Course catalogue

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

Competence for "Working at heights" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Kurset starter med fellesteori som er en grunnleggende innføring i aktuelle lover og forskrifter og en grunnleggende innføring i sikker bruk av arbeidsutstyr. Fagdelen vil gi eleven en god teoretisk grunnopplæring i sikker bruk av masseforflyttingsmaskiner samt en god innsikt i oppbygging, virkemåte, vedlikehold og bruk.

Eleven skal gjennomføre teorimodul 1.1 (8 timer), modul 2.1 (24 timer) og  3.1 (8 timer). Dette skal gi førerne en god generell grunnopplæring i sikker bruk og praktisk forståelse for prinsippene for masseforflytningsmaskiner.

Kurset gjennomføres over 5 dager, og avsluttes med en teoretisk prøve.

Etter bestått teoretisk prøve og gjennomført grunnleggende praktisk bruk modul 3.1 + praksiskjøring 32 timer, kan praktisk prøve gjennomføres. Bestått praktisk prøve vil være grunnlag for utstedelse av kompetansebevis for fører av masseforflyttingsmaskin i valgt klasse.

Kursinnhold

- Konstruksjon

- Oppbygging

- Betjening

- Bruksegenskaper

- Bruksområder

- Sikkerhetsutstyr

- Viktige kontrollpunkter

- Vedlikehold


This course in only available in Norwegian.

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av traverskraner, slik at ulykker ved bruk unngås.

Regelverksreferanse:

Modul 2.7 - 3.7 - 4.7

Oppdatere, vedlikeholde kunnskaper, ferdigheter og holdninger innen sin beredskapsfunksjon i eller relatert til søk og redningslag og HLO. Erfaringsoverføring helivakt og HLO.

Innhold:

Kurset er i hovedsak tillagt praktiske øvelser hvor brief og debrief er tillagt stor vekt.   

Taktisk lagarbeid. 

Røykdykking. 

Slokketeknikker. 

Værrapportering, kommunikajson og rutiner 

- Farlig gods 

- Flydrivstoff 

- Beredskapssituasjoner og normale operasjoner på helikopterdekk 

- Verneutstyr

Do you want to obtain certification in NEK 405-2?

Then we can offer a 1 day course that is preparatory to the certification.

The certification is performed by Nemko or DNV. Fill out the registration forms and submit them before the course starts

Goals for NEK 405-2 (Electricity control residential)

After completing the course, the participants shall be able to carry out a check of existing installations in a dwelling in accordance with the requirements and recommendations in NEK405-2 Fire prevention electricity control residential. The course is preparatory to taking the exam / certification in NEK405-2.

• Requirements relating to personnel, examination certificates and organisation of certification schemes
• Requirements relating to performance and requirements for control enterprises
• Set the control reference level (FEB-88, FEB-91, FEL, and NEK400:1998 to NEK400:2022
• How to reset the installation
• Review of all checkpoints in NEK405-2
• Review of all information points in NEK405-2

Dette kurset er for deg som kvalifiserer til elektroinstallatørprøven / installatørprøven, og som ønsker en kompetanseheving i forkant av eksamen. I kurset gjennomgår vi også informasjon knyttet til det praktiske rundt gjennomføringen av prøven.

Må medbringes på kurs: Normguide + NEK 400:2022. På forhånd må du gjøre deg kjent med de sentrale forskriftene; FSE, FEK og IK

Innhold:

Følgende temaer gjennomgås i forberedende kurs til elektroinstallatørprøven / installatørprøven:

• Relevant regelverk
• Rollen som faglig ansvarlig
• Manuell prosjektering
• Risikovurdering
• El-sikkerhet
• Tidligere eksamensoppgaver
• Informasjon om kvalifiserende prøve og avsluttende prøve (eksamen)
• Krav til gjennomføring

Oppfølging og oppgavehjelp etter endt kurs

The course is designed for personnel who will have an introduction to potentially explosive areas, markings, equipment and requirements. The participants will receive an introduction according to relevant parts of NEK 420, IEC 60079 standard (NEK EN 60079 standards) as well as national adaptations.  The course is according to NFEA EX-KOMP:2021.

The participants' learning objectives are to have an understanding of:

• The general principles of explosion protection

• Site eligibility

• Gas groups and the relationship between area and equipment

• Temperature classes and the relationship between area and equipment

• The general principles of type protection and marking

LEARNING OBJECTIVES

By the end of the course the students should have achieved:

• Thorough knowledge  of the practical aspects of DP Operations
• Capability  to plan and conduct any DP Operation, including risk assessment, contingency planning and assessment of vessel capability
• Ability to undertake any operation with due regard to all circumstances of seamanship and operational requirements
• Ability to react correctly to any circumstances which constitute  or could lead to a catastrophic failure

CONTENT

• Study of DP incidents
• Construction  and use of work site diagrams, charts and vessel templates for use in DP operations
• Preparation  of plans for a projected DP operation, contingency plans for expected deviations and emergencies
• Participation  in simulated situations in a variety of DP operations while handling routine and emergency situations
• Risk  and safety analysis, and defining DP equipment classes
• The  DP system’s utilisation of position measurements,and tests on position reference systems.  

LEARNING PROCESS

The training will be a combination of theoretical lessons and practical exercises. The  participants will work with practical scenarios based on real operations, training on planning and executing specified operations under varying simulated conditions, including emergency handling on DNVGL Class A or B approved simulators.

SPECIAL INFORMATION

References:
• IMCA M 117
• IMO MSC Circ.738
• DNV GL RP 0007
• DNV GL ST 0023

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics. 

Maintaining health and well-being while working from home encompasses many areas, including ergonomics, preventing feelings of isolation and effectively managing stress. Studies have found that more than half of people working from home had not paid any attention to ergonomics, and 94% of them reported that neither had their employers. Almost half of remote workers have experienced work-related pains. One of the most problematic aspects of home working is the isolation and the lack of access to day-to-day informal interactions. While remote working enables greater autonomy, it also leads to higher levels of work intensity. The ‘24/7’ availability for work can result in family conflict and stress. Key areas to promote a positive work-family interface include the parental ability to cope with children and amicable resolutions of conflict about working hours, household work and personal time in the family.

The ‘Healthy Home Working’ bundle includes 3 month access to 12 online courses and over 9 hours of eLearning.

• Stress Awareness

• Working Time Limits and Fatigue Management

• Display Screen Equipment (DSE)

• Ergonomics

• Health and Safety for Home Workers (Employees)

• Medicine Awareness

• Smart Health: Sleeping – How to Ensure You Are Well-Rested & Energized

• Smart Mental Health: Managing Anger and Emotions

• Smart Mental Health: Keys to Successful Parenting

• Smart Health: Drinking Responsibly

• Smart Mental Health: Reducing Stress and Anxiety

• Smart Mental Health: Mastering Marriage

EXAM OBJECTIVES

This exam tests the skills and competence of a DPO against the requirements given in the competence standard DNV-GL Notation AJ/DPA-WV.

The examination is a thorough test to cover the most important competences for DPO’s irrespective of type of vessel, trade or activity. The test measures how well operation of equipment, duties and tasks are performed, all in compliance with relevant international, national and local regulations and requirements.

EXAM AND CERTIFICATION PROCESS

The test center will upon receipt of the application formsend a notification containing the following:

• Exam date and time
• Exam place
• Terms & conditions
• Recertification requirements
• DNV GL standard for certification ST-0023
• Standard for certification 0032, Appendix A: Examination regulations
• Time schedule for examination

SPECIAL INFORMATION

• DNV GL Standard for certification ST-0032 - Test centre for certification of personnel
• DNV GL standard for certification ST-0033 - Maritime simulator systems
• DNV GL standard for certification ST-0023 - Competence of Dynamic Positioning Operators