Course catalogue

The objective of the training is to maintain knowledge of packing, securing and transporting loads as well as user control of load carriers. This covers the entire logistics chain from supplier to customer and vice versa to ensure that incidents do not happen.

Introduction

Causes of near misses, deviation reports

Risk assessment

Regulations, standards and NOG's guidance

Different load carriers, planning, user control, packing

Use, control of load securing equipment,

Practical training:

- Use of personal protective equipment

- Implementation of user control

- Plan and implement loading and securing loads

- Safety during operation

- The use of barriers

- Theoretical and practical exam

The course shall provide knowledge and skills in accordance with the requirements regarding safe use and servicing of fall protection equipment. Practical knowledge of fall protection and proper use of rescue equipment, use of rope access,  rescue of free hanging person, over open sea, tank, use of stretcher, abseils and treatment using first aid equipment.

Introduction

Repetition of basic fall protection and rescue

Regulations

Equipment knowledge

Use of personal protective equipment

Risk assessment

Theoretical review of rescue exercises

- Planning and risk assessment of rescue

- Basic first aid

- Rescue efforts w / respiratory systems

- Rescue of free hanging person

- Rescue from vessels / confined spaces

- Rescue over the open sea

- Lowering / Hoisting of person

- Stabilization of person

- Knowledge of suspension trauma

Practical exam

Theoretical exam

When finish with the course the candidate should be able to perform a periodic inspection within G08 (G20).

Practical training in operation of Lorry crane

Practical training in inspection

Inspection procedures

Reports

Tools and equipment

Examens

The main objective with the training is to provide training for the candidate to acquire basic theoretical knowledge about safe use of mobile crane so that accidents are avoided by use.

Introduction with demand for craneoperator

Area for use

Accidents

Mechanics, wind forces

Construction/structure

Crane beam, base plate, support leg

Electronics, 

Safety switches

Ropes/Block

Load chart

Certification/Documentation

Inspection and maintenance

Arrangement

Theoretical exam

The objective for this course is to provide updated training and acquire basic knowledge and practical skills on the control of scaffolding so that accidents are avoided. Furthermore, the course gives the candidate a knowledge that is in accordance with the regulations.

Introduction

Safety at work

Planning of work in height

Fitting instruction

Regulations

General provisions and responsibilities

Technical requirements

Scaffolding structures

Forces that influence scaffoldings

Structures under construction

Risk assessment

Practical control of scaffolding

Inspection report

Working on completed construction

The candidates will after the learning measures be able to perform periodic inspections of the loadcarriers for internal transport and extraordinary control of offshore containers to be sent onshore.

Intruduction

Regulation, standards, guidelines

Loadcarrier

Construction

Lifting set including shackles

Spreader, spreaderbeams, liftingframes

Periodic inspection of various loadcarriers

Evaluation

The main objective with the training is to provide training for the candidate to acquire basic theoretical knowledge about safe use of Earth moving machines so that accidents are avoided by use.

Introduction

Regulation

Area for use

Accidents

Construction various types

Maintenance

Hydraulic,

Diesel pwered engine

Certification/Documentation

Practical 8 hrs

Theoretical exam

After completing the course the candidate will conduct a theoretical and a practical test to show that he / she has sufficient knowledge of the laws, regulations, standards, development, certification, labeling, control and rejection rules for different types of manual hoists, as well as control procedures and completion of certificates and inspection reports.

Introduction

Regulation

Handoperated hoist, lever hoist, chain hoist etc.

Construction, cert., marking, inspection, regulation when to reject,

Inspection procedures

Wire, chain,

completion of certificate, use of manuals,

Practical training within inspection, checklist, procedures etc.

Theoretical and practical exam

The objective of the training is to acquire the candidate’s basic theoretical and practical understanding of safe operations with offshore cranes, so that accidents are avoided by use.

Laws, regulations, standards

Norsok R-003

Risk assessment of work operations

Communication

Material handling plan

Barrier

Evacuation routines

Inspection of lifting equipment

Documentation

Tandem lift

Roles & responsibilities

Selection of lifting equipment

Exam

The course is intended to give new crane operators practical basic training in use of knuckle boom cranes.

Knowledge and procedures

Daily inspection

Early planning

Use of load chart

Lifting operations

Parking

Reexamination 

Maintenance