Course catalogue

Conflict always creates uneasiness in the minds of employees and organizations. Conflict can involve sore emotions and impend relationships. Leaders experience the same emotional distress while handling a conflict situation. The most difficult situation a leader deals with is conflict management. It is observed that ill-managed conflict creates huge costs in the form of time expenditure, higher attrition, legal implications, etc. It also lowers productivity. When people are involved in conflict, they begin to recoil, stop sharing information, and take fewer risks. The result can be poor decision making. Low morale and strained working relationships can cause stress and drain employees’ energy to focus on being creative and productive. In this lesson, you will learn to deal with situational conflict.

• Identify the five stages of organizational conflict  

• Name the five styles of conflict management   

• Interpret when to use the different styles of conflict management

The course is designed for mechanical personnel and others engaged in ignition-source assessment, inspection and maintenance of mechanical equipment in hazardous areas.

Our goal is to motivate the employee to work safely and securely by providing relevant expertise.

The course will give a basic introduction to the concept of mechanical Ex protection and will therefore help the individual to find potential sources of ignition.

The course is based on IEC 80079-36 and 37, EN-1127-1 according to ATEX.

The content follow the syllabus issued from IWCF.

• General well control principles
• Risk assessment
• Hydrostatic pressure
• Formation pressures
• Primary & secondary well control
• Well control equipment
• Subsea and surface equipment
• Well barrier concept
• Kick causes
• Kick detection
• Influx characteristics and behavior
• Well control methods
• Inflow testing

Qualifying scaffolders for assembly, dismantling, modification and inspection of scaffolding with upper decks over two meters in standard alignment.

Introduction

Regulation

Planning of scaffolding

Scaffold construction

Allowable loads

anchor/wind forces

Inspection of scaffold

Report of inspection

Tag/marking

Use of harness equipment

Assemble/dismantling of scaffolding

Evaluation

Course Description:-

This Bundle consist of 23 modules; this gives an insight as to what questions to expect at a third-party inspection, and it also ensures that the candidate is familiar with the ship-specific details and the company requirements.

The modules are not exhaustive, but they will empower the candidate on dealing with third-party inspectors professionally.

The candidate will get a preview of real situations on board, and how they could deal with the situation, in case the candidate is unsure, there are options to choose from; this module has a score and a little anger meter on the top right of the screen so the candidate will be able to judge the expressions of the inspector and also get a score to know how he/she performed.

It also serves as a refresher training before any inspection and, in turn, will boost the candidate's confidence. 

It will help combine your knowledge, core competency, your soft skills, your situational awareness and your attitude and empower you to be an efficient member of the vessel’s team.

It will assure the candidate on how to deal with third-party Inspectors professionally and how to handle the situation maturely. It also serves as a refresher training before any inspection and, in turn, will boost the candidate's confidence.  

Learning Objectives:-

At the end of this module, the candidate will be able to

Confidently answer any third-party inspector and will be able to demonstrate or answer any question asked regarding LSA, FFA, safety procedures, environmental procedures, watchkeeping, equipment related, documentation or certification.  

Understand the responsibility and importance of having the right attitude when dealing with third-party inspectors.

Understand the consequences of a poor attitude whilst answering third-party inspectors.

Have self-confidence and self-assurance whilst dealing with third-party inspectors. 

Understand the importance of good housekeeping, accurate record keeping and complying with the Company SMS, International statutory and Flag state requirements

Course Description:-

This bundle consists of 9 modules, which include inspection of the accommodation spaces, hospital, galley and Cargo control room.

This bundle focuses on the Accommodations and the Cargo control room.

You will be guided on how to carry out various checks around the accommodation spaces, hospital, store rooms, laundry, galley, freezer rooms, Cargo control room etc. This module will also show you the most frequent checks and tests carried out by various inspectors and auditors.

It will help combine your knowledge, core competency, your soft skills, your situational awareness and your attitude and empower you to be an efficient member of the vessel’s team.

It will assure the candidate on how to deal with third-party Inspectors professionally and how to handle the situation maturely. It also serves as a refresher training before any inspection and, in turn, will boost the candidate's confidence.

Learning Objectives:-

At the end of this module, the candidate will be able to

1) Carry out systematic checks and tests whilst inspecting the hospital, galley, Cargo Control room and other accommodation spaces; this will ensure that these spaces are compliant and ready for inspection.

2) Understand the responsibility and importance of having the right attitude when dealing with third-party inspectors, 

3) Understand the importance of good housekeeping, accurate record keeping and complying with the Company SMS, International statutory and Flag state requirements.

Course Description:-

This bundle consists of 16 modules, which include all the Lifesaving and fire-fighting appliances on board.

This bundle focuses on the Life-saving and firefighting appliances on board.

1) You will be guided on how to carry out various checks and tests for the emergency fire pump, various fixed firefighting systems, lifeboats, life rafts, life buoys, Emergency headquarters etc. This module will also show you the most frequent checks and tests carried out by various inspectors and auditors.

2) It will help combine your knowledge, core competency, your soft skills, your situational awareness and your attitude and empower you to be an efficient member of the vessel’s team.

3) It will assure the candidate on how to deal with third-party Inspectors professionally and how to handle the situation maturely. It also serves as a refresher training before any inspection and, in turn, will boost the candidate's confidence.  

Learning Objectives:-

At the end of this module, the candidate will be able to

1) Carry out systematic checks and tests of emergency fire pump, various fixed firefighting systems, lifeboats, life rafts, life buoys, emergency headquarters etc; and ensure that these spaces are compliant and ready for inspection.

2) Demonstrate the various checks carried out on the SCBA compressor and will able to ensure the SCBA compressor is compliant in all respects, ready for an inspection and ready for immediate use.

3) Demonstrate the various checks required to be carried out for various extinguishers, fire hoses, fire hose boxes and couplings and able to ensure that these equipment are compliant in all respects, ready for inspection and ready for immediate use.

4) Understand the responsibility and importance of having the right attitude when dealing with third-party inspectors, 

5) Understand the importance of good housekeeping, accurate record keeping and complying with the Company SMS, International statutory and Flag state requirements.

Course Description:-

This bundle consists of 6 modules, which include inspection of the accommodation spaces, hospital, and galley.

1. You will be guided on how to carry out various checks around the accommodation spaces, hospital, store rooms, laundry, galley, freezer rooms etc. This module will also show you the most frequent checks and tests carried out by various inspectors and auditors. 

2. It will help combine your knowledge, core competency, your soft skills, your situational awareness and your attitude and empower you to be an efficient member of the vessel’s team. 

3. It will assure the candidate on how to deal with third-party Inspectors professionally and how to handle the situation maturely. It also serves as a refresher training before any inspection and, in turn, will boost the candidate's confidence. 

Learning Objectives:-

1. Carry out systematic checks and tests whilst inspecting the hospital, galley and other accommodation spaces, ensuring that these spaces are compliant and ready for inspection.

2. understand the responsibility and importance of having the right attitude when dealing with third-party inspectors,

3. understand the importance of good housekeeping, accurate record keeping and complying with the Company SMS, International statutory and Flag state requirements

The training shall provide competence in:

Organization of emergency preparedness

Laws and regulations

Weather reporting, communication and routines

Helicopter decks - regulations and guidelines

Dangerous goods

Aviation fuel

Emergency situations and normal operations on helicopter decks

Helicopter types

Fire theory

Extinguishing media theory

Fire practice

Protective equipment

After completing the training, the participant must be able to;

Describe the organization of emergency preparedness on offshore installations, as well as the purpose of such an organization

Use the helideck manual

Carry out communication and weather reporting by helicopter

Reproduce helicopter deck regulations and guidelines

Handle dangerous goods

Describe and perform inspections of the fuel system

Perform HLO's tasks in emergency situations and normal operations on helicopter decks

Explain helicopter types

Use their knowledge of fire and extinguishing agents to put out a fire

Use the appropriate extinguishing agent to extinguish a fire

Use protective equipment and smokediver equipment

Duration:

Duration of the course is 4 days, including the protective equipment module. The first day consists of e-learning that you complete whenever you want, outside the course center and before you meet at the course center for practical exercises.

Submission:

The e-learning must be completed in full before you attend practical training.

This course, created by ILM has been designed to help you understand and identify your own personal and professional development needs, as well as show you how to create and maintain your own development plan.