requirements for storing, transporting and handling explosives.

How will this course benefit my company?

By ensuring you have an overview of the requirements for storing, transporting and handling explosives.

What standards are referred to in this course?

Regulation 2 ER2014 

International Carriage of Dangerous Goods by Road (ADR)

United Nations Classification of Explosives

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who work in a role within the Oil and Gas Industry that may have an impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to the issues involved with successful environmental management in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the issues involved with successful environmental management in the Oil and Gas Industry, which will help to protect the environment.

What standards are referred to in this course?

• Department of Energy and Climate Change (BEIS (formally DECC))

• The Scottish Environment Protection Agency (SEPA) in Scotland

• The Environment Agency (EA) in England, Wales and Northern Ireland

• ISO 14001 Environmental Management Systems (EMS)

• British Standard Institute's BS7750 - Specification for Environmental Management Systems (BS11994)

• Integrated Pollution Prevention and Control (IPPC) Directive

• Control of Major Accident Hazards (COMAH) Regulations

Is there an assessment?

No

Who is this course for?

Personnel requiring an awareness or understanding of the change management process.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

How will this course benefit my company?

By ensuring you have an overview of the management of change process.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians and Maintenance Personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

How will this course benefit my company?

By ensuring you have an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

What standards are referred to in this course?

Minimum Efficiency Reporting Value (MERV)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Fall protection is a course on the basics of fall protection for anyone working above ground.

This course outlines the laws and regulations related to fall protection. It contains information about active as well as passive protection gear, as well as first aid related to falls from a height. Upon completion of the course one will have information about the various aspects of fall protection. One will also learn how to carry out ones work in a safe and secure manner within the confines of the applicable laws and regulations.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

Who is this course for?

All employees at all levels of the organisation.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.

This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions. 

How will this course benefit my company?

By ensuring you are aware and have a basic understanding of what risk is and how to manage risk. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice. 

Is there an assessment?

There is no exam upon completion of this course.

Who is this course for?

Any personnel who require an awareness of human factors.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to introduce learners to the concept of human factors and how they impact situational awareness.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an understanding of the human factors that can affect their situational awareness, resulting in reduced accidents and injuries.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

No

This course provides an introduction to emergency first aid. After completing the course, users will feel secure enough in their knowledge to be able to take action in an accident situation by analyzing the situation and understanding the order in which to do what needs to be done.

Course Content

- Introduction

- Lifesaving first aid
- To call for help
- The important survey
- Stroke
- Cardiac Resuscitation
- Heart Disease
- Internal and external bleeding

Course Goal: To increase learners’ awareness of the risks of hand-arm vibration and the effects that it can cause. The course also looks at the control measures that should be taken to reduce exposure to vibration, based on industry best practice.

Who is the course for?

All onshore and offshore personnel that use vibration-inducing equipment.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning objectives

LO1 Describe hand-arm vibration and the effects it can cause 

LO2 Explain what Hand-Arm Vibration Syndrome (HAVS) is and how to identify its early symptoms

LO3 Identify the types of jobs and equipment that are most likely to involve hand-arm vibration and expose workers to the risk of health effects

LO4 Explain the duties of employers under the Control of Vibration at Work Regulations

LO5 Outline the measures that employees can take to reduce the risk of HAVS

LO6 Outline the duties of equipment manufacturers and suppliers in reducing vibration risks

LO7 Describe the process of assessing the vibration risk to employees in accordance with the Exposure Action Value (EAV) and Exposure Limit Value (ELV)

LO8 Describe the control measures that should be taken to reduce exposure to vibration

LO9 Explain the importance of monitoring exposure to vibration, and health surveillance

LO10 Explain the importance of information and training in reducing the risks to health from vibration

The course is a management support and provides an introduction to Risk assessment, HSE regulations and Training requirements. The course is also helpful for everyone involved in the training of hazardous work equipment.
The course is intended to give participants an introduction to the HSE regulations, and requirements for training, especially relating to dangerous tools.