Course catalogue

Very few leaders are born with the qualities required to inspire and lead others. Most leaders are built—through personal effort, lots of introspection, and assistance from mentors and other leaders. In this course, you’ll learn the six characteristics that set effective leaders apart. You’ll discover the differences between managing and leading, and when to do each. And you’ll find out how to create a plan that will help you move from simply managing results to setting vision and leading others.

• Differentiate between managing and leading  

• Create leadership development action plan

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general
• Use of work equipment
• Selection of work equipment
• Training in the use of work equipment
• Workspaces and personnel requirements
• Risk assessment
• Safety, accidents and liability
• Direct and underlying causes of accidents
• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

It is a law of nature, if you work with people, you’re going to have conflict. When people with different viewpoints, backgrounds, personalities, work ethics, and industry experience come together, discord and differences of opinion are inevitable. Wise leaders accept that conflict is a part of work, they anticipate it, and they have a plan to address it. Effective conflict resolution takes practice. You may want to ask an experienced colleague, your HR department, or your manager for suggestions on dealing with this issue. Just realize that while you can’t avoid conflict entirely, you can establish an environment and a process that minimize the damage conflict can cause. 

If managed well, conflict can lead to innovation, stronger teams, and greater personal development—for you and your employees. 

• Become aware of workplace conflicts 

• Set a protocol to handle conflicts

Presentation 

This training course provides a general introduction to dynamic positioning systems, which are computer-controlled systems that automatically maintain the vessel's position and heading by using their propellers and thrusters. 

Objectives 

On completion of the training, students will be able to: 

Get familiar with dynamic positioning systems. 

Know the main components of dynamic positioning systems, equipment used and installation. 

Know the Class requirements in terms of surveys and tests of dynamic positioning systems 

Program 

History 

Characteristics and scope of DP systems 

Applications 

Equipment class 

Classification notations 

System configuration: power system, thruster system, control system, position reference systems, computer system, display system 

Redundancy 

o Redundant systems 

o System failures 

o Redundancy concept 

o Terms 

o Single fault tolerance 

o FMEA 

Design environment 

Essential non-DP systems 

Performance analysis 

Operational requirements 

System components 

o Power system 

o Thruster system 

o DP control system 

o Position reference system: acoustical, taut-wire and other reference systems 

Scope of DP surveys 

o Inspections at works 

o Surveys during construction, tests and trials 

o Surveys during operation: Annual and Renewal surveys, operational test, Occasional surveys

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to DP System awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to DP System, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

E-læringskurset gjør deg i stand til å komme raskt i gang med programmene i Office 2013. Her får du opplæring i bruk av Word 2013, Excel 2013, PowerPoint 2013 og Outlook 2013, samlet i ett og samme e-læringskurs. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene. E-læringskurset inneholder 70 opplæringsvideoer.

Kursinnhold
Innføring i Word 2013, Excel 2013, PowerPoint 2013, Outlook 2013.

The course is only available in Norwegian.

Accountability is an individual’s acceptance of responsibility for the outcome of a job, project, or program. There are five steps that you can use to engineer accountability into both, your work processes and your employees to achieve performance goals.

• Define accountability 

• Describe the five steps to accountability 

• Apply the five steps of accountability

In today’s competitive world, businesses move faster and faster to stay ahead of the competition, develop new offerings, and keep up with client demands, employees need constant feedback, support, and direction in order to achieve those objectives. The era of the annual performance review is long gone, with managers now meeting with team members frequently to set goals, coach, provide training, and review performance. Performance dashboards that automate company-wide goals, metrics, customer feedback, and other performance-related data keep leaders and team members aware of their progress. Instead of looking backward, the new model for managing and motivating employee performance is fast-paced and feedback focused.

• State the best practices to improve the performance management process 

• Explain the review model

Time is more valuable than money. You can get more money, but you cannot get more time.

-JimRohn, an American entrepreneur, author, and motivational speaker 

Meetings are necessary, but they become intolerable when they drag on and on, start late, or the discussion goes off the track. It’s annoying when you feel that your time has been hijacked—especially when other projects and responsibilities are in the pipeline. Poor time management is often the cause of this distress. Meetings would be more productive—and less irritating—if all activities started on time, ended on time, and stayed on the topic. As a leader, it is your responsibility to ensure that meetings are of benefit to the participants and satisfy the meeting objectives. Running a successful meeting can be boiled down to three things: be purposeful, be engaged, and be respectful of the attendees’ time.

• Explain the importance of adhering to meeting time 

• Interpret the impact of delaying a meeting 

• Respect others’ time

This course covers the necessary competence for being in command of a lifeboat in the event of a shipwreck or accident requiring evacuation, in other words, the entire rescue phase which consists of boarding and launching the lifeboat, moving to a safe distance from the installation and staying on the lifeboat at sea.

Course Content

- Prepare a conventional lifeboat for evacuation

- Organise and supervise embarkation

- Launch the lifeboat

- Attend to the passengers and facilitate the stay onboard after an evacuation.

- Establish and maintain communication with the rescue unit.

This course is valid for 24 months.

Kursinnhold:

Modul O-2.6

- 6 timer teori

- 13 timer praksis

- 5 timer Eksamen/evaluering

Følgende blir bl.a gjennomgått:

Teori:

- Årsaker til uønskede hendelser

- Avviksrapportering

- Risikovurdering og risikostyring

- Barrierer

- Arbeidsmiljøloven

- Vegtrafikkloven

- Forskrift om Bruk av kjøretøy

- Norsk olje og gass - retningslinje 116

- Bruk av personlig verneutstyr

- Ulike typer lastbærere, konstruksjon, funksjon og virkemåte

- Valg av lastbærere

- Brukerkontroll av lastebærere, kriterier for bruk

- Planlegging av innlastning

- Festepunkter i lastebærere

- Krefter man sikrer lasten for

- Teoretisk eksamen

Praksis:

- Korrekt bruk av personlig verneutstyr

- Egen og andres sikkerhet

- Typeopplæring på truck, inkl. relevant tilleggsutstyr

- Gjennomføre brukerkontroll av lastebærere

- Sikring av last til paller

- Planlegge innlasting og sikring av ulike typer last i ulike typer lastbærere,

   inkl. bil/transportflak/tralle

- Funksjon av lastsikringsutstyr, som fiber og kjetting

- Bruk av lastsikringsutstyr, barriere og avstemplingsmateriell

- Kontroll av lastsikringsutstyr

- Gjennomføre innlasting og lastsikring av ulike typer last i forskjellige        lastbærere

- Bruk av ulike hjelpeverktøy

- Praktisk eksamen

Eksamen/Evaluering:

- Avsluttende prøver gjennomføres selvstendig og uten hjelpemidler.

Review of the two pages from where one can register hours in OCS Self Service – Hours per week and Timesheet. Manual registration, hour generation, project pinning and approving hours. Manager’s approval of hours for employees. 

Sertifisert sikkerhetsopplæring Modul 1 for fører av kran, truck og masseforflyttingsmaskiner.

E-LÆRINGSKURS MED FØLGENDE INNHOLD:

• Bruk av arbeidsutstyr

• Arbeidsområder og krav til personell

• Risikovurdering

• HMS, ulykker og ansvar

• Direkte og bakenforliggende årsaker til ulykker

• Aktuelle lover og forskrifter

• Personbefordring

• Ytre miljø

• Farlig gods

• Øvingsoppgaver

• Kunnskapstest for bestått E-læringskurs

I forbindelse med videre opplæring i Modul 2.* og Modul 3.*, vil sertifisert opplæringsvirksomhet gjennomføre avsluttende prøve Modul 1 i tillegg til bestått e-læringskurs Modul 1.

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i regnearkprogrammet Excel 2016. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. E-læringskurset inneholder 59 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

Innhold:

- Før du starter

- Redigering

- Formler

- Formatering

- Funksjoner

- Diagram

- Lister og tabeller

- Flere regneark

- Utskrift

Kursene omfatter opplæring i sikker bruk av redningsutstyr, planlegging, organisering og risikovurdering av redningsaksjoner, samt førstehjelp ved hengetraume. Kursene innehar realistiske øvelser i hvordan det utøves redning av personer på en mest mulig effektiv og forsvarlig måte ved bruk av redningsutstyr.

Regelverksreferanse:

NOG Fagplan fallredning (og repetisjon)

Kursene omfatter opplæring i sikker bruk av redningsutstyr, planlegging, organisering og risikovurdering av redningsaksjoner, samt førstehjelp ved hengetraume. Kursene innehar realistiske øvelser i hvordan det utøves redning av personer på en mest mulig effektiv og forsvarlig måte ved bruk av redningsutstyr.

Regelverksreferanse:

NOG Kursplan taubasert fallredning

It has become increasingly clear that social media is not just a fad. It is instead, not only a massive change in the way we socialize with others in a personal setting, but also the biggest shift in how we conduct business since the arrival of the Internet. Social media is quickly altering every aspect of corporate operations, such as hiring practices, training, marketing, and even risk management.   The purpose of this course is to introduce you to social media, explore how we use social media personally vs. social media use in a business setting, how its use continues to evolve in the workplace, the benefits of social media, and of course the risks it can present to you personally and to companies.

Only in Norwegian

Målet med kurset er å gi personell grunnleggende kunnskaper om forberedelse, planlegging, utførelse og dokumentering av flensmontasje og boltetrekking på Compact flenser.

Kontrollert demontering, montering og tiltrekking av flenser, samt riktig valg av verktøy, pakninger, bolter og smøremidler, er avgjørende for å unngå ulykker, skader og tap av verdier på trykksatte anlegg.

Kursinnhold

- Introduksjon 

- Flens- og tetningsring

- Styrende dokumenter

- Verktøygjennomgang

- Demontering av compact flens

- Rengjøring og inspeksjon

- Montering og tiltrekking

- Praktiske oppgaver i verksted

- Avsluttende test

This course covers the necessary competence for being in command of a lifeboat in the event of a shipwreck or accident requiring evacuation, in other words, the entire rescue phase which consists of boarding and launching the lifeboat, moving to a safe distance from the installation and staying on the lifeboat at sea.

Course Content

After completion of the course, the students should be able to:

- Prepare a conventional lifeboat for evacuation

- Organise and supervise embarkation

- Launch the lifeboat

- Attend to the passengers and facilitate the stay onboard after an evacuation.

- Establish and maintain communication with the rescue unit.

This course is valid for 24 months

The object of this course is to motivate participants to actively contribute to a better and safer working environment. The course emphasises preventative measures that can prevent harm to people, the environment and equipment.