Course catalogue

Obligatory working environment training for safety deputies and union officials, completed as e-learning combined with classroom training. 

The course provides basic working environment training in accordance with the main contract between The Norwegian Confederation of Trade Unions (LO) and The Confederation of Norwegian Enterprise (NHO).

Course Content

E-learning

Interactive exercise sequences, video clips, and animations are used to illustrate the topics.

The course provides insight into why HSE work is important, using The Working Environment Act as a tool.

Knowledge of roles and responsibilities in relation to the working environment.

Using systematic methods for improving the working environment and for solving working environment issues.

Classroom Training

This internal company gathering can be conducted and organised by the company itself, or in collaboration with Mintra/The Federation of Norwegian Industries. If you would like Mintra/The Federation of Norwegian Industries to conduct the training, a minimum of 10 people must be enrolled.

If your company would prefer to conduct the training, relating content to internal routines and conditions, Mintra will contribute with documentation and information that describe activities related to this training. 

Contact us to find a suitable implementation model!

Who is the course for?

Personnel responsible for cooking, preparing or handling food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will the course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Any person conducting an in-service assessment of the competence of an on-oboard candidate.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

The aim of this course is to enable you as an on-board assessor to supervise the training and monitor the competence of seafarers. A seafarer's competence must meet the standards of the STCW Code.

This course is approved by  the Norwegian Maritime Authority (NMA) on behalf of IMO.

This course will be a part of a blended learning in two stages:

- The first stage is this e-learning course

- The second stage will be the on-board workbook

The training will be complete when all the elements of the checklist pertaining to your on-board assessor

How will this course benefit my company?

By ensuring you are qualified and certified as an Onboard Assessor. 

What standards are referred to in this course?

STCW Onboard Assessor (A-I/6)

This course is approved by the Norwegian maritime Authority (NMA)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

IMPORTANT

To apply for an Onboard Assessor STCW course, The Candidate will need to have a Norwegian D-number.

The documentation including the checklist should be sent to STCW@mintra.com, and Mintra will notify the Norwegian Maritime Authority when the course has been successfully completed.

Thereafter, the candidate will have to apply directly to the NMA to receive the Onboard Assessor certificate with reference to the STCW code. 

Who is this course for?

Personnel responsible for cooking, preparing or handing food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will this course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All Maritime personnel.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

To provide knowledge of Portable Fire Extinguishers

How will the course benefit my company?

To aid in the reduction of fire incidents on vessels.

What standards are referenced in the course?

International Code for Fire Safety Systems (FSS Code)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel involved in lifting operations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of the Banksman and Slinger roles, and how to carry out lifting operations safely.

How will the course benefit my company?

This course will provide personnel with an overview of the Banksman and Slinger roles, to help ensure that lifting operations are carried out safely.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for:
Maritime personnel, onshore and offshore.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
The course looks at the purpose of the ISM Code, which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will this course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM Code.

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code 

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

The International Safety Management (ISM) Code 

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All Engineering Officers.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide knowledge of isolation techniques.

How will the course benefit my company?

Improve safe isolation of systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel who require an understanding of major accidents in the maritime industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to major accident hazards.

How will the course benefit my company?

This course will provide personnel with an introduction to major accident hazards and the role that they play in the mitigation of catastrophic events.

What standards are referenced in the course?

Safety and Environmentally Critical Elements (SECE)

ISM Code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

The Working Environment Act, section 3-5, obligates employers and executives to complete HSE training. This course satisfies the requirements for HSE training for executives and managers.

The course contains the following modules: 

• A working life changing

• The Working Environment Act

• Risk Managament

• Healthy enough to work?

• Systematic HSE work

Who is the course for?

Personnel who are involved in the preparation of dangerous goods for transportation by sea.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course aims to provide learners with industry best practice in relation to the transportation of dangerous goods by sea.

This course has been developed in accordance with the general awareness/familiarisation training requirements described in the IMDG Code (Chapter 1.3).

How will the course benefit my company?

By ensuring you are familiar with industry best practice in relation to the transportation of dangerous goods by sea.

What standards are referenced in the course?

• International Convention for the Safety of Life at Sea (SOLAS)

• International Maritime Dangerous Goods (IMDG) Code

• Title 49 of the Code of Federal Regulations (49 CFR)

• International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

• IMO Model Course 1.10 ‘Dangerous, Hazardous and Harmful Cargoes’

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 70%.

Who is the course for?

Deck and Engine Room Ratings and any other personnel with responsibility for carrying out surface preparation and coating applications.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing an overview of the importance of preparing surfaces and coatings prior to carrying out operations and how improper preparation and application can affect the success of the protective coating.

How will the course benefit my company?

By providing personnel with an overview of the importance of preparing surfaces and coatings prior to carrying out painting operations and how improper preparation and application can affect the success of the protective coating.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.

What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Any officer of the watch looking for an easy-to-follow supplement or refresher to the IMO generic course (IMO Model Course 1.27) and anyone requiring knowledge of the general features of ECDIS.

Is previous experience required?

No previous experience is required to complete this course. Basic nautical knowledge including an understanding of terrestrial and electronic navigation is recommended.

How will the course benefit me?

By providing you with the general features of an ECDIS, its strengths and limitations and hands-on knowledge about the most common features and functionalities all ECDIS have.

How will the course benefit my company?

By improving the officer’s general understanding of an ECDIS as a computer-based navigation system and its role as part of a navigational watch, thus improving the performance and safety of navigation.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Ratings and junior engineers new to marine engineering.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will enable you to understand the purpose of a boiler on board and its basic requirements. It will also provide you with some basic safety knowledge.

How will the course benefit my company?

By providing your engineers and ratings with basic knowledge on boiler operations on board.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel that may be exposed to environments containing nitrogen.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing knowledge in the risks of entering a nitrogen environment.

How will the course benefit my company?

By reducing Nitrogen exposure risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course. 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.

This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.

Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Ship's Master and Officers.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide an overall understanding of the requirements of the Maritime Labour Convention (MLC) and the responsibilities of the ship's Master and Officers in relation to achieving, managing and maintaining compliance.

How will this course benefit my company?
By ensuring you have an understanding of the Maritime Labour Convention (MLC) and the resposibilities thereto.

What standards are referred to in this course?
Maritime Labour Convention (MLC2006)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel who require a basic understanding of the operation of diesel engines and the importance of maintaining good lubrication for their safe operation.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of how diesel engines operate, their components and their use within the industry. It will also outline the importance of maintaining good lubrication for their safe operation.

How will the course benefit my company?

This course will provide personnel with an overview of how diesel engines operate and the importance of maintaining good lubrication for their safe operation.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Yes

Who is the course for?

Junior Engineers and Electro-tech Officers, Engineering and Electrical Ratings, Engineering and Electrical cadets.

Is previous experience required?

Basic maritime electrical engineering knowledge is recommended.

How will the course benefit me?

The course is designed to enable you to understand the basics around auxiliary generators and their uses.

How will the course benefit my company?

The course will provide the learners with basic knowledge about auxiliary generators and their uses.

What standards are referenced in the course?

IMO SOLAS 1974

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel involved in Marine maintenance activities.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide information on how to reduce corrosion in the Maritime Industry.

How will the course benefit my company?

By reducing equipment failures due to corrosion.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Chief, Deck and Engine Officers

New departmental staff, crew members (both offshore and onshore)

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give you an overview of cargo operations and procedures for cargo handling and precautions at tanker and terminal.

How will the course benefit my company?

Raising awareness of precautions at tanker and terminal and providing the crew with clear procedures for cargo handling can reduce the risk of unwanted tanker operation incidents.

What standards are referenced in the course?

STCW 78 AND 1995 revised

MCA 2006

IMO / ISGOTT / COSWP

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All maritime personnel involved in the management of change process.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of the management of change process.

How will the course benefit my company?

This course will provide personnel with an overview of the steps involved in the management of change process, the roles and responsibilities of personnel, the risks involved in change management and how these risks can be controlled.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel.

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

By providing you with an overview of Safety Data Sheets (SDS) and how to use them.

How will the course benefit my company?

By increasing personnel’s awareness of the safe use and storage of hazardous substances.

What standards are referenced in the course?

• The Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

• International Maritime Dangerous Goods (IMDG) Code and MARPOL Annex III

• The Registration, Evaluation, Authorisation and restriction of CHemicals (REACH) Regulation

• The Control of Substances Hazardous to Health (COSHH) Regulations

• European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR)

• International Maritime Dangerous Goods (IMDG) Code

• International Air transport Association (IATA), and

• Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations (CDG)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All ship personnel preparing, conducting, or supervising the inspection of a ballast tank.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing learners with the knowledge for a safe and successful ballast tank inspection.

How will the course benefit my company?

By ensuring ship personnel take the necessary safety precautions to avoid incidents during tank inspection and by providing them with the required knowledge to identify and record any issues with the inspected tank.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

International Safety Management Code (ISM)

ISO 4628 Paint and varnishes

ASTM D610 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All personnel involved in marine operations.

Is previous experience required?

No experience is required to take this course.

How will this course benefit me?

By ensuring you know how to respond to marine trash and debris incidents.

How will this course benefit my company?

By ensuring you know how to respond to marine trash and debris incidents.

What standards are referred to in this course?

US best practise.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Engineers.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course will provide you with an awareness of how a hydraulic system operates.

How will the course benefit my company?

It is intended to provide the knowledge to carry out maintenance of the systems which will help reduce accident.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Maintenance crew.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing you with an awareness of pump construction and operation.

How will the course benefit my company?

By providing personnel with an awareness of pump construction and operation to ensure that pumps are maintained in a good condition

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Maritime personnel who require an introduction to or awareness of vessel structures and potential risk factors.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide crewmembers with an understanding of the structural risk factors and forces acting internally and externally on a vessel.

How will this course benefit my company?

By ensuring you have an understanding of the structural risk factors on a vessel. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Any personnel with a desire to improve their ability to establish and maintain high performance standards onboard.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

Social skills involve respecting social norms and treating others fairly, equitably and honestly, being aware and sensitive to cultural differences and dealing with them effectively. This course presents the perfect opportunity for you as a seafarer to be proactive and showcase that you are ready to meet the industry's modern-day demands.

How will the course benefit my company?

Employers are now incorporating seafarer’s soft skills into their crewing decisions. The soft, ‘non-technical skills’ are increasingly important on board due to the rapidly changing workforce and automation of technical tasks. Additionally, maritime accident investigations indicate that a lack of soft skills and human error is the most common reason behind accidents at sea.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course is suitable for all officer ranks onboard, including:

• Management Level Deck Officers

• Operational Level Deck Officers

• Management Level Engine Officers

• Operational Level Engine Officers

Who is the course for?

All personnel that come into contact with compressed air through maintenance or usage.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring.

How will the course benefit my company?

To reduce compressed air incidents and accidents.

What standards are referenced in the course?

No standard or regulations are referenced in this course

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Deck crew and personnel who require knowledge on the inventory and storage of paints and coatings.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing you with a basic understanding on the inventory and storage requirements of paints and coatings.

How will the course benefit my company?

By providing personnel with a basic understanding on the inventory and storage requirements of paints and coatings.

What standards are referenced in the course?

• The International Convention for the Safety of Life at Sea (SOLAS)

• The Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships

• The European Union Ship Recycling Regulation

• Resolution MEPC.269(68) Guidelines for the Development of the Inventory of Hazardous Materials

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
Management staff and persons with responsibilites related to seafarers.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide an overall understanding of the requirements of the Maritime Labour Convention (MLC) and the responsibilities of managers in relation to achieving, managing and maintaining compliance.

How will this course benefit my company?
By ensuring you have an understanding of the Maritime Labour Convention (MLC) and the resposibilities thereto.

What standards are referred to in this course?
Maritime Labour Convention (MLC2006)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel working in ISPS areas.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with the core knowledge of ISPS rules and regulations applicable to the international ports and harbours.

How will the course benefit my company?

By ensuring that you have the core knowledge of ISPS rules and regulations.

What standards are referenced in the course?

International Ship and Port Facility Security (ISPS) Code

Convention for the Safety of Life at Sea (SOLAS)

Is there an assessment? 

Yes

“Course on fall protection” is a course on the basics of fall protection for anyone working above ground.

This course outlines the laws and regulations related to fall protection. It contains information about active as well as passive protection gear, as well as first aid related to falls from a height. Upon completion of the course one will have information about the various aspects of fall protection. One will also learn how to carry out ones work in a safe and secure manner within the confines of the applicable laws and regulations.

Course Content

- Laws and regulations

- Active and passive fall protection

- First aid

Who is the course for?

All personnel who are involved in the process of the Tanker Management Self Assessment program.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an awareness of TMSA and the audit criteria for the enhancement of safety on board tanker ships.

How will the course benefit my company?

The course will ensure that learners are following best practices as detailed in national/international legislation as well as operator procedures.

What standards are referenced in the course?

International Safety Management (ISM) Code

Oil Operators International Marine Forum (OCIMF)

The International Convention for the Prevention of Pollution from Ships (MARPOL)

The Code of Safe Working Practices for Merchant Seafarers (COSWP)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All relevant personnel, including work party members, Performing Authorities and Area Authorities

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide the knowledge and techniques for carrying out effective toolbox talks

How will this course benefit my company?

By ensuring you have knowledge and know of techniques for carrying out effective toolbox talks

What standards are referred to in this course?

Control of Substances Hazardous to Health (COSHH) assessment

Safety Data Sheets (SDS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Deck Officers and Deck Crew who are involved in using the Emergency Towing Systems (ETS)

Is previous experience required?
No previous experience is required to complete this course. 

How will this course benefit me?
This course aims to provide learners with an introduction to Emergency Towing Systems (ETS) in the Maritime Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all possible precautions are taken to reduce injury to personnel whilst using the ETS.

What standards are referred to in this course?

• The International Convention for the Safety of Life at Sea

• IMO resolution MSC. 35(63) 

• IMO Resolution MSC. 132(75)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel involved in scaffolding operations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with a brief overview of the requirements for safe scaffolding over sea.

How will the course benefit my company?

This course will provide personnel with a brief overview of the requirements for safe scaffolding over sea.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course provides an introduction to the understanding of gas in high risk work situations.  It describes real dangers and explains about the most common types of gas.  The course provides increased understanding and knowledge of elements of risk when working in areas exposed to gas, and knowledge of how best to protect yourself, and others, using proper equipment. Users shall become acquainted with the possibilities and limitations presented by gas measurement equipment, in relevant situations.

Who is the course for?

All relevant personnel.

Is previous experience required?

No experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of US best practice in relation to drug and alcohol awareness in the workplace.

How will the course benefit my company?

This course provides drug and alcohol awareness, information on company abuse, illegal drug use, and the abuse of prescription drugs. 

What standards are referenced in the course?

N/A

Is there an assessment?

Yes

Learning Objectives:

• Identify various types of common drugs

• Find company policies on alcohol and controlled substances

• Explain the various methods of alcohol and drug testing

• Explain the consequences of violating company drug and alcohol use policies

• Describe the effects of alcohol and drugs on the body and job performance

Who is the course for?

All maritime personnel

Is previous experience required?

You do not previous experience to complete this course.

How will the course benefit me?

By providing you with an awareness of how loud noise can have a detrimental effect on your hearing

How will the course benefit my company?

By protecting personnel from hearing loss and improving communication

What standards are referenced in the course?

Maritime Labour Convention (MLC)

UK Maritime and Coastguard Agency’s Code of Safe Working Practices for Seamen.

Is there an assessment?

Yes

Who is the course for?

All Maritime personnel.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

This course will provide knowledge of the risk associated with dropped objects.

How will the course benefit my company?

To assist in the reduction of lost time as a result of accidents.

What standards are referenced in the course?

There are no regulations or standards referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Officers who are looking for an easy-to-follow supplement or refresher to their radar and ARPA courses and anyone requiring knowledge of the general features of radar.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

The course will benefit learners by enhancing their knowledge, skills and confidence in radar plotting and in the use of ARPA during collision avoidance manoeuvres, while being aware of limiting factors.

How will the course benefit my company?

By ensuring that personnel understand both the potential and limitations of radar and ARPA equipment in order to ensure safe operations on board.

What standards are referenced in the course?

• IMO Radar Performance Standards (IMO) (2004): Res.MSC.192(79)

• The International Convention for the Safety of Life at Sea (SOLAS)

• International Telecommunication Union (ITU) Recommendations (ITU (200): Rec.ITU-R.M.1313-1)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Deck Officers.

Is previous experience required?

Previous navigational knowledge is recommended.

How will the course benefit me?

By enabling you to confidently assess navigational situations based on the involved vessels and making sound decisions to avoid collisions based on the appropriate rules.

How will the course benefit my company?

By ensuring navigational officers are able to correctly handle close quarter situations and minimising the risk of collision and non-conformities of vessels.

What standards are referenced in the course?

International Regulations for preventing Collisions at Sea

Is there an assessment?

Yes - Fast Track is a pre-assessment learning tool designed to assess your existing knowledge. The results of this assessment help identify your personal knowledge gaps.

The tool automatically creates a bespoke course to address these knowledge gaps. You will only be given content covering the gaps identified in the pre-assessment.

Your knowledge and understanding is then reassessed.

If you successfully complete all of the Fast Track pre-assessment questions correctly, then your knowledge is deemed complete, and no course content or further assessment will be required.

Who is the course for?

All crew/personnel who are involved in the bunkering of LNG as a fuel.

Is previous experience required?

No previous knowledge is required to complete this course.

How will the course benefit me?

This course will give learners an awareness of LNG bunkering, including the hazards involved and the emergency and firefighting methods and procedures.

How will the course benefit my company?

The course will ensure that learners are following best practices as detailed in national/international legislation and company procedures.

What standards are referenced in the course?

International Safety Management (ISM) Code – safety and pollution prevention, emergency procedures including safe operation of equipment, training, and planned maintenance

International Convention for the Safety of Life at Sea (SOLAS) and Class Requirement

International Code of Safety for Ship Using Gases or Other Low-flashpoint Fuels (IGF Code)

The International Code of the Construction and Equipment of Ships carrying Liquefied Gases in Bulk (IGC Code)

International Convention for the Prevention of Pollution from Ships (MARPOL)

International Convention on Standards of Training, Certification and Watchkeeping for Seafarers 1978 (STCW)

International Safety Guide for Oil Tankers and Terminals (ISGOTT 6) Chapter 24

International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (Gas Carrier Code)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All crew and personnel who operate and carry out maintenance on deck machinery.

Is previous experience required?

It would be an advantage, however, this course acts as a valuable introduction for personnel that are about to be trained in deck machinery and for those working onshore.

How will the course benefit me?

This course will give learners an awareness of deck machinery, how the equipment is used correctly and safely and how the equipment is maintained.

How will the course benefit my company?

The course will ensure that learners are following best practice as detailed in relevant legislation as well as the company procedures.

What standards are referenced in the course?

• International Safety Management (ISM) Code – safety and pollution prevention, emergency procedures including safe operation of equipment, training, and planned maintenance.

• The International Convention for the Safety of Life at Sea (SOLAS) and Class Requirements

• Code of Safe Working Practices for Merchant Seafarers (COSWP)

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Officer Cadets and Junior Deck Officers.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing an insight into the various types of cargo insulation.

How will the course benefit my company?

By ensuring personnel understand safe operations on board a gas carrier.

What standards are referenced in the course?

The International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.