$industryCaptionMap.get($model.industryId)

Course catalogue

Category

Course type

Course provider

hits

2754

Introduction to Scrubbers (with simulator) Course code: MGM-056-SIM Course type: E-learning course Duration: 225 minutes Language: English Who is the course for? Officers and Crew. Is previous experience required? No, but basic maritime engineering knowledge is recommended. How will the course benefit me? This course is designed to provide you an understanding of the operation and use of an exhaust gas cleaning system (Scrubbers). How will the course benefit my company? The course will provide the learners with basic knowledge about scrubbers and scrubber operations. What standards are referenced in the course? • MARPOL Annex VI • OCIMF guide for Implementation of Sulphur Oxide Exhaust Gas Cleaning Systems Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%. Description of simulator exercise Following the Introduction to Scrubbers e-learning, you will in this exercise about Exhaust Gas Cleaning System (EGCS) expected to monitor the EGCS systems on a vessel running full ahead with the main engine operational. You will be required to respond to alarms and requests from the Chief Engineer or Captain, utilizing the Engine room simulator from Kongsberg Digital.
Lifeboat Coxswain Free-Fall Lifeboat - Refresher Course Course code: NOG-OSE129-REP Course type: Classroom course Duration: 1 day Language: Norwegian The object of this course is to help course participants maintain and develop their knowledge, skills and attitudes regarding their role in an emergency response situation. This course consists of a representative selection of the material from the Lifeboat Coxswain Conventional Lifeboat – Basic Course, adapted to participants’ previous knowledge, with major emphasis on practical training and drills. This course is valid for 2 years.
Pumproom Inspection (Oil Tankers) Course code: NAVG-016 Course type: E-learning course Duration: 13 minutes Language: English Course Description:- This course deals with the Pumproom. Here you are guided through various checks to be carried out in the pump room, starting from the entrance and working our way down to the bottom platform, carrying out the various checks done by various inspectors and auditors. Learning Objectives:- At the end of this course, the candidate will be able to demonstrate the various checks carried out in a pump room inspection.
Personal Survival Techniques for Yachts Course code: SBLY-1032 Course type: E-learning course Duration: 85 minutes Language: English Who is the course for? All seafarers working onboard superyachts. Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? By giving you a basic understanding of the theoretical principles behind surviving at sea. How will the course benefit my company? When an emergency happens, it happens fast. This course will provide a basic understanding of the techniques for personal survival at sea. What standards are referenced in the course? • Based on parts of IMO Model course 1.19 and the provisions of table A-VI/1-1 of the STCW Code
Valve Technology (4 days) Course code: NOG-143-1 Course type: Classroom course Duration: 4 days Language: Norwegian The course is in accordance with the Norwegian oil and gas training curricula - courses in valve technology. The course is a combination of theory and practical application and concludes with a web-based exam, which takes about 2 hours to complete. This training will help participants make their daily work with valves simpler and safer. Course Content - Operate different valve types optimally - See the difference between the different types of valves - See if valves are functioning properly - Test valves - Perform 1st line maintenance - Ensure that valves are and remain atmospherically sealed - Dismantle and install valves on the line
Introductory course for the SRC/VHF-exam Course code: MTP-054 Course type: E-learning course Duration: 60 minutes Language: Norwegian Who is this course for: Anyone wanting to take the SRC/VHR-exam. Is previous experience required? You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role How will this course benefit me? To use VHF you must have a VHF / SRC certificate. With this course you will learn the whole curriculum in a simple and easily understandable way. How will this course benefit my company? By ensuring you have the competence to use VHF. What standards are referred to in this course? Lovdata - www.lovdata.no Petroleum Safety Authority - www.psa.no Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.
Negotiation Skills Course code: WHT-017 Course type: E-learning course Duration: 96 minutes Language: English The following objectives will be covered: - What is a Negotiation? - What are Negotiation Skills? - Why are Negotiation Skills Important? - The Four Phases of Negotiation. - Different Negotiation Styles. - Tips to Improve Negotiation Skills. - Mistakes to Avoid in Negotiations.
Man Overboard for Yachts Course code: SBLY-942 Course type: E-learning course Duration: 33 minutes Language: English Who is the course for? This course is intended for all seafarers regardless of rank. Especially useful for Masters and Officers onboard Superyachts. Is previous experience required? No previous experince is required to complete this course. How will the course benefit me? By providing you with an understanding of situations that can result in a 'man overboard’ and the actions to be taken should an incident occur. How will the course benefit my company? A man overboard requires immediate and precise intervention. To ensure that action is taken without delay, every crew member is trained in man overboard procedures and drilled on their specific duties. The correct and timely application of these procedures will increase the probability of a successful recovery. What standards are referenced in the course? • The Inernational Convention for Safety of Life at Sea (SOLAS)
G11: Stropp og anhuker - (Modul 1.1 og 2.3) Course code: KOL-001 Course type: Classroom course Duration: 24 hours Language: Norwegian Hovedmål med kurset er å gi personer som skal utøve rollene som signalgiver, anhuker, dekksoperatør, boredekksarbeider, rigger og operatør av løfteinnretning opplæring i vurdering og forståelse av farer samt sikker bruk, vedlikehold, daglig kontroll og kasseringsregler for ulike typer løfteredskap. Anhuker og signalgiver skal samhandle og kommunisere med operatør av løfteinnretning i enhver løfteoperasjon på en slik måte at uønskede hendelser unngås. Kursinnhold - Innledning - Lover, forskrifter og standarder - Personlig verneutstyr og farlig gods - Krav til signaldgiver og anhuker - Planlegge, gjennomføre og evaluere - Oppbevaring, bruk og kontroll av løfteredskaper - Sikkerhet for personell - Kritiske løfteoperasjoner - Løftetabeller - Praktisk bruk løfteredskaper - Evaluering og avsluttende prøve Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser Modul 2.3 (16 timer) G11- Løfteredskap This course is only available in Norwegian.
Piping Vibration Course code: MUK-255 Course type: E-learning course Duration: 40 minutes Language: English Who is the course for? All personnel who are involved in working with pipelines and may experience issues from pipeline vibrations. Is previous experience required? No previous experience is required to complete this course. How will the course benefit me? This course aims to provide an overview of industry best practice in relation to piping vibration as well as the risks involved. How will the course benefit my company? The course will benefit companies by ensuring that all personnel have an understanding of industry best practices in relation to piping vibration, which will subsequently reduce injury. What standards are referenced in the course? International Organization for Standardization (ISO) Is there an assessment? Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hits per page

< Previous | 1 ... 97 98 99 100 101 102 103 104 105 ... | Next >