Course catalogue

The purpose of the training is to provide operators of telescopic forklifts a theoretical basic training in the use of telescopic forklift so that accidents can be avoided.The training will give the candidate a good introduction into the structure, risk factors and use of telescopic forklifts. The training is given as a supplement to forklifts, heavy machinery and lorry cranes.

Introduction

Area for use C1 lifting capasity 10 ton

Accidents with telescopic forklift

Construction and working principle

Support leg and stability

Boom construction

Overload system

Load chart

Rigging up

Theoretical exam

Evaluation

The purpose of this course is to provide theoretical basis knowledge to people who want to become inspector for various types of lifting devices. The course is a module that must be completed prior to the start of special education for each crane type.The course concludes with a theoretical test.

Introduction

Rules & regulations

Standards

Mechanics of materials 

Responsibilities/insurrance

Wire

Lifting gear

Worktask

Exam

The objective of the training is that the person be trained, are fully updated on all new elements that relate to fall rescue while reviewing previously rehearsed methodsIt is especially important that participants receive in-depth knowledge about events and their causes.

Introduction 

Regulations 

A review of accidents and incidents 

Rescue Service 

Equipment 

Routines working in height

Riskassessment

Management, scene of an accident / incident 

Stress and stress command

Suspension trauma, HLR

Rescue Exercises 

Evaluation

When completing the course the candidate will conduct a theoretical test to show that he / she has sufficient knowledge of the structure and construction, component learning, certification rules, inspection procedures, checklists, regulations, standards and manuals required as a basis for the control group G04 overhead cranes.

Introduction

Regulations/standards

Constructions

Components learning

Wire

Electrical cabinet

Certification rules

Inspection procedures

Checklist

Instructions

work task

Exam

The purpose of the training is to provide prospective riggers with a good theoretical basic training in the safe us of; fall protection equipment and simple lifting devices (simple overhead crane, column jib cranes, hand operated hoist, air and electrical hoists and transportable winches as well as giving future riggers a good practical practicality basic training in the safe use of rigging equipment.

Introduction

Fall protection equipment

Simple lifting devices

Hand operated air and eletrical driven hoist

Winches (Transportable)

Regulations (Norsok R-003-standards)

Primary structure, secondary structure

Susension points - beams

Equipment for rigging (pins, hoists, lifting tools)

Personal protective equipment

Planning of rigging operations (SJA)

Barriers

Dette er et kurs for alle som inngår i bro-team på hurtigbåt.

Kurset gjennomføres med e-læring, gruppearbeid og praktiske øvelser i simulator.

Kurset er tilpassert ankomst med fly samme dag til kursstart og avreise med fly siste kursdag.

Krav til forkunnskap: Gyldig grunnkurs/re-trening for hurtigbåt i tillegg til at det må gjennomføres og bestås en e-læringsmodul før kursstart.

Det vil være en test på e-læringen som må bestås ved kursstart for å få gjennomføre hele kurset.

Læremål: Etter kurset skal deltakerene kunne gjennomføre sikkert vakthold og god ledelse på hurtigbåt.

Kurset er i henhold til: Godkjent emneplan for hurtigbåt grunnkurs og oppdatering inkludert BRM og ERM. FOR-2011-12-22-1523, § 65 Dekker også BRM og ERM kurs iht. STCW 1978 konvensjonen med senere endringer.

Endring av kursdato: Må avtales senest 7 dager før kursstart i kontortid 0830-1500.

Avmelding: Må skje skriftlig til vår e-post adresse post@ssras.no

Du kan avbestille inntil 14 dager før kursstart.

Ved avbestilling under 14 dager før kursstart kreves 50% kursavgift.

Ved ikke oppmøte kreves full kursavgift.

Ved avmelding pga. sykdom må legeerklæring fremvises.

Avlysning: Vi forbeholder oss retten til å avlyse kurs ved for få påmeldte.

Objective: The main goal is to provide personnel who are to perform the roles of signal transmitter, signalers and deck operator with sufficient knowledge of handling and transport of dangerous goods and hazardous waste, to be able to identify hazards and risks when handling this type of cargo, in such a way that unwanted incidents are avoided.

Safe handling and transport of dangerous goods and hazardous waste requires knowledge of hazards and risks, regulations, correct execution and safe practice during treatment and transport.

Content:

The learning process leading up to a certificate of competence is carried out to contribute to safe lifting operations, as well as to document the necessary knowledge and skills in accordance with requirements laid down in national regulations and standards.

After completion, participants must be able to identify hazards, risks, causes and consequences of accidents with dangerous goods and hazardous waste.

Participants will also be familiar with restrictions, requirements, classifications, identification, packaging, marking, documentation and handling of dangerous goods and waste.

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in enclosed spaces.

The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation

Content:

- Review of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Plan entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in our training tank. We practice entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter

Lovpålagt opplæring

Nettundervisning - Zoom 

Våre kurs inkluderer:

Læremateriell

Kursbevis

Link: https://www.arbeidstilsynet.no/tema/kjemikalier/isocyanater/krav-til-opplaring-for-alle-som-bruker-diisocyanater/

Fra 24. august 2023 må alle som bruker diisocyanater og diisocyanat-holdige blandinger ha fullført opplæring i sikker bruk.

Opplæringen må kunne dokumenteres.

Eksempler er:

Byggeskum

Lim

Maling

Lakk

Tetningsmasser