$industryCaptionMap.get($model.industryId)

Course catalogue

Category

Course type

Course provider

hits

2754

Manual Handling (French subtitles) Course code: MUK-006 Course type: E-learning course Duration: 30 minutes Language: French, French (Subtit ... Who is the course for? All personnel involved in the transportation or supporting of a load by hand or bodily force. Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads. How will the course benefit my company? This course will benefit your company by reducing manual handling accidents. What standards are referenced in the course? • The Manual Handling Operations Regulations • The Management of Health and Safety at Work Regulations • Health and Safety at Work Act • Health and Safety Executive (HSE) Assessment Details Course assessment with an 80% pass mark and two attempts.
Slips, Trips and Falls FAST TRACK Course code: MUK-008-FT Course type: E-learning course Duration: 30 minutes Language: English Who is this course for? All personnel who are at risk from slips, trips and falls. Is previous experience required? No previous experience is required to complete this course. How will this course benefit me? This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice. How will this course benefit my company? This course will benefit companies by reducing slip, trip and fall injuries among personnel. What standards are referred to in this course? • Health and Safety at Work Act • Management of Health and Safety at Work Regulations • Workplace (Health, Safety and Welfare) Regulations • Health and Safety Executive (HSE) Is there an assessment? Yes FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps. You will ONLY be given content on any knowledge gaps identified in the pre-assessment. Your knowledge and understanding is then re-assessed. If you successfully complete all of the FAST TRACK pre-assessment questions correctly, then your knowledge is deemed complete and no course content or further assessment will be required.
Maritime Piracy: Security Procedures Course code: OLT-009 Course type: E-learning course Duration: 75 minutes Language: English The objectives of this course are: to contribute to the improvement of maritime safety through greater awareness; recognition of security threats; understanding the need for and methods of maintaining security awareness; and vigilance and knowledge of the procedures to be implemented in the event of emergencies relating to maritime piracy.
Bomb Threat and Search Course code: THC-001 Course type: E-learning course Duration: 49 minutes Language: English How do you deal with a report or threat of a bomb or other weapon? How do you handle alerts and searches? This course has four main lessons: crime and weapons, explosive devices, bomb threats, bomb search and blast mitigation. Each of the lessons aims to give essential information to provide the crucial elements for understanding the problem, the awareness of the risk and the need to never take anything for granted.
MJI - Torque and Tension Bolted Connections (ECITB MJI-01, 10, 11, 18, 19, 20) Course code: ME-15 Course type: E-learning course Duration: 110 minutes Language: English Who is the course for? This eLearning course is aimed at workers requiring refresher training before taking the ECITB technical tests for ECITB standards MJI10: Hand Torque Bolted Connection Techniques, MJI18: Hydraulically Tensioned Bolted Connections, and MJI19: Hydraulically Torque Bolted Connection Techniques. Is previous experience required? It is expected that as a participant in this course, you will have received formal training in working with mechanical joints and that you hold suitable qualifications. Completion of this course does not certify you to the ECITB standards but it will prepare you for the technical tests. How will the course benefit me? This course is designed as a refresher and revision tool to prepare for the TMJI10, TMJI11, TMJI18, TMJI19 and TMJI20 technical tests. How will the course benefit my company? This course will help delegates consolidate their knowledge and have an increased chance of passing the TMJI10, TMJI11, TMJI18, TMJI19 and TMJI20 technical tests. What standards are referenced in the course? The Engineering Construction Industry Training Board (ECITB) Mechanical Joint Integrity (MJI) training standards: • TS MJI-01 • TS MJI-10 • TS MJI-11 • TS MJI-18 • TS MJI-19 • TS MJI-20 Is there an assessment? There are assessments within the course at the end of each section, with an 80% pass mark and two attempts.
Behavioural Competency Course code: BAC-002 Course type: E-learning course Duration: 24 minutes Language: English After completing this course, the crew members will be able to identify the elements of the behavioural skills and the indicators. They will be able to determine which behaviours are negative and positive. After determining the positive and negative indicators they will able to promote behavioural skills onboard the working places.
Avoiding Cyclones at Sea Course code: STM-005 Course type: E-learning course Duration: 26 minutes Language: English On completion of this course, you will know what is a cyclone is and the basic principles of cyclone avoidance at sea. We will also explain how a risk assessment is carried out in sea areas prone to cyclones and the techniques used to avoid cyclones.
Protection and Indemnity Awareness (Maritime) Course code: MGM-041 Course type: E-learning course Duration: 45 minutes Language: English Who is this course for? Maritime personnel who require an introduction to or awareness of maritime Protection and Indemnity insurance. Is previous experience required? You do not need prior knowledge or experience to complete this course. How will this course benefit me? This course aims to provide personnel with an awareness of the principles of maritime Protection and Indemnity Insurance. How will this course benefit my company? By ensuring you have an understanding of the maritime Protection and Indemnity Insurance. What standards are referred to in this course? The Marine Insurance Act. Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.
Introduction to ATEX Course code: MUK-066 Course type: E-learning course Duration: 20 minutes Language: English Who is this course for? Personnel requiring awareness and understanding of the legislation for safe use of equipment in explosive atmospheres. Is previous experience required? No previous experience is required to complete this course. How will this course benefit me? This course aims to provide information on the European Directives that set the standard for equipment that is to be used in explosive atmospheres (ATEX). How will this course benefit my company? By ensuring you have information on the European Directives that set the standard for equipment that is to be used in explosive atmospheres (ATEX). What standards are referred to in this course? Dangerous Substances and Explosive Atmospheres Regulations of 2002 (DSEAR) Directive 99/92/EC, (also known as 'ATEX 137' or the 'ATEX Workplace Directive') Directive 94/9/EC, (also known as 'ATEX 95' or the ‘ATEX Equipment Directive') Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations of 1996 Is there an assessment? Yes
Control of Substances Hazardous to Health (CoSHH): FAST TRACK Course code: MUK-004-FT Course type: E-learning course Duration: Not set Language: English Course goal: This course provides learners with an awareness of the COSHH regulations, and how they control work with hazardous substances. FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area. FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps. This FAST TRACK course assesses the following Learning Objectives: LO1 Explain the CoSHH regulations and their applicability to the Oil and Gas Industry LO2 Explain the legal obligations under CoSHH for both employees and employers, and explain the REACH regulations LO3 Explain the health effects of working with hazardous substances, and the various ways that these can enter the body LO4 Explain the use of Material Safety Data Sheets, Labels and Assessments within the CoSHH regulations LO5 Explain the common labelling system and identify the standard symbols LO6 Explain the appropriate use of Personal Protective Equipment LO7 Explain requirements for storage, handling and disposal of hazardous substances LO8 Define the control measures for handling hazardous substances and explain the control hierarchy LO9 Explain the process for dealing with hazardous substances in the event of a spill LO10 Define the recording and reporting process within the CoSHH Regulations

Hits per page

< Previous | 1 ... 56 57 58 59 60 61 62 63 64 ... | Next >