Course catalogue

THIS COURSE IS NOT STCW APPROVED & CANDIDATES WILL NOT RECEIVE AN STCW CERTIFICATE UPON COMPLETION.

Who is this course for?

Any person conducting an in-service assessment of the competence of an on-oboard candidate.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

The aim of this course is to enable you as an on-board assessor to supervise the training and monitor the competence of seafarers. A seafarer's competence must meet the standards of the STCW Code.

This course is approved by the Norwegian Maritime Authority (NMA) on behalf of IMO.

How will this course benefit my company?

By ensuring you are qualified and certified as an Onboard Assessor. 

What standards are referred to in this course?

STCW Onboard Assessor (A-I/6)

This course is approved by the Norwegian maritime Authority (NMA)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.

This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.

Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.

Who is the course for?

All seafarers designated to operate maintain and service incinerators on board. 

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

During this course, you will gain an understanding of the regulations governing the discharge of sludge and garbage by use of incineration. You will also explore the management of sludge and waste oil on board vessels and how to ensure proper operation of the incinerators through maintenance, record keeping and compliance with IMO incinerator specifications. 

How will the course benefit my company?

The purpose of a shipboard incinerator is to provide a facility designed to incinerate wastes or other matter on board generated during the normal operation of the ship. Incinerators are predominantly designed for intermittent operation and comply with the latest IMO regulations. 

What standards are referenced in the course?

• Based on parts of Annex VI of MARPOL 73/78.

Is there an assessment? 

Yes

Who is this course for?

Maritime personnel who require an introduction to or awareness of vessel structures and potential risk factors.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide crewmembers with an understanding of the structural risk factors and forces acting internally and externally on a vessel.

How will this course benefit my company?

By ensuring you have an understanding of the structural risk factors on a vessel. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with a broad overview of common Electrical Safety Rules, and outlines best practice when working with electricity.

How will this course benefit my company?

By ensuring you have the knowledge of common Electrical Safety Rules, and the best practice when working with electricity, to reduce risk and injury at work.

What standards are referred to in this course?

• Health and Safety at Work Act

• Electricity at Work Regulations

• Management of Health and Safety at Work Regulations

• Electricity at Work Safe Working Practices

• Offshore Electricity and Noise Regulations

• Provision and Use of Work Equipment Regulations

• BS 7671: 2018 Requirements for Electrical Installations

• Offshore Installations (Safety Case) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel serving on vessels operating in polar waters.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Learners will gain a deeper understanding of the unique challenges and risks associated with operating in polar regions. This includes understanding the extreme weather conditions, ice hazards, and environmental considerations.

How will this course benefit my company?

By ensuring that employees are well-trained in handling the unique challenges of polar environments, companies can minimize the risk of accidents, injuries, or fatalities. This not only protects the workforce but also safeguards the company's reputation and assets.

What standards are referred to in this course?

• Based on parts of The Polar Code

Is there an assessment?

Yes

Who is this course for?

All engineering crew.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

By providing an insight into the auxiliary systems for diesel engines.

How will this course benefit my company?

By ensuring safe operations by providing knowledge of auxiliary systems for diesel engines.

What standards are referred to in this course?

This course does not reference any specific legislation or regulations.

Is there an assessment?

Yes

Who is this course for?

This eLearning course is aimed at individuals who are required to work with wells in the oil and gas industry.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide learners with an overview of well integrity and its importance in maintaining safe and secure operations.

This course contains the following sections:

Section 1: Well Integrity Overview

Section 2: Well Categorisation and Well Barriers

Section 3: Well Design and the Cementing Process

Section 4: Human Factors in Well Integrity

How will this course benefit my company?

To ensure you have an overview of well integrity and its importance in maintaining safe and secure operations.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Trainee Oil and Gas Operations Technicians / Deck Crew

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an introduction to the use of storage tanks

How will this course benefit my company?
By ensuring you are introducted to the use of storage tanks

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.