Course catalogue

Who is this course for:
Maritime personnel, onshore and offshore.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
The course looks at the purpose of the ISM Code, which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will this course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM Code.

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code 

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

The International Safety Management (ISM) Code 

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace. 

Learning Objectives

LO1  Explain the principles of, and steps involved in, the Risk Assessment process

LO2  Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes 

LO3  Identify a typical Risk Assessment form    

LO4  Explain the requirements of the Risk Assessment team 

LO5  Recognise and explain Risk Assessment terminology

LO6  Identify the different steps within the Risk Assessment process 

LO7  Identify common, industry-specific hazards

LO8  Determine the appropriate level of Risk Assessment that may be required

LO9  Explain how to use a Risk Matrix to evaluate the level of risk

LO10  Explain how to identify appropriate control measures based on the Hierarchy of Control

LO11  Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’

LO12  Describe what to do if any Residual Risk remains too high

LO13  Explain how to carry out a Personal Risk Assessment and recognise its importance before each task 

LO14  Explain the importance of Dynamic Risk Assessment  

LO15  Identify situations where ‘Stopping the Job’ may apply

LO16  Explain the importance of communicating the outcomes of a Risk Assessment  

LO17  Understand the importance of communicating ‘Lessons Learned’

Course goal: This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

Learning Objectives

LO1 Define what is meant by Personal Protective Equipment (PPE)

LO2 Identify the different types of PPE 

LO3 Identify typical regulatory requirements associated with PPE

LO4 Describe the Hierarchy of Control measures and the use of PPE in relation to this

LO5 Explain the requirement for assessing the suitability and compatibility of PPE

LO6 Explain the maintenance requirements for PPE

LO7 Describe the duties and responsibilities of employees in relation to PPE

LO8 Explain the importance of PPE-related training, information and instruction

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel involved in marine operations.

Is previous experience required?

No experience is required to take this course.

How will this course benefit me?

By ensuring you know how to respond to marine trash and debris incidents.

How will this course benefit my company?

By ensuring you know how to respond to marine trash and debris incidents.

What standards are referred to in this course?

US best practise.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel, including Work Party members, Performing Authorities and Area Authorities.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with guidance and useful techniques to help you carry out effective Toolbox Talks.

How will this course benefit my company?

Communication is vital to workplace safety. This course aims to provide personnel with the knowledge and techniques required to carry out effective Toolbox Talks.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of US best practice for protecting hearing from noise hazards.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of noise hazards and their effects on you.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US specific ways to protect from noise hazards.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel, on and offshore, who require an awareness of effective waste management.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

To be able to manage waste properly, it is important that all personnel know the laws and regulations that apply and how to effectively minimise and manage waste.

How will the course benefit my company?

By providing personnel with the knowledge they need in order to minimise and manage waste effectively.

What standards are referenced in the course?

• The Pollution Control Act

• ISO 14000 

• EMAS (Eco-Management and Audit Scheme)

• Forurensningsloven

• ISO 14000

• EMAS (Eco-Management and Audit Scheme)

Is there an assessment?

End of course TP-assessment with a pass mark of 80% and 2 attempts.

Course goal: This course provides learners with an awareness of the COSHH regulations, and how they control work with hazardous substances.

Learning Objectives

LO1 Explain the COSHH regulations and their applicability to the Oil and Gas Industry

LO2 Explain the legal obligations under COSHH for both employees and employers, and explain the REACH regulations

LO3 Explain the health effects of working with hazardous substances, and the various ways that these can enter the body

LO4 Explain the use of Safety Data Sheets, Labels and Assessments within the COSHH regulations

LO5 Explain the common labelling system and identify the standard symbols

LO6 Explain the appropriate use of Personal Protective Equipment

LO7 Explain requirements for storage, handling and disposal of hazardous substances

LO8  Define the control measures for handling hazardous substances and explain the control hierarchy

LO9 Explain the process for dealing with hazardous substances in the event of a spill

LO10 Define the recording and reporting process within the COSHH Regulations

Who is this course for?

Personnel requiring awareness or undertanding of LOTO in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

To ensure that relevant personnel have a common and consistent approach to industry best practice in relation to US LOTO controls.

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to LOTO controls.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who could potentially be exposed to H2S in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

How will this course benefit my company?

By ensuring you are aware of the hazards and controls associated with H2S exposure, which will in turn reduce incidents and accidents offshore.

What standards are referred to in this course?

Occupational Safety and Health Administration (OSHA)

US National Institute for Occupational Safety (NIOSH)

American Conference of Government Industrial Hygienists (ACGIH)

Is there an assessment?

Yes

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course aims to provide learners of an awareness of US best practice in relation to confined space entry (CSE), hazardous atmospheres, and the necessary equipment, and permits required to work in confined spaces.

It will also examine the hazards and hazard control methods that are required to undertake work safely in a confined space and the actions that should be taken in an emergency.

Learning Objectives

LO1  Explain what is meant by a Confined Space

LO2  Give examples of Confined Spaces

LO3 Describe the dangers that can be caused by confined space entry work 

LO4 Identify OSHA requirements for permit-required entry operations

LO5 Explain how to avoid entering confined spaces

LO6 Explain the importance of having a Safe System of Work in place

LO7 Describe individual roles and responsibilities involved in Confined Space Entry work 

LO8 Explain the requirements for gas testing

LO9 Identify acceptable levels for atmospheric test results 

LO10  Give examples of Confined Space Entry site safety equipment

LO11  Explain the actions to take in an emergency 

LO12  Explain Confined Space Entry alarm procedures

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

Who is this course for?

All employees at all levels of the organisation.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.

This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions. 

How will this course benefit my company?

By ensuring you are aware and have a basic understanding of what risk is and how to manage risk. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice. 

Is there an assessment?

There is no exam upon completion of this course.

Course Goal:

This course aims to increase the learner's awareness of US best practice in relation to Personal Protective Equipment (PPE), and outline the responsibilities of employers and personnel in relation to PPE.

Learning Objectives

Section 1: The Importance of PPE

LO1 Define what is meant by Personal Protective Equipment (PPE)

LO2 Identify the regulations surrounding the use of PPE

LO3 Describe the Hierarchy of Control measures

LO4 Describe the duties and responsibilities of employers in relation to PPE

LO5 Explain the importance of PPE-related training, information and instruction 

LO6 Describe the responsibilities of personnel in relation to PPE

Section 2: Types of PPE

LO7 Identify the different types of PPE 

LO8 Describe how to select, use and maintain different types of PPE

Section 3: PPE Requirements

LO9 Identify different types of Respiratory Protective Equipment (RPE)

LO10 Explain the requirements for face fit testing

LO11 Explain the requirements for the use of fall protection

LO12 Explain the requirements for assessing the suitability and compatibility of PPE

LO13 Describe the four levels of PPE protection

LO14 Explain the importance of proper donning and doffing techniques

Course Goal:

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

Learning Objectives:

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Who is the course for?

This course is for any person who interacts with, or is responsible for, the specification, design, operation and maintenance of assets that employ safety instrumented systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an awareness of the purpose and nature of safety systems deployed to protect people, the environment and plant in the areas that you work.

How will the course benefit my company?

By ensuring personnel have an understanding of safety instrumented systems.

What standards are referenced in the course?

IEC 61508

IEC 61511

IEC 62061

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Maritime personnel who may be affected by potential baggage searches.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide an introduction to personnel and baggage searches in the Maritime Industry.

How will this course benefit my company?

By ensuring you are aware of the personnel and baggage searches which might be carried out. 

What standards are referred to in this course?

SOLAS ch. 11 - ISPS code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.