Course catalogue

Norske myndigheter pålegger arbeidsgiver å sikre at alle arbeidstakere har fått dokumentert opplæring i betjening av alt arbeidsutstyr som anses som farlig, eller krever særlig forsiktighet ved bruk. («Forskrift om utførelse av arbeid» nr. 1357, § 10-2 Krav om dokumentert sikkerhetsopplæring ved bruk av arbeidsutstyr.) Kurset gir en grunnleggende innføring i sikker bruk av farlig småverktøy som eksempelvis: vinkelslipere, kappsag, boltepistol og spikerpistol. Når kurset er bestått kan man laste ned kursbevis umiddelbart.

Hensikt:

Gi kursdeltakerne økt kunnskap og bevisstgjøring av sikkerhetstiltak, for å unngå personskader og ulykker på arbeidsplassen.

Innhold:

Følgende emner blir bl.a. gjennomgått:

– Oppbygging

– Betjening

– Brukeregenskaper

– Bruksområder

– Vedlikehold

– Sikker bruk og sikkerhetsregler

– Holdninger og motivasjon

– Lover og forskrifter

 

Hver leksjon inneholder en video.

 

This course is only available in Norwegian.

The ISO 45001:2018 development process began towards the end of the same year, a standard relating to occupational health and safety Management Systems. Some of the benefits of the New ISO 45001:2018 include enhancement & improvement of the workplace’s reputation as a safe place, and easier to comply with standards.

Who is the course for?

 Any individuals who are involved in the handling of dangerous goods for shipment by air.

 

Is previous experience required?

 No previous experience is required to complete this course.

 

How will the course benefit me?

 Regulations must be followed so that dangerous goods can be transported by air without endangering the aircraft, passengers or crew. This course will give you a basic understanding of the regulations for shipping dangerous goods by air, including their labelling, packing and stowage. The knowledge gained in this course will help you to stay safe while handling dangerous goods in your day-to-day activities and if there is an emergency situation. It will also outline the documentation required to accompany goods for transportation.

 

How will the course benefit my company?

 By ensuring you are fully aware of the requirements for shipping dangerous goods by air, you contribute to the safety of your workplace, your fellow workers and yourself, while enabling cargo shipments to be made safely and successfully.

 

What standards are referenced in the course?

• International Civil Aviation Organization (ICAO) Technical Instructions

• International Air Transport Association (IATA) Dangerous Goods Regulations

 

Is there an assessment? 

 Once you have completed each section, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Who is this course for?

All employees at all levels of the organisation who require an awareness of steps to take in the event of armed attack.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

The main idea behind the course is that knowledge about and reflection on what to do makes us feel more confident and able to make informed choices.  In a public area or at work, are you aware of what the premises look like, and how you can evacuate if a situation should occur? In order of priority you should act in this way; Run, Hide, Fight!

 

The course describes these guidelines in more details and also allows the user to reflect upon various aspects of an armed attack.

 

How will this course benefit my company?

By ensuring you are aware of the priorities should an armed attack occur.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

There is no exam upon completion of this course.

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.

 

 

COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.

 

 

STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management

 

 

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY? 

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment. 

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.

 

 

For more information and prices: 

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

Course Description:- The LSA and FFA Inspection Module 2 consists of five virtual tours. Here, you will be guided on how to carry out checks of various firefighting appliances, how to test various associated equipment and ensure all the equipment is ready for immediate use. This course will also show you the most frequent checks and tests carried out by various inspectors and auditors. Learning Objectives:- At the end of this course, the candidate will be able to: · Demonstrate the various checks carried out on the emergency fire pump and will be able to ensure that the emergency fire pump is compliant in all respects, ready for an inspection and ready for immediate use. · Demonstrate the various checks carried out on the Fixed foam operating system as well as the portable foam applicator and ensure it is compliant in all respects, ready for an inspection and ready for immediate use. · Demonstrate the various checks carried out on the Fixed CO2 system and will be able to ensure the CO2 system is compliant in all respects, ready for an inspection and ready for immediate use. · Demonstrate the various checks carried out on the SCBA compressor and will be able to ensure the SCBA compressor is compliant in all respects, ready for an inspection and ready for immediate use. · Demonstrate the various checks required to be carried out for various extinguishers and will be able to ensure the extinguisher are compliant in all respects, ready for an inspection and ready for immediate use. · Demonstrate the various checks to be carried out on the fire hose, the fire hose box and the coupling. The participants will also be able to demonstrate how to check the fire hose and the emergency fire pump using two fire hoses.

On completion of this course, marine professionals will know what pinch points are and where to find them. Students will also know the measures and actions that should be implemented to prevent injuries from pinch points.

Who is this course for?

Personnel at all levels of an organisation will benfit from this awareness course.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide a brief overview of the Job Safety Analysis process. 

 

How will this course benefit my company?

By ensuring you have a brief overview of the Job Safety Analysis process. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Sometimes it might be an advantage to install one or more ground planes on board. Especially if you experience noise on, for instance, the VHF radio or if some equipment is not fully functional. In some cases, there is a need for a number of separate ground planes, especially if you have multiple pieces of equipment on board that need to be grounded. In this course, you will learn what type of equipment benefits from grounding. You will learn the correct way of grounding with modern solutions suited for leisure boats. This includes modern ground plates, how to connect and install them, and which sizes to look for. After this course, you will know if grounding will be necessary for you and you will be able to safely install and connect them to your devices.

Who is the course for? 

This course is intended for all who wish to learn more about hand safety awareness.

 

Is previous experience required? 

No previous knowledge is required to take this course.

 

How will the course benefit me? 

The course will help you gain awareness of how hand injuries occur and learn simple prevention techniques.

 

How will the course benefit my company? 

The course will provide knowledge of simple procedures that can mitigate hand injury risks, such as knowing the correct PPE and understanding when and where to use it.

 

What standards are referenced in the course? 

Based on parts of the ISM Code and IMDG requirements.

 

Is there an assessment? 

Yes